The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

  • PCD8.P5

  • PG5 1.4.300 programming tool

Documentation

PG5 Programming Tool

Technical Info PP26-362 PG5 Programming Tool

 

 

DE08 .pdf 2.06 MB Download
EN08 .pdf 2.06 MB Download
FR08 .pdf 2.06 MB Download
IT08 .pdf 3.21 MB Download

HMI-Editor and PLC-based terminals

Technical Info PP26-430 HMI-Editor and PLC-based terminals

 

 

DE05 .pdf 1.73 MB Download
EN05 .pdf 1.72 MB Download
FR05 .pdf 1.72 MB Download
IT05 .pdf 1.72 MB Download
SV01 Archive .pdf 3.49 MB Download

Manual HMI-Editor PG5 V1.4

Manual 26-768 Manual HMI-Editor PG5 V1.4

 

 

DE09 Archive .pdf 9.66 MB Download
EN09 Archive .pdf 0.37 MB Download
FR09 Archive .pdf 11.39 MB Download

Icon-Editor (HMI Editor)

Manual 26-832 Icon-Editor (HMI Editor)

DE02 Archive .pdf 0.72 MB Download
EN02 Archive .pdf 0.72 MB Download
FR02 Archive .pdf 0.73 MB Download

Saia PG5® FBox Builder

System Info PP26-422 Saia PG5® FBox Builder

 

 

DE04 .pdf 4.05 MB Download
EN04 .pdf 4.03 MB Download
FR04 .pdf 4.04 MB Download
IT04 .pdf 4.05 MB Download

FBox.Builder (Limited Version)

Manual 26-831 FBox.Builder (Limited Version)

DE07 .pdf 2.81 MB Download
EN07 .pdf 2.74 MB Download
FR07 .pdf 2.74 MB Download

FBox.Builder (Full Version)

Manual 26-837 FBox.Builder (Full Version)

 

 

EN05 Archive .pdf 2.46 MB Download

UpDownLoader

Manual UpDownLoader

EN Archive .pdf 0.70 MB Download
IT Archive .pdf 0.43 MB Download

Additional Documentation (Manuals, Workshops) can be found on the Controls Suite CD.

Controls Suite CD, containing PG5 1.4.300 demonstration version for Windows XP or 2000

This version allows to use the full functionality of PG5 and the HMI-Editor for 90 days after the installation. For an installation on Win7 and Windows Vista, please refer to the "Technical reports" section below.

 

Procedure for updating the PG5 1.4 from an earlier version of PG5 1.4.xxx:

  • download version V1.4.300 from this page
  • uninstall the previous version
  • install the version V1.4.300 (the key file that was distributed with previous 1.4.xxx version can still be used.

Download PG5 V 1.4.300 package as on CD

Software Download PG5 V 1.4.300 package as on CD

Release notes PG5 SP 1.4.300

History Document Release notes PG5 SP 1.4.300

EN Archive .pdf 0.05 MB Download

Release notes Web Editor 5.13.00

History Document Release notes Web Editor 5.13.00

EN Archive .pdf 0.62 MB Download

Patches for PG5 V 1.4.300 (not contained in package above)

Readme Patches for PG5 V 1.4.300 (not contained in package above)

Description of the modifications contained in the PG5 1.4.300 patches

EN Archive .txt 0.00 MB Download

Patches

A patch 15 (version 0) has been availabe at this point until may 12th, 2010. Due to a problem of the S-Net Configurator in this patch, it has been removed from this site! Please download the current version patch 15 (version 1) and install it again.

 

Main corrections in PG5

  • In the Device Configurator a correct subnet mask was idicated as invalid
  • The analog outputs of a PCD3.M2130V6 could not be scaled correctly (German language only).
  • When using the Device Configurator port 3 of a PCD3.M5340 could not be used as Master Gateway
  • Help file for the Device Configurator added/improved
  • No error message if fails to write backup file. e.g. when saving a file in the Common Files directory.
  • Patch installer works also for W2k

New features in PG5

  • Support of PCD3 Compact with extension modules.

Main modifications in FBox libraries

  • S-Fup standard FBox library 2.6.150
    - Initialization of FBoxes "High" and "Low" are improved during start-up (XOB16)
    - Support for PCD4.U100
  • S-Fup analog FBox library 2.6.100:
    - Output of PCD2/3.W525 modules did not always work, see FAQ 101204.
  • Heavac library 2.5.316
    - New FBoxes "Fan optimizer PI" and "Fan max Position"
    - New option for "Command FIFO/FILO" FBox; option FILO added
    - New FBox "Dead range with delay", FBox which limits the frequency of value changes
    - New FBox "Easter days" to detect catholic holidays based on Easter
    - Improvements for FBoxes Conversion 2 points and 20 points
    - Translated help for new FBoxes
    - Support for PCD4.U100
  • Belimo MP Bus FBox library 2.5.305:
    - Support of PCD2/3.F281 modules
    - Avoids possible conflict with global symbol with name "Error"
  • FBox library for File System 2.5.307
    - New FBoxes "Write big DB/Text" and "Read big DB/Text"
    - Record and backup interval bigger than 6:55:35 caused assembler error.
  • EIB Library 2.5.312
    - EIB Net/IP driver: multi-telegram buffer implemented.
    - FBox "EIB RCV Time+Date" improved
  • Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version 1.0.017
    - New option to define an offset for the client FBoxes
    - Sometimes an error was indicated even if no error was present, see FAQ 101295
  • Modem FBox library version 2.5.304
    - The calling number can now have the "+" sign for international numbering system (replaces the '!' modem command).
    - The "Init" input of the FBox "Modem Driver" is now dynamized.
  • LON FBox library 2.5.142
    - Data decoding corrected in FBoxes "Rcv Binary" and "Value Rcv"
    - Value convertions improved in FBoxes "Send Heavac Status" and "Rcv Heavac Status"

Remarks

  • Please note that the following FBox libraries are not contained in this patch; please update them manually
    - DDC Suite
    - Room controller PCD7.L6
    - HDLog (to File) FBoxes
    - S-Web Alarming FBoxes
  • It is no longer necessary launching additional files for installing the patch (as it has been the case unitl patch 9).

Patch 15 (version 1) for PG5 1.4.300

Software Patch 15 (version 1) for PG5 1.4.300

This patch applies to PG5 1.4.300 and will also update the below listed FBox libraries.

EN Archive .exe 21.22 MB Download

Web Editor 5.14.30 package for PG5 1.4.300

This package contains the latest Web Editor Package which consists of the following files:

  • Setup for S-Web Editor version 5.14.30
  • FBoxes for Trending to DBs or to the file system (HDLog SP2.1.040)
  • FBoxes for the File system (FileSystem 2.5.307)
  • FBoxes for the Alarming macros of the S-Web Editor

Install the files by launching the "Setup Web Editor V14.exe" from the WebEditor folder as well as the two executables in the folder "FBoxes".
Please note that for the HDLog to File functionality the firmware 1.10.51 is required for PCD2.M5 and PCD3 systems.
For more information regarding the new features, please refer to FAQ 101272.

Web-Editor Package (not included in the PG5 Controls Suite CD)

Software Web-Editor Package (not included in the PG5 Controls Suite CD)

EN Archive .zip 20.92 MB Download

PG5 V 1.4.300 parts

For customers who only need up- or downloading a built PG5 project to a PCD. The S-Online tools are a subset of the PG5 installation and does not require a license. The S-Online tools consist of:

  • Online Configurator (stand-alone configurator for Saia PCD hardware)
  • Command line Up/Downloader (tool for up- and downloading PCD program files)
  • Data Transfer Utility (tool for saving and loading a PCD Registers, Flags, Timers, etc. to/from text files)

Note that all these tools are part of PG5. In case PG5 is already installed, the installation of the S-Online tools won't have any effect.

S-Online tools (included in the PG5 Controls Suite CD)

Software S-Online tools (included in the PG5 Controls Suite CD)

EN Archive .zip 9.68 MB Download

SComm Driver Update 1.4.321 for running PG5 V 1.4.300 on Win7/8 32 Bit and 64 Bit systems

This SComm Driver Update will update the USB driver and the S-Bus driver from your PG5 1.4.300 installation. In order to install it, please execute the following steps:

  • Install PG5 1.4.300
  • Apply the last patch from this page
  • Execute the PG5_1_4_SCommUpdate_1_4_321.exe
    The SCommUpdate must be installed after the patch!

Note that this Update is also required in case you are running PG5 2.0.153 or later!

SComm Driver Update PG5 1.4.300

Software SComm Driver Update PG5 1.4.300

EN Archive .exe 5.45 MB Download

SaiaUSB Info Installation

Technical Info SaiaUSB Info Installation SaiaUSB Info Installation

1.0 Archive .pdf 0.72 MB Download

Technical Reports

Installation and compatibility information for PG5 1.4 & MS Windows 8

Info Installation and compatibility information for PG5 1.4 & MS Windows 8

EN Archive .pdf 0.49 MB Download

Step by step installation guide for PG5 1.4.300 on MS Windows 7 and Vista (32 and 64 bit)

Info Step by step installation guide for PG5 1.4.300 on MS Windows 7 and Vista (32 and 64 bit)

EN3 Archive .pdf 1.67 MB Download

Compatibility Information PG5 1.4 & MS Windows 7

Info Compatibility Information PG5 1.4 & MS Windows 7

Update March 2012: BACnet Configurator is not compatible with Windows7 64bit

EN Archive .pdf 0.04 MB Download

Compatibility Information PG5 1.4 & MS Windows Vista

Info Compatibility Information PG5 1.4 & MS Windows Vista

EN Archive .pdf 0.02 MB Download

Moving projects from PG3 to PG5, example for h-modules

Info Moving projects from PG3 to PG5, example for h-modules

EN Archive .pdf 0.24 MB Download

Please contact your local SBC Sales Company to get more information and/or the current version of this product

Link to contact finder of saia-pcd.com

Good to know

PG5 1.0, 1.1, 1.2 and 1.3 are obsolete, we recommend to use the version 2.0 or 1.4.300 with the latest patch applied
Windows 95, 98, ME and NT are no longer supported by PG5 1.4.xxx or later. PG5 1.3.xxx was the last version to support these outdated operating systems.

Windows 2000: What to do if PG5 cannot be used by normal users after the installation by a super user

Info Windows 2000: What to do if PG5 cannot be used by normal users after the installation by a super user

EN Archive .pdf 0.36 MB Download

Local FAQ Deutschland / PG5 1.4 FBox Libraries

  • Why on PG5 2.1.3xx a timeout errors appear during communication with some MP-Bus units? (FAQ #101897)
  • Why does the FBox for the AWD3 display a wrong current in case a current transformer is used? (FAQ #101528)
  • Are the EnOcean receivers APG03U/B-RS485-Eno supported by the FBox library? (FAQ #101508)
  • Why does the PCD7.L60x Room controller not work correctly in "Master/Slave" mode? (FAQ #101506)
  • Why is the PCD7.L60x occupancy output switching from 1 to 0 when changing a setpoint value? (FAQ #101455)
  • How long can I record data with the "HDLog to File FBox" (in csv format) using a 1 GB SD Card? (FAQ #101437)
  • Problem with the FBox HD Log to File if the dynamic space of registers is defined as <1000 or >=10 000 (FAQ #101429)
  • Why is my library defined in two locations? (FAQ #101425)
  • How to connect a TME Ethernet Thermometer to a PCD over Modbus? (FAQ #101411)
  • When do I have to use the "SASI S-Bus Extended" FBox? (FAQ #101400)
  • Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399)
  • Which devices can I connect using the JCI N2-Bus FBox library? (FAQ #101394)
  • Why is it not possible to change the phone numbers in the "Call SMS" FBox? (FAQ #101315)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • Why do I get a syntax error when using the FBox "PCD7.D120"? (FAQ #101239)
  • How to use the Belimo fan optimizer COU24-A-MP in Fupla? (FAQ #101185)
  • Why does the communication between a PCD and an Omnio "RS232/485 to EnOcean" converter not work? (FAQ #101174)
  • Which FLS (window opening system) devices do work on MP-Bus and which library is needed? (FAQ #101105)
  • Which DALI interface from Tridonic is needed in which case? (FAQ #101104)
  • Is it possible to deactivate the "secure S-Bus Data Mode"? (FAQ #101084)
  • Which FBox is needed for the VRP-M from BELIMO? (FAQ #101024)
  • Why do I get "Fatal error 391: Protected library used: _SBC_JCI_N2BUS"? (FAQ #100974)
  • Updating procedure for JCI N2-Bus (FAQ #100973)
  • Why is it no more possible to build an old Belimo MP-Bus project with PG5 1.4.300? (FAQ #100957)
  • How can DALI deviced be addressed? (FAQ #100863)
  • How are the DALI devices configured? (FAQ #100835)
  • Where from to get FBoxes for the obsolete "RAG-Einzelraumregelung" (FAQ #100820)
  • EIB interface devices supported for FT1.2 and for EIBnet/IP (FAQ #100793)
  • When a new user key is created, is it necessary to get a new licence number from Engiby for Modbus M-Bus etc..? (FAQ #100626)
  • Why does the "Error 335:...Invalid register number" appear on build? (FAQ #100491)

PG5 2.0 / PG5

  • Why it’s not possible to access over serial PGU or S-Bus to the PCD, error message ‘Error 99: Can’t open port comx’ is shown in the PG5 debugger? (FAQ #101977)
  • In PG5, it’s possible to update the initial values of DB elements with the actual online values used on the PCD? (FAQ #101960)
  • Why the S-Bus communication over TCP/IP between PCD’s doesn’t work anymore? (FAQ #101679)
  • Information’s about TAPI modem settings on PG5. (FAQ #100891)
  • Where to find the FAQ's regarding PG5 (FAQ #100006)

PG5 2.0 / Profibus FMS

  • Why after a SASI instruction for Profibus FMS communication, the error flag of the PCD is set to high? (FAQ #101218)
  • What connector and cable typ should be used? (FAQ #100369)
  • UNIGYR PRU / PCD2 (FAQ #100153)
  • RS-485 wiring information (FAQ #100152)

PG5 2.0 / Profibus DP

  • How to read the diagnostic information of a PCD3.W745 on a PCD3.T760? (FAQ #101697)
  • Why does the PCD7.F7500 does not work on the PCD2.M5540? (FAQ #101655)
  • What is the maximum of exchanged data over Profibus DP on a PCD? (FAQ #101642)
  • What is the signification of the I/O words of a PCD2/3.W525 module? (FAQ #101552)
  • Meaning of the LEDs on Profibus DP Master modules and CPUs (FAQ #101271)
  • Does the DP/DP coupler 6ES7 from Siemens work with a PCD system? (FAQ #101253)
  • On the Profibus-DP or Profi-S-IO master, what is the signification of the diagnostic flag SLAVE_ERR? (FAQ #101173)
  • How to configure the Saia PCD® as DP Master, if the Slave is a Siemens CP 342-5? (FAQ #101124)
  • DP/Belimo gateway display error message after program download to the PCD (FAQ #100976)
  • On the Profibus-DP or Profi-S-I/O master it isn't possible to read or write registers with address > 4095 from the slave (FAQ #100927)
  • Too strong limitation imposed by S-Net Configurator (FAQ #100717)
  • Why is the communication between a SBC Master and a Siemens Slave not working (FAQ #100651)
  • change baudrate with SNet configurator (FAQ #100514)
  • Are the modules PCD3.W800, PCD3.A810 and PCD3.A860 supported by the PCD3.T760? (FAQ #100504)
  • Negative values from PCD3.T760 are not interpreted correctly on the PCD (FAQ #100466)
  • Can I use the same GSD File for PCD2.M170 as for PCD4.M170 (FAQ #100412)
  • What connector and cable typ should be used? (FAQ #100369)
  • Supported baudrates and protocols on a PCD2.M480 (FAQ #100355)
  • Incompatibility of old FW and new Profibus DP configurator (FAQ #100319)
  • What Profibus Analyzer should be bought? (FAQ #100298)
  • Error PCD7.F750 " no Diagnostic refresh" (FAQ #100271)
  • How to configure a PCD3.W745 on a PCD3.T760? (FAQ #100214)
  • How to wire a Profibus DP network correctly to a PCD? (FAQ #100164)
  • It's possible to add new groups in to the PG5 Profibus-DP configurator device list? (FAQ #100159)
  • It's possible to use my old GSD data's in new PG5 projects? (FAQ #100157)
  • RS-485 wiring information (FAQ #100152)

S-Web Technology

  • On HTML5 Web-Projects, created with Web-Editor8, why it is not possible to transfer the user and password after a url jump as it was possible on Java/MB? (FAQ #102035)
  • HDLog in WE8: slow navigation (FAQ #101965)
  • What means the error "Out of memory heap 3" (FAQ #101962)
  • Why I get Message Window"Do you want to run this application?" by starting a Webproject? (FAQ #101952)
  • Why IMaster Java Applet no longer run with Chrome? (FAQ #101951)
  • After a „Reload“, the displayed HDLog Trend is not focused on the right, most actual, time (FAQ #101945)
  • Web-Editor8, why the content of the Container variable is not displayed on the web-browser or the MB-display? (FAQ #101925)
  • Why after a update of the Microbrowser Android app to the version 2.0.0_4 the error message 'file not found' is shown? (FAQ #101918)
  • Why the error message ‘no such component found’ is shown on the web page? (FAQ #101917)
  • After the update of Java to Java version 7, (update 6 or 7) a Java warning message is shown on my PC browser when accessing a web page stored on the PCD. (FAQ #101793)
  • How to change the Favicon of a Web Project (FAQ #101782)
  • WebEditor project with HDLog File to flash-memory: macro tries to load a wrong CSV-File (FAQ #101737)
  • Why does the Micro Browser stop working with Error "File not found xxxx.teq"? (FAQ #101724)
  • File written to the file system by the PCD can’t be accessed with HTTP protocol (FAQ #101686)
  • What means the Error-6./alarm.exe?-6&sta failed? (FAQ #101674)
  • Why are the Webserver password levels not working with firmware 1.14.xx or later? (FAQ #101613)
  • How to disable borders and scrollbars when running the Microsoft Internet Explorer in Kiosk mode? (FAQ #101588)
  • Are there known problems when accessing the PCD FTP server with FileZilla? (FAQ #101586)
  • Why doesn't the Web Builder from PG5 2.0 find the license? (FAQ #101585)
  • What do parameters 'speed' and 'priority' mean which get displayed on the status page of the PCD? (FAQ #101513)
  • How long can I record data with the "HDLog to File FBox" (in csv format) using a 1 GB SD Card? (FAQ #101437)
  • How many web-clients can be connected at the same time to the S-Web Server over Ether-S-Bus? (FAQ #101431)
  • Problem with the FBox HD Log to File if the dynamic space of registers is defined as <1000 or >=10 000 (FAQ #101429)
  • Why is the same entry created several times by the "HDLog to File" FBox library? (FAQ #101421)
  • Which GIF-file formats are supported by the SBC S-Web technologies and how can I generate such GIFs? (FAQ #101409)
  • Why is it not possible to compile the project if I add a curve in the HDLog to file macro? (FAQ #101375)
  • Practical settings for the alarming macro in use with DDC Suite (FAQ #101342)
  • How many HDLog trend variables can I log into one single CSV-file? (FAQ #101341)
  • S-Web Editor recommendations for VGA MicroBrowser Panel projects (FAQ #101340)
  • Why does the S-Web Editor warn about deletion of unused HTML tags in csv-file? (FAQ #101338)
  • How can I prevent the Java Applet to be re-loaded when displaying my WebEditor created web pages? (FAQ #101288)
  • Why do I get an error message "Internal symbols not defined" when building a PG5 project with HDLog file FBoxes? (FAQ #101263)
  • Why is it not possible to compile a PG5 project containing a Web-Builder file on a PC with Chinese Windows? (FAQ #101250)
  • Why is the webpage not displayed? Class not found exception (FAQ #101230)
  • It’s possible to protect my web pages stored on the PCD, so that they can’t be copied? (FAQ #101229)
  • How to load a web application from a PCD/PCS (without Ethernet port) to a remote PC with the use of a CE web-panel? (FAQ #101215)
  • Why is the webpage not displayed? Class not found exception. Strange characters are displayed on top of the webpage. (FAQ #101200)
  • What is the "WebServer2" on Saia PCD® COSinus systems? (FAQ #101191)
  • Has the Web Server Time Allocation any influence? (FAQ #101179)
  • How to hide the address bar on the IE7 or to put IE7 in to full screen mode? (FAQ #101148)
  • Why the webpage is not displayed on the web-browser of the PC? Error message "Class not found" is displayed (but working fine on MB-webpanel) (FAQ #101142)
  • Why my Web-Application is no more reacting after clicking on "Save Logs to file" button? (FAQ #101035)
  • Why do the values on an eXP Web Panel freeze? (FAQ #100975)
  • Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page? (FAQ #100963)
  • Why are the alarm texts not displayed? (FAQ #100934)
  • Is it possible to store the web pages on a Web Panel? (FAQ #100931)
  • Can I store files locally on a MB Panel (in order to increase communication performance)? (FAQ #100924)
  • Does the Web-Editor allow to access array variables of PG5 symbolic names? (FAQ #100915)
  • Is it possible to use symbolic names of PG5 resources on the Web-Editor if container offset is used? (FAQ #100914)
  • How to use registers with addresses > 9999 on a web project? (FAQ #100913)
  • Is it possible to know on the PCD if the Web-Application on a Web-Panel is running? (FAQ #100909)
  • Why is the web-Server on the PCD is accessible over two different socket ports? (FAQ #100900)
  • How to set the index of the Alarmlist FBox? (FAQ #100876)
  • How to uninstall the Webserver password page? (FAQ #100873)
  • Negative values with decimal point are not displayed correctly on the CE panel (FAQ #100842)
  • S-Web Editor 5.13.00 dependencies (FAQ #100810)
  • Why are the Webpages not always displayed? How to adjust the timeout of the WebServer? (FAQ #100808)
  • Is it possible to run another application (Internet Explorer) from the Microbrowser on a CE panel? (FAQ #100768)
  • Installed F-Boxes are not available (FAQ #100723)
  • Applet malfunction after installing Sun Java Platform Edition 6 (Version 1.6) (FAQ #100708)
  • Internet Explorer 7 does not support FTP connection (FAQ #100703)
  • Alarming: When OnLine in fupla, FBox 10 Alarm displays xxxx instead of the values! (FAQ #100694)
  • The PCD goes in HALT with a BUS ERROR if many accesses to the WebServer are executed (FAQ #100658)
  • Why is the Internet Browser frozen after a few hours (FAQ #100648)
  • Why is the message "syntax error" / "syntax error in tag" displayed instead of a value (FAQ #100632)
  • Why are negativ values not displayed correctly? (FAQ #100630)
  • URL Jump doesn't work with Microbrowser CE Terminal (FAQ #100617)
  • What file names are allowed in the Web-Editor (FAQ #100552)
  • Why is the message: "cannot create page content yet" appears from time to time (FAQ #100527)
  • If I want to display Web pages on a PCD Web Panel CE, what is the difference between the use of Internet Explorer and the Micro Browser? (FAQ #100506)
  • How to use the display of the MicroBrowser on the PCD Web Panel CE in full screen mode? (FAQ #100505)
  • How to store a web page content which was uploaded from the PCD in to a Excel sheet? (FAQ #100476)
  • Why does the error message "Can't generate ...web.itq length is 0" appers when generating a file with the Webbuilder? (FAQ #100429)
  • PCD2.M170 or PCS1: WEB Server works only if a WEB project is downloaded in the PCD! (FAQ #100380)
  • Why does the web page show "No component selected" instead of the media value? (FAQ #100379)
  • What tools/technology should be used to create pages for the SBC-S-Web concept? (FAQ #100020)

Software (except PG5) / SCOMM

  • Are SBC devices affected by the zero-day vulnerabilities ‘Ripple20’, related to the low-level TCP/IP software library developed by Treck, Inc.? (FAQ #102036)
  • Can PG5 access more than 32 serial communication ports (ComPorts)? (FAQ #101339)
  • Information’s about TAPI modem settings on PG5. (FAQ #100891)
  • Memory leak from SCOMM on Windows XP (FAQ #100875)
  • SCommDll fails with strange status on multi core CPUs (FAQ #100674)
  • ScommDll doesn't work because of firewall software (FAQ #100323)
  • How to set up the SComm to connect a PCD over a server? (FAQ #100248)
  • Compatibility of the S-Bus OPC-Server with PG5 1.2 and PG5 1.3 (FAQ #100240)
  • Driver not available for user when OPC server was started by OPC client (FAQ #100238)
  • Is a driver for SBC S-Bus available? (FAQ #100179)

S-Web Technology / ADSL

  • Why are the horizontal and vertical lines in web pages created with PG5 2.3.175 and displayed in HTML5 Runtime or TEQ Runtime not displayed horizontally/vertically, but 'skewed' with an offset of one pixel? (FAQ #102055)
  • How to set up DynDNS on a router? (FAQ #101197)
  • How to know the IP Address of a device addressed with an URL? (FAQ #101064)
  • How to connect a PCD behind an (A)DSL router? (FAQ #101007)
  • How I have to configure my ADSL router? (FAQ #100454)
  • How can I know the TCP/IP address of a public e-mail server? (FAQ #100453)
  • Experiences with ADSL Routers (FAQ #100203)

S-Web Technology / Android- and iPhone Apps

  • Why are the horizontal and vertical lines in web pages created with PG5 2.3.175 and displayed in HTML5 Runtime or TEQ Runtime not displayed horizontally/vertically, but 'skewed' with an offset of one pixel? (FAQ #102055)
  • On PG5 2.3.192 projects, why the Web-Editor login macro does not work well if the web page is displayed on SBC Microbrowser Web-Panels or Windows Microbrowser App? (FAQ #102053)
  • Why does suddenly the Microbrowser-App on my iOS Apple device or Android device not work anymore, error message ‘unable to Verify App’ is shown on the device? (FAQ #102023)
  • Why after a update of the Microbrowser Android app to the version 2.0.0_4 the error message 'file not found' is shown? (FAQ #101918)
  • Is it possible to increase the Heap size for the SBC Micro Browser App for Android smartphones/tablet? (FAQ #101851)
  • Is there an Android application to display S-Web editor projects on Android devices? (FAQ #101794)
  • Why can't I see the content of the PCD WebServer on my Android- or iPhone App? (FAQ #101777)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download