The PCD goes in HALT with a BUS ERROR if many accesses to the WebServer are executed

FAQ #100658

After a few houres or days the PCD3 goes in HALT with a BUS ERROR.

 

Problem
The PCD3 goes in HALT with a BUS ERROR after a few hours or days. After a power off / on it works again for a while

Reason
This can happen if many accesses to the WebServer are executet and a firmware <030 or <$2A is in use.

Solution
Update the firmware to 030 or $2A

 

Categories

S-Web Technology

Last update: 30.05.2015 01:15

First release: 09.01.2007 10:07

Views: 1506

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download