• PCD3.Mxxx0

  • Central processing units

Documentation

System Catalogue : PCD3

Extract 26-215_A0120 System Catalogue : PCD3

Chapter:
Automation Stations - PCD3

ENG18c .pdf 4.66 MB Download
FRA18c .pdf 4.67 MB Download
GER18c .pdf 4.69 MB Download
ITA18c .pdf 4.67 MB Download

PCD3.M3120 - CPU basic module up to 64 I/O

Datasheet PP26-447 PCD3.M3120 - CPU basic module up to 64 I/O

PLC with 128 KBytes of user memory
Backup with internal Flash memory, USB port for PG5
max. 64 digital I/Os (not expandable), 2 interrupts, Web-Server,
RS-485 for Profi-S-Net or S-Bus, Ethernet TCP/IP

ENG08 .pdf 0.38 MB Download
FRA08 .pdf 0.39 MB Download
GER08 .pdf 0.39 MB Download
ITA08 .pdf 0.39 MB Download

PCD3.M3160 - CPU basic power module up to 64 I/O

Datasheet PP31-666 PCD3.M3160 - CPU basic power module up to 64 I/O

PLC with 512 KBytes of user memory, Backup with internal Flash memory, USB port for PG5
max. 64 digital I/Os (not expandable), 2 interrupts, Web-Server,
RS-485 for Profi-S-Net or S-Bus, Ethernet TCP/IP

ENG03 .pdf 0.36 MB Download
FRA03 .pdf 0.37 MB Download
GER03 .pdf 0.37 MB Download
ITA03 .pdf 0.38 MB Download

PCD3.M3330 - CPU basic module up to 1023 I/O

Datasheet PP31-660 PCD3.M3330 - CPU basic module up to 1023 I/O

PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system,
CPU with 512 KByte user program, backup with on-board Flash memory, USB port for PG5,
up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus

ENG02 .pdf 0.37 MB Download
FRA02 .pdf 0.37 MB Download
GER02 .pdf 0.37 MB Download
ITA02 .pdf 0.39 MB Download

PCD3.M3360 - CPU basic power module up to 1023 I/O

Datasheet PP31-661 PCD3.M3360 - CPU basic power module up to 1023 I/O

PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system,
CPU with 512 KByte user program, USB port for PG5, up to 1024 I/O, 2 interrupt inputs,
RS-485 for Profi-S-Net or S-Bus

ENG02 .pdf 0.37 MB Download
FRA02 .pdf 0.37 MB Download
GER02 .pdf 0.37 MB Download
ITA02 .pdf 0.38 MB Download

PCD3 Hardware

Manual 26-789 PCD3 Hardware

ENG21 .pdf 16.34 MB Download
FRA21 .pdf 15.65 MB Download
GER21 .pdf 17.97 MB Download
ITA21 .pdf 15.28 MB Download

File System and FTP Server

Manual 26-855 File System and FTP Server

ENG08 .pdf 2.25 MB Download
IT07 .pdf 3.35 MB Download

IO-Modules

Manual 27-600 IO-Modules

I/O modules for the series PCD1 | PCD2 and PCD3

ENG10 .pdf 18.74 MB Download
FRA10 .pdf 17.08 MB Download
GER10 .pdf 19.21 MB Download
ITA10 .pdf 18.80 MB Download

Systemcable and adapter

Manual 26-792 Systemcable and adapter

ENG07 .pdf 2.05 MB Download
FRA07 .pdf 3.47 MB Download
GER07 .pdf 3.44 MB Download
ITA07 .pdf 3.46 MB Download

PCD3.F1xx & PCD3.F2xx - Communication modules

Manual 26-857 PCD3.F1xx & PCD3.F2xx - Communication modules

ENG07 .pdf 3.78 MB Download
FRA07 .pdf 3.79 MB Download
GER07 .pdf 3.81 MB Download
ITA07 .pdf 3.78 MB Download

TCP/IP - Ethernet for the Saia PCD® Serie

Manual 26-776 TCP/IP - Ethernet for the Saia PCD® Serie

ENG13 .pdf 21.09 MB Download
FRA13 .pdf 20.91 MB Download
GER13 .pdf 10.50 MB Download
IT03 Archive .pdf 4.43 MB Download

TCP/IP-Enhancements

Manual 26-867 TCP/IP-Enhancements

ENG05 .pdf 3.55 MB Download
FRA05 .pdf 3.47 MB Download
GER05 .pdf 3.51 MB Download

Leaflet: PCD3.M3xxx

Readme 35-012 Leaflet: PCD3.M3xxx

Saia PCD3.M3xxx controller

ENG06 .pdf 0.10 MB Download

App notes incl. examples PPP, DHCP, DNS and SNTP

Info Application Notes App notes incl. examples PPP, DHCP, DNS and SNTP

DE3 Archive .zip 14.95 MB Download
EN3 Archive .zip 14.73 MB Download

Software / Tools

GSD Files

Software GSD Files

GSD files for SBC slaves

EN .ZIP 0.81 MB Download

EPLAN product macros, DWG and DXF files can be found here

Softwaretool for printing on the Labeling-Strips for PCD3-Modules: Please use the Device Configurator from PG5 2.0.

Firmware used in production

The COSinus FW 1.22.xx or higher is available from the COSinus firmware page.

The firmware for older hardware versions is also available from the COSinus firmware page.

Please check the Hardware dependencies table and do read the relase notes before updating the firmware.

 

 

When upgrading from firmware 1.10.xx or 1.14.xx to 1.16.xx/1.20.xx or higher the memory of the PCD will be lost, see FAQ 101535.

 

For BACnet users: Note that the BACnet firmware needs to be compatible to the PCD firmware. Please refer to the firmware page for a compatible package. 

Good to know

To use PCD3.M3160, PCD3.M3360 or PCD3.M5360, PG5 2.2.130 or newer is required.

When upgrading from firmware 1.10.xx or 1.14.xx to 1.16.xx/1.20.xx or higher the memory of the PCD will be lost, see FAQ 101535.

The differences between firmware version 1.22.46 and 1.24.09 are listed in FAQ 101921.

The differences between firmware version 1.16.69 and 1.22.46 are listed in FAQ 101820.

The differences between firmware version 1.14.23 and 1.16.69 are listed in FAQ 101624.

The differences between firmware version 1.10.61 and 1.14.23 are listed in FAQ 101470.

The differences between firmware version 1.10.51 and 1.10.61 are listed in FAQ 101589.

When using flash cards on the PCD it is strongly recommended updating to the latest firmware, see FAQ 101377 and FAQ 101559.

PCD3 / Mxxx

  • How to know whether the circuit board of the PCD is fitted with a Swissbit micro-SD memory card? (FAQ #102070)
  • How to copy csv-Files and Webeditorproject files which are stored on the Intflash of a PCD, if you are replacing an internal micro-SD memory card which is used on the circuit board of the PCD? (FAQ #102069)
  • What is stored on the micro-SD memory card which is used on the circuit board of the PCD? (FAQ #102068)
  • How can the micro SD memory card on the circuit board of a PCD controller be replaced? (FAQ #102067)
  • Why are the inputs and outputs of a PCD3 systems not switched on and off correctly, or switched on and off randomly, or the I/O status not detected correctly in the PLC? (FAQ #102063)
  • It's possible to connect SBC PCD's directly to the internet? (FAQ #102060)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102058)
  • On a PCD2.M4560 or PCD3.M5560, why the measured PT100 temperature values are not correct if the PT100 sensors are connected to PCD2.W220Z18 or PCD3.W220Z18 modules? (FAQ #102052)
  • Why on a PCD3.M5/6xxx or a PCD2.M45xx the battery LED is switched on and the battery error message is activated in the application program after a new battery was inserted? (FAQ #102039)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102010)
  • Remark about the firmware update on PCD3.M6860 or PCD3.M6880 CPU’s (FAQ #101988)
  • What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
  • It’s possible to suppress the PCD Alarms on BACnet? (FAQ #101975)
  • How to configure the analogue inputs of a PCD3.M90 to be able to connect an NTC10k temperature sensor? (FAQ #101974)
  • Why it’s no more possible to set the PCD3.Mxx6x in the firmware download mode with the help of the run/stop switch? (FAQ #101948)
  • How does the battery / power-up check work on the PCD? (FAQ #101929)
  • What are the differences between the COSinus firmwares FW 1.22.48 and FW 1.24.69? (FAQ #101921)
  • Why the status overflow flag of the onboard analogue inputs of the PCD1.M0, PCD1.M2, PCD3.M2x30V6 (PCD3 Compact) and PCD3.M2x30A4Tx (PCD3 WAC) does show an over-flow in the middle of the measurement? (FAQ #101864)
  • It's possible to connect a Ethernet Port of a PCD directly to Power over Ethernet (PoE)? (FAQ #101847)
  • Why is there an offset to the current PCD time in the Trending timestamp of a Web project if the FW 1.20.nn is used? (FAQ #101834)
  • What does the history message 'MEMORY LOST n' mean? (FAQ #101830)
  • On PCD2.M5 and PCD3 CPU's without Ethernet port and equipped with the FW 1.20.25, it's not possible to communicate over the port 0 and 1. (FAQ #101823)
  • What are the differences between firmware 1.16.69 and COSinus FW 1.22.61? (FAQ #101820)
  • Why the MPI adapter doesn’t work on the MPI port of the PCD3.M5547, PCD3.M5567, PCD3.M5540, PCD3.M5440 or PCD3.5560? (FAQ #101814)
  • On a NT PCD the S-Bus slave gateway port doesn't communicate after programm restart of the gateway PCD! (FAQ #101802)
  • Which Texts are writeable/editable during Runtime on a PCD? (FAQ #101801)
  • Lifetime expectancy of the Renata Lithium battery on recent PCD compared to previous PCD generations (FAQ #101780)
  • How the RS485 bus is terminated if on a PCD3.M5340 the bustermination of the port 3 is activated? (FAQ #101753)
  • What is the signification of the history entry "Resisters Fail"? (FAQ #101722)
  • Why is the modem "MDLS144 onbit" no longer working on a new PCD? (FAQ #101718)
  • Why does the PCD no longer run due to "BNt FAIL AI00006"? (FAQ #101712)
  • Why does the user program no longer work correctly after a restore from flash? (FAQ #101680)
  • What is the article number of the PCD3.M5/6 onboard battery module? (FAQ #101675)
  • Why is it no longer possible to switch on/off the digital outputs of the PCD3.Compact after installing PG5 SP2 (PG5 2.0.200)? (FAQ #101663)
  • Why is it no longer possible to switch on/off the relay outputs of the PCD3.WAC after installing PG5 SP2 (PG5 2.0.200)? (FAQ #101659)
  • Why I get the error message "NAK response" during a program download (with PG5 SP2)? (FAQ #101656)
  • Why has the PCD lost the program while updating the firmware to 1.16.xx? (FAQ #101625)
  • What are the differences between firmware 1.14.23 and 1.16.69? (FAQ #101624)
  • What for is the "Extension memory backup size" in the Device Configurator used? (FAQ #101623)
  • How does the "Backup user program to file system" on PCD3 and PCD2.M5 work? (FAQ #101622)
  • Why does the SMS transmission on a PCD3 WAC sometimes fail? (FAQ #101564)
  • Why is the "GPRS Status" of the WAA library not always updated? (FAQ #101545)
  • Important remark when updating the PCD firmware from 1.10.xx or 1.14.xx to 1.16.xx/1.20.xx (FAQ #101535)
  • Why is the USB communication to my PCD lost after a program download? (FAQ #101518)
  • What do parameters 'speed' and 'priority' mean which get displayed on the status page of the PCD? (FAQ #101513)
  • How to extend the amount of available Flags on a PCD? (FAQ #101447)
  • How long does the SuperCap of the PCD3.M3xxx protect the media and RTC from being lost? (FAQ #101426)
  • What are the reasons for a "Bus Error" on a PCD2.M5 or a PCD3? (FAQ #101418)
  • Firmware dependencies for the "DB Access Library" (FAQ #101372)
  • How to configure a Profi-S-I/O network with a PCD3.M2 as master? (FAQ #101367)
  • Why are the inputs 8100 and 8101 continously "high" in my fupla file? (FAQ #101363)
  • Why is it not possible to choose minimal and maximal value in the device configurator for the PCD3 compact? (FAQ #101311)
  • Why can't I add an extension module to my PCD3 compact? (FAQ #101303)
  • Why does the PCD go into halt when using temporary data (TEQU)? (FAQ #101293)
  • Meaning of the error codes for DB backup to flash (FAQ #101284)
  • Why are the DBs not correctly restored after a "restore program from flash"? (FAQ #101279)
  • Meaning of the LEDs on Profibus DP Master modules and CPUs (FAQ #101271)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • What happens if I use the I/O address 255 as Input or Output of a PCD3? (FAQ #101252)
  • Is it possible to use an encoder on PCD3.M2x30V6? (FAQ #101237)
  • Can I detect the CTS signal on port 3 of a PCD3.M5340 (in RS422 mode)? (FAQ #101170)
  • How to download the configuration of the PCD3.M2xxx (FAQ #101167)
  • Is parity mode working on all ports of PCD3 and PCD2.M5 CPU? (FAQ #101103)
  • Why it's not possible to use the whole memory of a file system on flash? (FAQ #101082)
  • Where can I plug flash memory modules on a PCD3 CPU? (FAQ #101027)
  • Why is the port 2 of the PCD3.Mxxx no longer working? (FAQ #101026)
  • The PCD3.M6440 is not available in the Hardware Settings (FAQ #100987)
  • How to reset a PCD3 system? (FAQ #100954)
  • Why does the MAC address shown on the sticker not have 12 digits? (FAQ #100946)
  • Why can't I change the Profi-S-Bus address on a PCD3.M6540 Port 2? (FAQ #100941)
  • Why is the 1 MB internal flash memory with file system not available on PCD3.M2130V6? (FAQ #100874)
  • Is it possible to use the cable PCD2.K106 between PCD3.Mxxxx and PCD2.Cxxx ? (FAQ #100804)
  • Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480 (FAQ #100798)
  • What is the article number of the orange 8-pol cage clamp connector (power supply connector) of the PCD3.M3/5 CPU? (FAQ #100789)
  • Why is the Port 3 on the PCD3.M5340 not running correctly in RS 485 mode? (FAQ #100765)
  • Why can't I connect a PCD3.M5xx0 over the serial PGU port? (FAQ #100737)
  • Tool to test if IP ports are blocked by Router of Firewalls (FAQ #100729)
  • PCD3.Mxxxx Real Time Clock (RTC) corruption (FAQ #100712)
  • Backup and restore Text/DB doesn't work with the SYSWR K 3x00 calls on the onboard Flash of the PCD3? (FAQ #100702)
  • Conflict between communication module (PCD3.F1xx) and memory module (PCD3.Rxxx) (FAQ #100636)
  • Is it possible to connect non-SBC devices on a Profi S-I/O network? (FAQ #100596)
  • Why is the error LED on after having sent an SMS message? (FAQ #100582)
  • Userprogram update with PCD7.R500 (FAQ #100515)
  • Why does the "Error 335:...Invalid register number" appear on build? (FAQ #100491)
  • Where does a "Backup User Program to flash" write the backup? (FAQ #100452)
  • Multi protocol functions for Profibus DP, Profi-S-IO and Profi-S-bus using port 10 or port 2 on a PCD3.Mxxxx. (FAQ #100409)
  • New systems do not support the baudrates below 1200Baud (FAQ #100394)
  • HMI Editor and PCD3.M_ or PCD2.M480: Wrong characters are display instead of value with Format #####! (FAQ #100360)
  • Why can't I use registers above 8191 with the Modbus FBox library from Engiby? (FAQ #100354)
  • Which subnet masks are allowed for a TCP/IP configuration of a PCD? (FAQ #100318)
  • MPI communication on the Profi-S-Net port of a PCD2.M480, PCD2.M5xxx or PCD3.Mxxxx (FAQ #100284)
  • Download of the wrong FW to a PCD3 possible (FAQ #100259)

PCD3 / _Firmware Classic

  • It's possible to connect SBC PCD's directly to the internet? (FAQ #102060)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102058)
  • On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031)
  • Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
  • PCD Firmware 1.28.16 or 1.24.69 fix the Ethernet frame padding information leakage (FAQ #102011)
  • What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102010)
  • Lon Bindings lost after power off / on with FW 1.26.15 (FAQ #101999)
  • What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
  • What is the meaning of the PCD history entry ‘FWDnld UnknownFW’? (FAQ #101959)
  • MUKE error 100xxxxxH (FAQ #101933)
  • How to find more information based on the error message "SF not loaded"? (FAQ #101568)
  • What does CSF stand for? (FAQ #101566)
  • What are the differences between firmware 1.10.51 and 1.14.23? (FAQ #101470)
  • Why can't I send more than 512 bytes using the STXT instruction? (FAQ #101468)
  • Can I have more than 16 COBs? (FAQ #101467)
  • Why is the error bit 7 or 8 set when I try to execute a "Backup DB to flash"? (FAQ #101466)
  • What are the differences between firmware 1.10.16 and 1.10.51? (FAQ #101422)
  • How to define a comma as separator in interpreted texts? (FAQ #101392)
  • Potential data loss on SD cards bigger than 256 MBytes (FAQ #101377)
  • Is the "full duplex" mode supported by the Ethernet ports of a PCD? (FAQ #101365)
  • Overview of the current production firmware versions (FAQ #101304)
  • What does "Saia PCD® COSinus" stand for? (FAQ #101297)
  • How to implement a software watchdog (FAQ #101285)
  • Why does the S-I/O communication no longer work on a PCD3 or a PCD2.M5? (FAQ #101244)
  • What is the "WebServer2" on Saia PCD® COSinus systems? (FAQ #101191)
  • Can I calulate with IEEE floating point values on a PCD system? (FAQ #101188)
  • Can I read a value from a PCD text and copy it into a register? (FAQ #101187)
  • Is it possible to search an expression within a PCD text? (FAQ #101186)
  • The XOB 8 is no longer called on the systems Saia PCD® COSinus. (FAQ #101137)
  • Why does the communication on the PCD3.F281 not work? (FAQ #101090)
  • Why does a "KRNL ERROR" or a "SWTO Error" occur? (FAQ #101069)
  • What criterias are to be fulfilled for sending e-Mails from the PCD? (FAQ #101054)
  • Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page? (FAQ #100963)
  • Is it possible reading the PCD "IP address" from the user program? (FAQ #100952)
  • How does the system watchdog work? (FAQ #100908)
  • How to dump the memory of a PCD (with Saia PCD® COSinus firmware)? (FAQ #100833)
  • Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480 (FAQ #100798)
  • Why is the Port 3 on the PCD3.M5340 not running correctly in RS 485 mode? (FAQ #100765)
  • Download of PCD3 firmware fails on END command (NAK response) (FAQ #100742)
  • New firmware version names for Saia PCD® COSinus systems (a.bb.cc) (FAQ #100741)
  • Why can't I connect a PCD3.M5xx0 over the serial PGU port? (FAQ #100737)
  • PCD3.Mxxxx Real Time Clock (RTC) corruption (FAQ #100712)
  • Can I use the character mode with XON/XOFF protocol on NT-PCD's? (FAQ #100700)
  • Download of PCD3 firmware fails on END command (no response) (FAQ #100681)
  • Download of PCD3 firmware fails with "NAK response" (FAQ #100679)
  • Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems (FAQ #100655)
  • Conflict between communication module (PCD3.F1xx) and memory module (PCD3.Rxxx) (FAQ #100636)
  • allowed Firmware for PCD3.M5540 hardware version D (FAQ #100590)
  • Intelligent modules aren't correctly detected on HW version older than "D" (FAQ #100549)
  • Why is the message: "cannot create page content yet" appears from time to time (FAQ #100527)
  • PCD8.K120 doesn't work after FW download to PCD3 (FAQ #100524)
  • Why does "Sasi Slave" on Port 1 / 0 (RS232) of the PCD3 generate an error? (FAQ #100420)
  • PCD3 problem with "Real TIME CLOCK" Firmware V010 (FAQ #100387)
  • lose Hardware settings after Firmware update (FAQ #100366)
  • FW depending differences in the handling of the diagnosic flags (FAQ #100321)
  • Error LED of PCD is lit! How to find the problem? (FAQ #100269)
  • Download of the wrong FW to a PCD3 possible (FAQ #100259)
  • What EPROM burner is recommended to create firmware chips for PCD's? (FAQ #100256)
  • Firmware version naming of non-Saia PCD® COSinus systems (FAQ #100176)
  • Not all History entries can be found in the Online Help of PG5 (FAQ #100173)
  • Why is the instruction DSP not supported on Saia PCD® COSinus systems? (FAQ #100034)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download