Why can't I send more than 512 bytes using the STXT instruction?
FAQ #101468
In case a text with more than 512 bytes is sent with a firmware older than 1.14.23 the according text has not been sent correctly.
Symptom
When sending a text with a length of more than 512 bytes on a PCD3 or a PCD2.M5 with a firmware older than 1.14.23 the text which is sent is not correct.
In case the text to be sent contains sub-texts which are introduced using interpreted text (e.g. the $Lnnnn) and the final length to be sent is more than 512 bytes, the same phenomenon can be observed.
Solution
Please update the firmware of your PCD to version 1.14.23 or later.
Categories
PCD2 / _Firmware Classic
PCD3 / _Firmware Classic
Local FAQ Deutschland / SEdit (IL programming)
PG5 2.0 / SEdit (IL programming)
Last update: 28.05.2015 08:20
First release: 21.07.2010 18:02
Views: 41797