Why the MPI adapter doesn’t work on the MPI port of the PCD3.M5547, PCD3.M5567, PCD3.M5540, PCD3.M5440 or PCD3.5560?

FAQ #101814

The external MPI adapter which can be connected to the MPI Port of the PCD does need to be supplied with 24VDC.

Depending of the hardware version of the PCD, on some FW this 24VDC supply on the MPI doesn’t work.

 

The table below does show the dependency between the hardware and the firmware in relation with the 24VDC supply on the MPI port.
Classic PCD

PCD3.M5540
PCD3.M5440

FW 1.16.52

FW >= 1.16.69

HW F     

ok

ok

HW G1 

No 24V on MPI

ok


PCD3.M5560

FW 1.16.52

FW >= 1.16.69

HW A1

ok

ok

HW B     

No 24V on MPI

ok


xx7 PCD

PCD3.M5547

FW 1.10.17

FW >= 1.16.61

HW F     

ok

ok

HW G1   

No 24V on MPI

ok


PCD3.M5567

FW 1.16.50

FW >= 1.16.71

HW A1   

ok

ok

HW B     

No 24V on MPI

ok

Categories

PCD3 / Mxxx

xx7 Series / CPU and operating system

Last update: 23.05.2015 00:36

First release: 01.02.2013 14:16

Views: 5919

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download