Datasheets to products
ALD1D5FM00A3A00 - 1-ph. e-meter direct, M-Bus
| Datasheet | PP26-530 | ALD1D5FM00A3A00 - 1-ph. e-meter direct, M-Bus |
Main features
- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- M-Bus Interface to query the data
- Reactive power available through interface
- Up to 250 meter can be connected to the M-Bus Interface
- 7-digit display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
| ENG08 |
|
1.25 MB | Download | ||
| FRA08 |
|
1.25 MB | Download | ||
| GER08 |
|
1.26 MB | Download | ||
| ITA08 |
|
1.25 MB | Download |
ALD1D5FS00A3A00 - 1-ph. e-meter direct, S-Bus
| Datasheet | PP26-523 | ALD1D5FS00A3A00 - 1-ph. e-meter direct, S-Bus |
Order Number
Standard Version: ALD1D5FS00A2A00
MID Version: ALD1D5FS00A3A00
Sealing caps: 4 104 7420 0
Main features
- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- S-Bus Interface to query the data
- Reactive power and cos PHI available through interface
- Up to 254 meter can be connected to the S-Bus Interface
- 7-digit display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
| ENG07 |
|
1.06 MB | Download | ||
| FRA07 |
|
1.05 MB | Download | ||
| GER07 |
|
1.05 MB | Download | ||
| ITA07 |
|
1.06 MB | Download |
Single-phase energy meter ALD1 with Modbus
| Datasheet | PP26-529 | Single-phase energy meter ALD1 with Modbus |
ALE3B5FM00C3A00 - 3-ph. e-meter direct, M-Bus - bidi
| Datasheet | PP31-024 | ALE3B5FM00C3A00 - 3-ph. e-meter direct, M-Bus - bidi |
3-phase energy meter ALE3 with M-Bus (bidirectional)
Order number
MID version: ALE3B5FM00C3A00
Sealing cap: 4 104 7485 0
Specifications
- 3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- Direct metering to 65 A in both directions of current
- Display of the active power, voltage and current per phase
- Display of the total active power
- M-Bus interface used to query data
- Idle power per phase or total available via the interface
- Up to 254 energy meters can be connected to a single M-Bus interface.
- 7-digit LCD display for energy supply and feeding back
- Can be sealed and is provided with a sealing cap as an accessory
- Accuracy class B in accordance with EN50470-3, Accuracy class 1 in accordance with IEC62053-21
| ENG05 |
|
3.63 MB | Download | ||
| FRA05 |
|
3.64 MB | Download | ||
| GER05 |
|
3.64 MB | Download | ||
| ITA05 |
|
3.64 MB | Download |
ALE3D5FM10CxA00 - 3-ph. e-meter direct, M-Bus
| Datasheet | PP26-520 | ALE3D5FM10CxA00 - 3-ph. e-meter direct, M-Bus |
Main Features:
- 3-phase energy meter, 3 × 230/400 VAC 50 Hz
- Direct measuring up to 65 A
- Display of energy, power, voltage and current
- Display of the total active power
- M-Bus interface to retrieve the data
- Reactive power per phase or total, available via M-Bus interface
- Up to 250 meters can be addressed trough primary addresses
- 7-character display
- Can be sealed with sealing cap (optional)
- Accuracy class B according to EN50470-3, Accuracy class 1 according to IEC62053-21
| ENG08 |
|
2.98 MB | Download | ||
| FRA08 |
|
2.99 MB | Download | ||
| GER08 |
|
2.99 MB | Download | ||
| ITA08 |
|
2.99 MB | Download |
3-phase energy meter ALE3 with Modbus
| Datasheet | PP26-527 | 3-phase energy meter ALE3 with Modbus |
AWD3D5WM00C3A00 - 3-ph. e-meter indirect, M-Bus
| Datasheet | PP26-521 | AWD3D5WM00C3A00 - 3-ph. e-meter indirect, M-Bus |
Main Features:
- 3-phase energy meter, 3 × 230/400 VAC 50 Hz
- Measurement through a current transformer up to 1500 A
- Display of energy, instantaneous power, voltage and current
- Display of the total active power
- M-Bus interface to retrieve the data
- Reactive power per phase or total, available via M-Bus interface
- Up to 250 meters can be addressed trough primary addresses
- 7-character display
- Can be sealed with sealing cap (optional)
- Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
| ENG07 |
|
3.00 MB | Download | ||
| FRA07 |
|
2.99 MB | Download | ||
| GER07 |
|
2.98 MB | Download | ||
| ITA07 |
|
2.98 MB | Download |
EEM230-D-M (-MID) - single phase - M-Bus
| Datasheet | PP26-587 | EEM230-D-M (-MID) - single phase - M-Bus |
HONEYWELL branded energy meter
Main features:
- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- M-Bus interface to query the data
- Reactive power available through interface
- Up to 250 meter can be connected to the M-Bus interface
- 7-digit display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
accuracy class 1 according to IEC62053-21
| ENG04 |
|
1.45 MB | Download | ||
| FRA04 |
|
1.46 MB | Download | ||
| GER04 |
|
1.46 MB | Download | ||
| ITA04 |
|
1.46 MB | Download |
EEM230-D-MO (-MID) - single phase - Modbus
| Datasheet | PP26-593 | EEM230-D-MO (-MID) - single phase - Modbus |
HONEYWELL branded energy meter
Main features
- Single-phase energy meter, 230 VAC 50 Hz
- Direct measurement up to 32 A
- Display of active power, voltage and current
- Modbus RTU interface to query the data
- Reactive power and cos Phi available through interface
- Up to 247 meters can be connected to the Modbus interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
accuracy class 1 according to IEC62053-21
| ENG04 |
|
0.79 MB | Download | ||
| FRA04 |
|
0.80 MB | Download | ||
| GER04 |
|
0.80 MB | Download |
EEM400-D-M (-MID) - 3-phase direct - M-Bus
| Datasheet | PP26-588 | EEM400-D-M (-MID) - 3-phase direct - M-Bus |
HONEYWELL branded energy meter
Main Features:
- 3-phase energy meter, 3 × 230/400VAC 50Hz
- Direct measuring up to 65A
- Display of active power, voltage and current for every phase
- Display of active power for all phases
- M-Bus interface to retrieve the data
- Reactive power per phase or total, available via M-Bus interface
- Up to 250 meters can be addressed trough primary addresses
- 7-digit display
- Can be sealed with sealing cap (optional)
- Accuracy class B according to EN50470-3,
accuracy class 1 according to IEC62053-21
| ENG04 |
|
2.86 MB | Download | ||
| FRA04 |
|
2.86 MB | Download | ||
| GER04 |
|
2.86 MB | Download | ||
| ITA04 |
|
2.86 MB | Download |
EEM400-D-MO (-MID) - 3-phase direct - Modbus
| Datasheet | PP26-594 | EEM400-D-MO (-MID) - 3-phase direct - Modbus |
HONEYWELL branded energy meter
Main features
- 3-phase energy meter, 3 × 230/400 VAC 50 Hz
- Direct measurement up to 65 A
- Display of active power, voltage and current for every phase
- Display of active power for all phases
- Modbus RTU Interface to query the data
- Reactive power for every and/or all phases available through interface
- cos Phi for every phases available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display for 1 or 2 tariffs
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
accuracy class 1 according to IEC62053-21
| ENG04 |
|
3.65 MB | Download | ||
| FRA04 |
|
3.66 MB | Download | ||
| GER04 |
|
3.65 MB | Download |
EEM400C-D-M (-MID) - 3-phase indirect - M-Bus
| Datasheet | PP26-589 | EEM400C-D-M (-MID) - 3-phase indirect - M-Bus |
HONEYWELL branded energy meter
Main Features:
- 3-phase energy meter, 3 × 230/400VAC50Hz
- Measurement through a current transformer up to 1500A
- Display of active power, voltage and current for every phase
- Display of active power for all phases
- M-Bus interface to retrieve the data
- Reactive power per phase or total, available via M-Bus interface
- Up to 250 meters can be addressed trough primary addresses
- 7-digit display
- Can be sealed with sealing cap (optional)
- Accuracy class B according to EN50470-3,
accuracy class 1 according to IEC62053-21
| ENG03 |
|
2.95 MB | Download | ||
| FRA03 |
|
2.95 MB | Download | ||
| GER03 |
|
2.95 MB | Download | ||
| ITA03 |
|
2.95 MB | Download |
EEM400C-D-MO (-MID) - 3-phase CT - Modbus
| Datasheet | PP26-595 | EEM400C-D-MO (-MID) - 3-phase CT - Modbus |
HONEYWELL branded energy meter
Main features
- 3-phase energy meter, 3 × 230 / 400 VAC 50 Hz
- Measurement through a current transformer up to 1500 A
- Display of active power, voltage and current for every phase
- Display of active power for all phases
- Modbus RTU Interface to query the data
- Reactive power for every and/or all phases available through interface
- cos Phi for every phases available through interface
- Up to 247 meters can be connected to the Modbus Interface
- 7-digits display
- Lead seal possible with cap as accessory
- Accuracy class B according to EN50470-3,
accuracy class 1 according to IEC62053-21
| ENG04 |
|
1.98 MB | Download | ||
| FRA04 |
|
1.98 MB | Download | ||
| GER04 |
|
2.04 MB | Download |
EEM-CONVERT
| Datasheet | PP31-002 | EEM-CONVERT |
HONEYWELL S0 pulse counter with Modbus interface
Main features
- Up to 99 S0-Modbus Modules on the same bus
- 4 S0 pulse inputs (S01+... S04+) per S0-Modbus Module
- Up to 396 S0 devices on the same Modbus
- The inputs comply with the S0 standard 62053-31
- Integrated RS-485 termination resistor
- LED for bus activity indication
| ENG03 |
|
0.45 MB | Download | ||
| FRA03 |
|
0.43 MB | Download | ||
| GER03 |
|
0.45 MB | Download | ||
| ITA03 |
|
0.43 MB | Download |
KFE 102/103/300/302
| Datasheet | PP31-003 | KFE 102/103/300/302 |
KOL electronic timer
| Datasheet | PP31-005 | KOL electronic timer |
- Multi function or mono function
- 4 (KOL251) or 6 time ranges (KOL 3)
- 17.5 mm width for DIN rail
- 24…48 VDC and 24…240 VAC
- 2 make contacts (KOL251)
- 1 changeover contact (KOL 3)
| DUT05 |
|
0.45 MB | Download | ||
| ENG05 |
|
0.45 MB | Download | ||
| FRA05 |
|
0.45 MB | Download | ||
| GER05 |
|
0.45 MB | Download | ||
| ITA05 |
|
0.45 MB | Download | ||
| SPA05 |
|
0.45 MB | Download |
KOP.F electronic timer
| Datasheet | PP31-009 | KOP.F electronic timer |
Timer electronic
- Multi voltage, multi functional und multi timer, for frontpanel mounting and for socket mounting
- DIN dimensions 48 × 48 mm
- 24…230 VDC/VAC
- 1 changeover contact, 2-pole
| DUT08 |
|
0.43 MB | Download | ||
| ENG08 |
|
0.43 MB | Download | ||
| FRA08 |
|
0.43 MB | Download | ||
| GER08 |
|
0.43 MB | Download | ||
| HUN08 |
|
0.43 MB | Download | ||
| ITA08 |
|
0.43 MB | Download | ||
| POL08 |
|
0.43 MB | Download | ||
| SPA08 |
|
0.43 MB | Download |
KOP.K electronic timer
| Datasheet | PP31-007 | KOP.K electronic timer |
Timer, electronic
- Multifunction or mono function
- To 10 time ranges
- 22.5 mm width for DIN rail
- 24…48 VDC and 24…240 VAC, 50/60 Hz
- 24…240 VAC/DC
- 1 or 2 changeover contacts, instantaneous and/or timed contacts
| DUT07 |
|
0.78 MB | Download | ||
| ENG07 |
|
0.78 MB | Download | ||
| FRA07 |
|
0.78 MB | Download | ||
| GER07 |
|
0.78 MB | Download | ||
| HUN07 |
|
0.78 MB | Download | ||
| ITA07 |
|
0.78 MB | Download | ||
| POL07 |
|
0.78 MB | Download | ||
| SPA07 |
|
0.79 MB | Download |
KOP.J electronic timer
| Datasheet | PP31-006 | KOP.J electronic timer |
KFT 100/200 thermistor control relays
| Datasheet | PP31-004 | KFT 100/200 thermistor control relays |
LFHxx - Duct humidity temperature sensors
| Datasheet | 0754GE51 | LFHxx - Duct humidity temperature sensors |
M400 Series - Thermoelectric Linear Actuators
| Datasheet | 52-005 | M400 Series - Thermoelectric Linear Actuators |
Honeywell M400 Series Thermoelectric Linear Actuator is specially designed for short and linear stroke on/off valves, like actuated zone valve and on/off pressure independent control valve and more. With a slower running speed, the thermoelectric actuator can help to avoid water hammer effectively.
| ENG02 |
|
1.83 MB | Download | ||
| GER02 |
|
1.83 MB | Download |
PCD1.A1000-A20 E-Line S-Series RIO 10DO
| Datasheet | PP31-146 | PCD1.A1000-A20 E-Line S-Series RIO 10DO |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG11 |
|
1.70 MB | Download | ||
| FRA11 |
|
1.73 MB | Download | ||
| GER11 |
|
1.72 MB | Download | ||
| ITA11 |
|
1.71 MB | Download |
PCD1.A2000-A20 E-Line S-Series RIO 6Rel
| Datasheet | PP31-147 | PCD1.A2000-A20 E-Line S-Series RIO 6Rel |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG13 |
|
1.89 MB | Download | ||
| FRA13 |
|
1.92 MB | Download | ||
| GER13 |
|
1.92 MB | Download | ||
| ITA13 |
|
1.90 MB | Download |
PCD1.B1000-A20 L-Series RIO 4DI, 10Rel
| Datasheet | 31-143 | PCD1.B1000-A20 L-Series RIO 4DI, 10Rel |
The E-Line RIO modules are controlled via RS-485 and enable decentralised automation using industrial quality components. The data point mix is specifically designed for applications in the HVAC sector.
| ENG10 |
|
1.95 MB | Download | ||
| FRA10 |
|
1.98 MB | Download | ||
| GER10 |
|
1.98 MB | Download | ||
| ITA10 |
|
1.97 MB | Download |
PCD1.B1010-A20 L-Series RIO 24DI, 10Rel
| Datasheet | 31-144 | PCD1.B1010-A20 L-Series RIO 24DI, 10Rel |
The E-Line RIO modules are controlled via RS-485 and enable decentralised automation using industrial quality components. The data point mix is specifically designed for applications in the HVAC sector.
| ENG13 |
|
1.80 MB | Download | ||
| FRA13 |
|
1.83 MB | Download | ||
| GER13 |
|
1.83 MB | Download | ||
| ITA13 |
|
1.81 MB | Download |
PCD1.B1020-A20 L-Series RIO 16DI, 4Rel
| Datasheet | 31-145 | PCD1.B1020-A20 L-Series RIO 16DI, 4Rel |
The E-Line RIO modules are controlled via RS-485 and enable decentralised automation using industrial quality components. The data point mix is specifically designed for applications in the HVAC sector.
| ENG09 |
|
1.76 MB | Download | ||
| FRA09 |
|
1.78 MB | Download | ||
| GER09 |
|
1.78 MB | Download | ||
| ITA09 |
|
1.77 MB | Download |
PCD1.B1100-A20 E-Line S-Series RIO 4DI, 10Rel
| Datasheet | PP31-155 | PCD1.B1100-A20 E-Line S-Series RIO 4DI, 10Rel |
E-Line S-Serie Digital input/output module
- manual override operating level for all outputs
- status LED for inputs and outputs
- supply 24 VDC
- 4 digital inputs; 24 VDC (source operation)
- 10 relay (6 normally open/ 4 changeover) 250 VAC / 30 VDC, 5 A (DC1)
- 1 interface RS-485 (S-Bus and Modbus)
- 1 USB Service interface
- Bridge connectors for power supply and communication to connect to next RIO module
| ENG03 |
|
1.94 MB | Download | ||
| FRA03 |
|
1.96 MB | Download | ||
| GER03 |
|
1.96 MB | Download | ||
| ITA03 |
|
1.95 MB | Download |
PCD1.B1120-A20 E-Line S-Series RIO 16DI, 4Rel
| Datasheet | PP31-156 | PCD1.B1120-A20 E-Line S-Series RIO 16DI, 4Rel |
E-Line S-Serie Digital input/output module
- manual override operating level for all outputs
- status LED for inputs and outputs
- supply 24 VDC
- 16 digital inputs; 24 VDC (source operation)
- 4 relay changeover 250 VAC / 30 VDC, 5 A (DC1)
- 1 interface RS-485 (S-Bus and Modbus)
- 1 USB Service interface
- Bridge connectors for power supply and communication to connect to next RIO module
| ENG03 |
|
2.78 MB | Download | ||
| FRA03 |
|
2.00 MB | Download | ||
| GER03 |
|
2.00 MB | Download | ||
| ITA03 |
|
1.99 MB | Download |
PCD1.B5000-A20 E-Line S-Serie RIO 6DI 230V, 3Rel
| Datasheet | PP31-148 | PCD1.B5000-A20 E-Line S-Serie RIO 6DI 230V, 3Rel |
The E-Line S-Serie RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG12 |
|
2.26 MB | Download | ||
| FRA12 |
|
2.28 MB | Download | ||
| GER12 |
|
2.28 MB | Download | ||
| ITA12 |
|
2.26 MB | Download |
PCD1.B5010-A20 E-Line S-Serie RIO 6DI 24V, 3Rel
| Datasheet | PP31-153 | PCD1.B5010-A20 E-Line S-Serie RIO 6DI 24V, 3Rel |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG04 |
|
1.93 MB | Download | ||
| FRA04 |
|
1.95 MB | Download | ||
| GER04 |
|
1.95 MB | Download | ||
| ITA04 |
|
1.93 MB | Download |
PCD1.E1000-A10 E-Lines S-Serie RIO 12DI
| Datasheet | PP31-149 | PCD1.E1000-A10 E-Lines S-Serie RIO 12DI |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG08 |
|
1.25 MB | Download | ||
| FRA08 |
|
1.28 MB | Download | ||
| GER08 |
|
1.27 MB | Download | ||
| ITA08 |
|
1.26 MB | Download |
PCD1.F2611-C15 E-Line DALI module and RS-485
| Datasheet | PP31-112 | PCD1.F2611-C15 E-Line DALI module and RS-485 |
E-Line DALI module and auxillary RS-485.
The freely programmable module with a housing width of 35 mm (2 HP) can be controlled via RS-485 and enable the direct control of 64 DALI subscribers.
| ENG04 |
|
1.33 MB | Download | ||
| FRA04 |
|
1.33 MB | Download | ||
| GER04 |
|
1.34 MB | Download | ||
| ITA04 |
|
1.33 MB | Download |
PCD1.G1100-C15 E-Line Licht & Beschattungsmodul
| Datasheet | 31-111 | PCD1.G1100-C15 E-Line Licht & Beschattungsmodul |
PCD1.G2000-A20 E-Line S-Series RIO 6UI, 2AO, 2TR
| Datasheet | 31-150 | PCD1.G2000-A20 E-Line S-Series RIO 6UI, 2AO, 2TR |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG13 |
|
1.77 MB | Download | ||
| FRA13 |
|
1.80 MB | Download | ||
| GER13 |
|
1.78 MB | Download | ||
| ITA13 |
|
1.78 MB | Download |
PCD1.G2100-A10 E-Line S-Sries RIO 8UI
| Datasheet | PP31-154 | PCD1.G2100-A10 E-Line S-Sries RIO 8UI |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG03 |
|
1.87 MB | Download | ||
| FRA03 |
|
1.90 MB | Download | ||
| GER03 |
|
1.89 MB | Download | ||
| ITA03 |
|
1.88 MB | Download |
PCD1.G2200-A20 E-Line S-Series RIO 8UI, 4AO
| Datasheet | PP31-151 | PCD1.G2200-A20 E-Line S-Series RIO 8UI, 4AO |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG11 |
|
1.58 MB | Download | ||
| FRA11 |
|
1.61 MB | Download | ||
| GER11 |
|
1.60 MB | Download | ||
| ITA11 |
|
1.59 MB | Download |
PCD1.G360x-C15 E-Line room control module
| Datasheet | PP31-110 | PCD1.G360x-C15 E-Line room control module |
PCD1.G5000-A20 L-Series RIO 16DI, 8Rel, 8AI, 4AO
| Datasheet | 31-140 | PCD1.G5000-A20 L-Series RIO 16DI, 8Rel, 8AI, 4AO |
The E-Line RIO modules are controlled via RS-485 and enable decentralised automation using industrial quality components. The data point mix is specifically designed for applications in the HVAC sector.
| ENG13 |
|
2.85 MB | Download | ||
| FRA13 |
|
2.87 MB | Download | ||
| GER13 |
|
2.88 MB | Download | ||
| ITA13 |
|
2.86 MB | Download |
PCD1.G5010-A20 L-Series RIO 12DI, 4Rel, 12AI, 8AO
| Datasheet | 31-141 | PCD1.G5010-A20 L-Series RIO 12DI, 4Rel, 12AI, 8AO |
The E-Line RIO modules are controlled via RS-485 and enable decentralised automation using industrial quality components. The data point mix is specifically designed for applications in the HVAC sector.
| ENG11 |
|
2.03 MB | Download | ||
| FRA11 |
|
2.06 MB | Download | ||
| GER11 |
|
2.06 MB | Download | ||
| ITA11 |
|
2.04 MB | Download |
PCD1.G5020-A20 L-Series RIO 8DI, 4Rel, 16AI, 4AO
| Datasheet | 31-142 | PCD1.G5020-A20 L-Series RIO 8DI, 4Rel, 16AI, 4AO |
The E-Line RIO modules are controlled via RS-485 and enable decentralised automation using industrial quality components. The data point mix is specifically designed for applications in the HVAC sector.
| ENG12 |
|
1.87 MB | Download | ||
| FRA12 |
|
1.88 MB | Download | ||
| GER12 |
|
1.90 MB | Download | ||
| ITA12 |
|
1.87 MB | Download |
PCD1.M0160E0 - E-Controller
| Flyer | PP26-564 | PCD1.M0160E0 - E-Controller |
PCD1.M2220-C15: E-Line CPU with Ethernet, 512 kB
| Datasheet | 31-100 | PCD1.M2220-C15: E-Line CPU with Ethernet, 512 kB |
Features
- 4 digital inputs
- 2 analogue inputs, individually configurable via software
- 1 Watchdog relay/changeover contact
- Electrical isolation between supply, bus and I/Os
- Pluggable terminal blocks protected by flaps
- Status LEDs on the front
- Ethernet switch, 2× RS-485, USB and NFC interface
- Large onboard memory for data (up to 128 MByte file system)
- Automation server for integration in web+IT systems
- Freely programmable with Saia PG5®
| ENG06 |
|
1.22 MB | Download | ||
| FRA06 |
|
1.22 MB | Download | ||
| GER06 |
|
1.22 MB | Download | ||
| ITA06 |
|
1.22 MB | Download | ||
| SPA06 |
|
Download |
PCD1.P1001-J30 Power Quality Analyzer
| Datasheet | PP31-200 | PCD1.P1001-J30 Power Quality Analyzer |
PCD1.W5200-A20 E-Line S-Series RIO 8AO
| Datasheet | PP31-152 | PCD1.W5200-A20 E-Line S-Series RIO 8AO |
The E-Line S-Series RIO modules are controlled via RS-485 from a S-Bus or Modbus master and enable decentralised automation using industrial quality components.
The data point mix is specifically designed for applications in the HVAC sector.
| ENG07 |
|
1.45 MB | Download | ||
| FRA07 |
|
1.48 MB | Download | ||
| GER07 |
|
1.47 MB | Download | ||
| ITA07 |
|
1.46 MB | Download |
PCD1.W5300-C15 E-Line analogue module
| Datasheet | PP31-113 | PCD1.W5300-C15 E-Line analogue module |
The module has a housing width of 35 mm (2 HP) that is compatible with electrical control cabinets, is controlled via RS-485 and enables the recording of analogue measurement signals and the control of actuators with analogue control variables.
| ENG03 |
|
1.11 MB | Download | ||
| FRA03 |
|
1.13 MB | Download | ||
| GER03 |
|
0.97 MB | Download | ||
| ITA03 |
|
1.11 MB | Download |
PCD2.A200 - Output module, 4 relays, 250 VAC/2 A
| Datasheet | PP31-500 | PCD2.A200 - Output module, 4 relays, 250 VAC/2 A |
PCD2.A210 - Output module, 4 relays, 250 VAC/2 A
| Datasheet | PP31-501 | PCD2.A210 - Output module, 4 relays, 250 VAC/2 A |
PCD2.A220 - Output module, 2×3 relays, 250 VAC/2 A
| Datasheet | PP31-502 | PCD2.A220 - Output module, 2×3 relays, 250 VAC/2 A |
PCD2.A250 - Output module, 2×4 relays, 48 VAC/2 A
| Datasheet | PP31-503 | PCD2.A250 - Output module, 2×4 relays, 48 VAC/2 A |
PCD2.A300 - Output module, 6 transistors, 2A
| Datasheet | PP31-504 | PCD2.A300 - Output module, 6 transistors, 2A |
PCD2.A400 - Output module, 8 transistors
| Datasheet | PP31-505 | PCD2.A400 - Output module, 8 transistors |
PCD2.A410 - Output module, 8 transistors
| Datasheet | PP31-506 | PCD2.A410 - Output module, 8 transistors |
PCD2.A460 - Output mod., 16 tr. with ribbon connector
| Datasheet | PP31-507 | PCD2.A460 - Output mod., 16 tr. with ribbon connector |
PCD2.A465 - Output module, 16 transistors
| Datasheet | PP31-508 | PCD2.A465 - Output module, 16 transistors |
PCD2.C1000 Extension module holder for 4 I/O mod.
| Datasheet | 31-531 | PCD2.C1000 Extension module holder for 4 I/O mod. |
PCD2.E110 - Input module, 8 × 24 VDC, 8 ms
| Datasheet | PP31-511 | PCD2.E110 - Input module, 8 × 24 VDC, 8 ms |
PCD2.E111 - Input module, 8 × 24 VDC, 0.2 ms
| Datasheet | PP31-512 | PCD2.E111 - Input module, 8 × 24 VDC, 0.2 ms |
PCD2.E112 - Input module, 8 × 12 VDC, 9 ms
| Datasheet | PP31-513 | PCD2.E112 - Input module, 8 × 12 VDC, 9 ms |
PCD2.E116 - Input module, 8 × 5 VDC, 0.2 ms
| Datasheet | PP31-514 | PCD2.E116 - Input module, 8 × 5 VDC, 0.2 ms |
PCD2.E165 - Dig. inp. module, 16 inp., 24 VDC, 8 ms
| Datasheet | 31-520 | PCD2.E165 - Dig. inp. module, 16 inp., 24 VDC, 8 ms |
Digital input module, 16 inputs, 24 VDC, source and sink operation,
8 ms input delay
Low-cost input module for source or sink operation with 16 inputs, electrically connected.
Suitable for most electronic and electromechanical switching elements at 24 VDC.
| ENG0 |
|
0.79 MB | Download | ||
| FRA01 |
|
0.78 MB | Download | ||
| GER01 |
|
0.80 MB | Download | ||
| ITA01 |
|
0.78 MB | Download | ||
| SPA01 |
|
0.78 MB | Download |
PCD2.G200 - Multifunction I/O module
| Datasheet | PP31-001 | PCD2.G200 - Multifunction I/O module |
PCD2/3.H112/H114
| Datasheet | PP26-507 | PCD2/3.H112/H114 |
PCD2.H222 and PCD3.H222 - Module for stepper motors
| Datasheet | PP26-513 | PCD2.H222 and PCD3.H222 - Module for stepper motors |
PCD2.K221 - System Cable 34 pin, 1.5 m
| Datasheet | PP31-552 | PCD2.K221 - System Cable 34 pin, 1.5 m |
PCD2.K223 - System Cable 34 pin, 3.0 m
| Datasheet | PP31-553 | PCD2.K223 - System Cable 34 pin, 3.0 m |
PCD2.K231 - System Cable 34 pin, 1.0 m
| Datasheet | PP31-554 | PCD2.K231 - System Cable 34 pin, 1.0 m |
PCD2.K232 - System Cable 34 pin, 2.0 m
| Datasheet | PP31-555 | PCD2.K232 - System Cable 34 pin, 2.0 m |
PCD2.K241 - System Cable 34 pin, 1.0 m
| Datasheet | PP31-556 | PCD2.K241 - System Cable 34 pin, 1.0 m |
Plug-in system cable for 2 terminal adapters PCD2.K51x or relay interface PCD2.K55x.
Sheathed, half-round cable, length 1.0 m;
PCD side: 34-pole ribbon cable connector (type D)
Process side: two 16-pole ribbon cable connectors
| ENG01 |
|
0.41 MB | Download | ||
| FRA01 |
|
0.41 MB | Download | ||
| GER01 |
|
0.41 MB | Download | ||
| ITA01 |
|
0.41 MB | Download |
PCD2.K242 - System Cable 34 pin, 2.0 m
| Datasheet | PP31-557 | PCD2.K242 - System Cable 34 pin, 2.0 m |
Plug-in system cable for 2 terminal adapters PCD2.K51x or relay interface PCD2.K55x.
Sheathed, half-round cable, length 2.0 m;
PCD side: 34-pole ribbon cable connector (type D)
Process side: two 16-pole ribbon cable connectors
| ENG01 |
|
0.42 MB | Download | ||
| FRA01 |
|
0.42 MB | Download | ||
| GER01 |
|
0.42 MB | Download | ||
| ITA01 |
|
0.42 MB | Download |
PCD2.K281 and PCD2.K283 - System Cables
| Tutorial | 26-034 | PCD2.K281 and PCD2.K283 - System Cables |
PCD2.K510 - System adapter for 8 I/O
| Datasheet | PP31-564 | PCD2.K510 - System adapter for 8 I/O |
PCD2.K511 - System adaptor for 8 I/O with LEDs
| Datasheet | PP31-565 | PCD2.K511 - System adaptor for 8 I/O with LEDs |
PCD2.K520 - System adapter for 16 I/O
| Datasheet | PP31-566 | PCD2.K520 - System adapter for 16 I/O |
PCD2.K521 - System adapter for 16 I/O with LEDs
| Datasheet | PP31-567 | PCD2.K521 - System adapter for 16 I/O with LEDs |
PCD2.K551 - Relay interface module for 8 transistor outputs, with LEDs
| Datasheet | PP31-569 | PCD2.K551 - Relay interface module for 8 transistor outputs, with LEDs |
Relay interface to PCD2/3.A460 with 8 plug-in relays. The logical state of the relay is displayed with a LED:
Relay switched on LED on
Relay switched off LED off
PCD end: 16-pole ribbon connector I/O (or 12 screw terminals J1)
Process end: 24 screw terminals 0.5…1.5 mm2
Switching capacity of the changeover contacts: 10 A / 250 VAC or 10 A / 24 VDC (ohmic)
| ENG01 |
|
0.50 MB | Download | ||
| FRA01 |
|
0.51 MB | Download | ||
| GER01 |
|
0.51 MB | Download | ||
| ITA01 |
|
0.50 MB | Download |
PCD2.W200 - Analogue inputs, 0…10 V, 10 bit
| Datasheet | 31-527 | PCD2.W200 - Analogue inputs, 0…10 V, 10 bit |
Analogue input module, 8 inputs (channels), resolution 10 bit, signal range 0 … 10 V, (the channels themselves not separated), plug-in type L (4 405 4847 0) included
| ENG02 |
|
0.90 MB | Download | ||
| FRA02 |
|
0.90 MB | Download | ||
| GER02 |
|
0.90 MB | Download | ||
| ITA02 |
|
0.90 MB | Download | ||
| SPA02 |
|
0.90 MB | Download |
PCD2.W220 - Analogue inputs, Pt/Ni1000, 10 bit
| Datasheet | 31-529 | PCD2.W220 - Analogue inputs, Pt/Ni1000, 10 bit |
Analogue input module, 8 inputs (channels), resolution 10 bit, signal range Pt / Ni1000, (the channels themselves not separated), connection with pluggable spring terminals, plug-in type L (4 405 4847 0) included
| ENG01 |
|
0.90 MB | Download | ||
| FRA01 |
|
0.90 MB | Download | ||
| GER01 |
|
0.90 MB | Download | ||
| ITA01 |
|
0.90 MB | Download | ||
| SPA01 |
|
0.90 MB | Download |
PCD2.W340 - Analogue inp., 8 channels, 12 bits
| Datasheet | 31-537 | PCD2.W340 - Analogue inp., 8 channels, 12 bits |
PCD2/3.W380
| Datasheet | PP26-598 | PCD2/3.W380 |
PCD2.W400 - Analogue outputs, 4 channels, 8 bits
| Datasheet | 31-541 | PCD2.W400 - Analogue outputs, 4 channels, 8 bits |
PCD2/3.W525 analogue combined I/O module
| Datasheet | PP26-475 | PCD2/3.W525 analogue combined I/O module |
PCD2.W720 and PCD3.W720 Dynamic weighing module
| Datasheet | PP26-385 | PCD2.W720 and PCD3.W720 Dynamic weighing module |
PCD2/3.W745 Temperature measuring module
| Datasheet | PP26-386 | PCD2/3.W745 Temperature measuring module |
PCD3.A200 - Output module, 4 relays, 250 VAC/2 A
| Datasheet | 31-600 | PCD3.A200 - Output module, 4 relays, 250 VAC/2 A |
PCD3.A210 - Output module, 4 relays, 250 VAC/2 A
| Datasheet | 31-601 | PCD3.A210 - Output module, 4 relays, 250 VAC/2 A |
PCD3.A220 - Output module, 2×3 relays, 250 VAC/2 A
| Datasheet | 31-602 | PCD3.A220 - Output module, 2×3 relays, 250 VAC/2 A |
PCD3.A251 - Digital output module, 8 relays
| Datasheet | 31-603 | PCD3.A251 - Digital output module, 8 relays |
PCD3.A300 - Digital output module, 6 transistor, 2Amp.
| Datasheet | 31-604 | PCD3.A300 - Digital output module, 6 transistor, 2Amp. |
PCD3.A400 - Outp. mod., 8 Transistor, 0.5 A
| Datasheet | 31-605 | PCD3.A400 - Outp. mod., 8 Transistor, 0.5 A |
PCD3.A410 - Outp. mod., 8 Transistor, 0.5 A, galv.
| Datasheet | 31-606 | PCD3.A410 - Outp. mod., 8 Transistor, 0.5 A, galv. |
PCD3.A460 - Digital output module, 16 trans, 0.5 A
| Datasheet | 31-607 | PCD3.A460 - Digital output module, 16 trans, 0.5 A |
PCD3.A465 - Digital output module, 16 transistors
| Datasheet | 31-608 | PCD3.A465 - Digital output module, 16 transistors |
PCD3.A810 - Local control module with 4 relays
| Datasheet | 31-609 | PCD3.A810 - Local control module with 4 relays |
PCD3.A860 - Light and shade control module
| Datasheet | 31-610 | PCD3.A860 - Light and shade control module |
PCD3.B160 - Combined digital input/output modules
| Datasheet | 31-612 | PCD3.B160 - Combined digital input/output modules |
Digital input/output module with 16 I/O, configurable either as inputs or as outputs in groups of four (4)
Inputs : 24 VDC, source operation, delay 0.2/8 ms
Outputs : breaking capacity 5…30 VDC/0.5 A (2 connectors type K included)
| ENG03 |
|
1.55 MB | Download | ||
| FRA03 |
|
1.55 MB | Download | ||
| GER03 |
|
1.56 MB | Download | ||
| ITA03 |
|
1.57 MB | Download | ||
| SPA03 |
|
1.56 MB | Download |
PCD3.C100 Extension module holder for 4 I/O modules
| Datasheet | 31-680 | PCD3.C100 Extension module holder for 4 I/O modules |
PCD3.C200 Extension module holder for 4 I/O modules
| Datasheet | 31-682 | PCD3.C200 Extension module holder for 4 I/O modules |
PCD3.E110 - Dig. inp. module, 8 inp., 24 VDC, 8 ms
| Datasheet | 31-614 | PCD3.E110 - Dig. inp. module, 8 inp., 24 VDC, 8 ms |
PCD3.E111 - Dig. inp. module, 8 inp., 24 VDC, 0.2 ms
| Datasheet | 31-615 | PCD3.E111 - Dig. inp. module, 8 inp., 24 VDC, 0.2 ms |
PCD3.E112 - Dig. inp. module, 8 inputs, 12 VDC, 9 ms
| Datasheet | 31-616 | PCD3.E112 - Dig. inp. module, 8 inputs, 12 VDC, 9 ms |
PCD3.E116 - Dig. inp. module, 8 inputs, 5 VDC, 0.2 ms
| Datasheet | 31-617 | PCD3.E116 - Dig. inp. module, 8 inputs, 5 VDC, 0.2 ms |
PCD3.E160 - 16 digital inp, 8 ms, ribbon cable conn
| Datasheet | 31-618 | PCD3.E160 - 16 digital inp, 8 ms, ribbon cable conn |
PCD3.E161 - 16 digital inp, 0.2 ms, ribbon cable conn
| Datasheet | 31-619 | PCD3.E161 - 16 digital inp, 0.2 ms, ribbon cable conn |
PCD3.E165 - Dig. inp. module, 16 inp., 24 VDC, 8 ms
| Datasheet | 31-620 | PCD3.E165 - Dig. inp. module, 16 inp., 24 VDC, 8 ms |
Digital input module, 16 inputs, 24 VDC, source and sink operation,
8 ms input delay, (connector type C included)
Low-cost input module for source or sink operation with 16 inputs, electrically connected.
Suitable for most electronic and electromechanical switching elements at 24 VDC.
| ENG03 |
|
0.73 MB | Download | ||
| FRA03 |
|
0.75 MB | Download | ||
| GER03 |
|
0.76 MB | Download | ||
| ITA03 |
|
0.75 MB | Download | ||
| SPA03 |
|
0.75 MB | Download |
PCD3.E166 - Dig. inp. module, 16 inp., 24 VDC, 0.2 ms
| Datasheet | 31-621 | PCD3.E166 - Dig. inp. module, 16 inp., 24 VDC, 0.2 ms |
PCD3.E500 - Digital input module, 6 inputs, 230 VAC
| Datasheet | 31-622 | PCD3.E500 - Digital input module, 6 inputs, 230 VAC |
PCD3.E610 - 8 dig. inp. galv. isol. 24V/10ms
| Datasheet | 31-623 | PCD3.E610 - 8 dig. inp. galv. isol. 24V/10ms |
PCD3.E613 - 8 dig. inp. galv. isol. 48V/9ms
| Datasheet | 31-625 | PCD3.E613 - 8 dig. inp. galv. isol. 48V/9ms |
PCD3.F150 - Serial interf. RS-485 with galv. isolation
| Datasheet | 31-653 | PCD3.F150 - Serial interf. RS-485 with galv. isolation |
PCD3.F210 - Serial interf. RS-485/422 + 1 socket
| Datasheet | PP31-655 | PCD3.F210 - Serial interf. RS-485/422 + 1 socket |
PCD3.F281 - Belimo MP-Bus module
| Datasheet | PP31-657 | PCD3.F281 - Belimo MP-Bus module |
PCD3.K010 - Connection plug for module holders
| Datasheet | 31-690 | PCD3.K010 - Connection plug for module holders |
PCD3.K106 - Extension cable 0.7 m for module holders
| Datasheet | 31-691 | PCD3.K106 - Extension cable 0.7 m for module holders |
PCD3.K116 - Extension cable 1.2 m for module holders
| Datasheet | 31-692 | PCD3.K116 - Extension cable 1.2 m for module holders |
PCD3.K225 interf. cable PCD3.T760 web server to PC
| Datasheet | PP31-693 | PCD3.K225 interf. cable PCD3.T760 web server to PC |
PCD3.K281 and PCD2.K283 - System Cables
| Tutorial | 26-037 | PCD3.K281 and PCD2.K283 - System Cables |
PCD3.M2130V6 PCD3-Compact
| Datasheet | PP26-473 | PCD3.M2130V6 PCD3-Compact |
PCD3.M3120 - CPU basic module up to 64 I/O
| Datasheet | PP26-447 | PCD3.M3120 - CPU basic module up to 64 I/O |
PLC with 128 KBytes of user memory
Backup with internal Flash memory, USB port for PG5
max. 64 digital I/Os (not expandable), 2 interrupts, Web-Server,
RS-485 for Profi-S-Net or S-Bus, Ethernet TCP/IP
| ENG08 |
|
0.38 MB | Download | ||
| FRA08 |
|
0.39 MB | Download | ||
| GER08 |
|
0.39 MB | Download | ||
| ITA08 |
|
0.39 MB | Download |
PCD3.M3160 - CPU basic power module up to 64 I/O
| Datasheet | PP31-666 | PCD3.M3160 - CPU basic power module up to 64 I/O |
PLC with 512 KBytes of user memory, Backup with internal Flash memory, USB port for PG5
max. 64 digital I/Os (not expandable), 2 interrupts, Web-Server,
RS-485 for Profi-S-Net or S-Bus, Ethernet TCP/IP
| ENG03 |
|
0.36 MB | Download | ||
| FRA03 |
|
0.37 MB | Download | ||
| GER03 |
|
0.37 MB | Download | ||
| ITA03 |
|
0.38 MB | Download |
PCD3.M3330 - CPU basic module up to 1023 I/O
| Datasheet | PP31-660 | PCD3.M3330 - CPU basic module up to 1023 I/O |
PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system,
CPU with 512 KByte user program, backup with on-board Flash memory, USB port for PG5,
up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
| ENG02 |
|
0.37 MB | Download | ||
| FRA02 |
|
0.37 MB | Download | ||
| GER02 |
|
0.37 MB | Download | ||
| ITA02 |
|
0.39 MB | Download |
PCD3.M3360 - CPU basic power module up to 1023 I/O
| Datasheet | PP31-661 | PCD3.M3360 - CPU basic power module up to 1023 I/O |
PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system,
CPU with 512 KByte user program, USB port for PG5, up to 1024 I/O, 2 interrupt inputs,
RS-485 for Profi-S-Net or S-Bus
| ENG02 |
|
0.37 MB | Download | ||
| FRA02 |
|
0.37 MB | Download | ||
| GER02 |
|
0.37 MB | Download | ||
| ITA02 |
|
0.38 MB | Download |
PCD3.M5340 - RS-422, Ethernet, up to 1023 I/O
| Datasheet | PP26-474 | PCD3.M5340 - RS-422, Ethernet, up to 1023 I/O |
PCD3.M5360 - RS422, Ethernet, up to 1023 I/O
| Datasheet | PP31-667 | PCD3.M5360 - RS422, Ethernet, up to 1023 I/O |
PCD3.M5540 - CPU standard up to 1023 I/O
| Datasheet | PP31-662 | PCD3.M5540 - CPU standard up to 1023 I/O |
PCD3 processor unit with Ethernet TCP/IP,
web and FTP server, file system, CPU with 1 MByte user program,
backup option with PCD7.R5xx/R610 Flash card, USB port for PG5,
up to 1024 I/O, 2 interrupt inputs, RS-232, 2× RS-485 for Profi-S-Net/MPI/S-Bus,
data protection 1-3 years
| ENG01 |
|
0.36 MB | Download | ||
| FRA01 |
|
0.37 MB | Download | ||
| GER01 |
|
0.36 MB | Download | ||
| ITA01 |
|
0.37 MB | Download |
PCD3.M5560 - CPU power module with up to 1023 I/O
| Datasheet | PP31-663 | PCD3.M5560 - CPU power module with up to 1023 I/O |
PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system,
CPU with 2 MByte user program, 1 MByte SRam extension memory,
128 MByte user Flash memory with file system, clock (RTC),
data protection 1-3 years, USB port for PG5, up to 1024 I/O,
2 interrupts, RS-232, 2× RS-485 for Profi-S-Net/MPI/S-Bus
| ENG01 |
|
0.36 MB | Download | ||
| FRA01 |
|
0.37 MB | Download | ||
| GER01 |
|
0.37 MB | Download | ||
| ITA01 |
|
0.38 MB | Download |
PCD3.M6240 - CAN, up to 1023 I/O
| Datasheet | PP26-449 | PCD3.M6240 - CAN, up to 1023 I/O |
CPU base units for 4 plug-in I/O modules
PCD3 modular with CAN bus interface 1 MB of user memory with Run/Halt switch Backup option with PCD7.R500 Flash Card, USB port for PG5 max. 1023 digital I/Os, 2 interrupts, Web-Server, RS-232, RS-485 for Profi-S-Net/MPI/S-Bus
| ENG08 |
|
|
0.27 MB | Download | |
| FRA08 |
|
|
0.27 MB | Download | |
| GER08 |
|
|
0.27 MB | Download | |
| ITA08 |
|
|
0.27 MB | Download | |
| CZE |
|
|
0.32 MB | Download |
PCD3.M6340 - CAN, up to 1023 I/O
| Datasheet | PP34-010 | PCD3.M6340 - CAN, up to 1023 I/O |
CPU base units for 4 plug-in I/O modules
PCD3 processor unit with CAN bus interface and Ethernet TCP/IP, web and FTP server, file system, CPU with 1 MByte user program, backup option with PCD7.R500 Flash card, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupts, RS-232, 2x RS-485 for Profi-S-Net/MPI/S-Bus
| ENG01 |
|
|
0.27 MB | Download | |
| FRA01 |
|
|
0.27 MB | Download | |
| GER01 |
|
|
0.27 MB | Download | |
| ITA01 |
|
|
0.27 MB | Download | |
| CZE |
|
|
0.32 MB | Download |
PCD3.M6360 - CAN, up to 1023 I/O
| Datasheet | PP34-011 | PCD3.M6360 - CAN, up to 1023 I/O |
CPU base units for 4 plug-in I/O modules
PCD3 processor unit with CAN bus interface and Ethernet TCP/IP, web and FTP server, file system, CPU with 2 MByte user program, 1 MByte RAM extension memory, 128 MByte user Flash memory with file system, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupts, RS-232, 2x RS-485 for Profi-S-Net/MPI/S-Bus
| ENG01 |
|
|
0.28 MB | Download | |
| FRA01 |
|
|
0.28 MB | Download | |
| GER01 |
|
|
0.28 MB | Download | |
| ITA08 |
|
|
0.28 MB | Download |
PCD3.M6540 - Profibus DP Master, up to 1023 I/O
| Datasheet | PP26-450 | PCD3.M6540 - Profibus DP Master, up to 1023 I/O |
PCD3.M6560 - Profibus DP Master, up to 1023 I/O
| Datasheet | PP31-668 | PCD3.M6560 - Profibus DP Master, up to 1023 I/O |
PCD3.M6860 - High-performance CPU
| Datasheet | PP34-007 | PCD3.M6860 - High-performance CPU |
PCD3 processor unit with 2 Ethernet TCP/IP,
web and FTP server, file system,
CPU with 2 MByte user program,
1 MByte SRam extension memory,
128 MByte user Flash memory with file system,
clock (RTC), data protection 1-3 years,
USB port for PG5, up to 1024 I/O, 2 interrupt inputs,
RS-485 for Profi-S-Net/MPI/S-Bus
| ENG01 |
|
0.37 MB | Download | ||
| FRA01 |
|
0.37 MB | Download | ||
| GER01 |
|
0.37 MB | Download | ||
| ITA01 |
|
0.37 MB | Download |
PCD3.M6880 - High Power Standby Controller
| Datasheet | PP34-008 | PCD3.M6880 - High Power Standby Controller |
PCD3.M6893 - High Power IEC-Controller
| Datasheet | 34-009 | PCD3.M6893 - High Power IEC-Controller |
CPU base unit for 4 plug-in I/O modules
PCD3 controller without battery with 1 GByte RAM and 4 GByte Flash for operating system and user program,
1 Socket for user data micro-SD card, max. 32 GByte,
2 Ethernet, 1 RS-485, 1 socket for PCD7.F1xxS communication modules,
1 USB Device port for programming and service, 1 USB host, 1 CAN port (20a and 20b)
2 interrupt inputs, 1 watch dog relay, extendable up to 1023 I/O.
I/O Extension for:
Slot 4 to 7 PCD3.C200,
Slot > 7 PCD3.C100, PCD3.C200 as usual
Supported PCD3 - I/O Modules:
Supported PCD3 - I/O Modules:
Starting with firmware 3.0.0: PCD3.Ax, PCD3.Ex, PCD3.W2x, PCD3.W3x, PCD3.W6x, PCD3.W745
| ENG08 |
|
6.04 MB | Download | ||
| FRA07 |
|
5.45 MB | Download | ||
| GER07 |
|
5.45 MB | Download | ||
| ITA07 |
|
5.44 MB | Download | ||
| SPA07 |
|
5.43 MB | Download |
PCD3.S100 - Workshop Input/Output simulator unit
| Datasheet | 31-679 | PCD3.S100 - Workshop Input/Output simulator unit |
PCD3.T668 - Standby RIO
| Datasheet | PP34-006 | PCD3.T668 - Standby RIO |
PCD3.W200 - Analogue inputs, 0…10 V, 10 bit
| Datasheet | 31-627 | PCD3.W200 - Analogue inputs, 0…10 V, 10 bit |
Analogue input module, 8 inputs (channels), resolution 10 bit, signal range 0 … 10 V, (the channels themselves not separated), connection with pluggable spring terminals, plug-in type A (4 405 4954 0) included
| ENG05 |
|
1.06 MB | Download | ||
| FRA05 |
|
1.06 MB | Download | ||
| GER05 |
|
1.05 MB | Download | ||
| ITA05 |
|
1.05 MB | Download | ||
| SPA05 |
|
1.05 MB | Download |
PCD3.W210 - Analogue inputs, 0…20 mA, 10 bit
| Datasheet | 31-628 | PCD3.W210 - Analogue inputs, 0…20 mA, 10 bit |
Analogue input module, 8 inputs (channels), resolution 10 bit, signal range 0 … 20 mA (4 … 20 mA via software), the channels themselves not separated, connection with pluggable spring terminals, plug-in type A (4 405 4954 0) included
| ENG03 |
|
1.00 MB | Download | ||
| FRA03 |
|
1.01 MB | Download | ||
| GER03 |
|
1.01 MB | Download | ||
| ITA03 |
|
1.01 MB | Download | ||
| SPA03 |
|
1.05 MB | Download |
PCD3.W220 - Analogue inputs, Pt/Ni1000, 10 bit
| Datasheet | 31-629 | PCD3.W220 - Analogue inputs, Pt/Ni1000, 10 bit |
Analogue input module, 8 inputs (channels), resolution 10 bit, signal range Pt / Ni1000, (the channels themselves not separated), connection with pluggable spring terminals, plug-in type A (4 405 4954 0) included
| ENG04 |
|
1.06 MB | Download | ||
| FRA04 |
|
1.06 MB | Download | ||
| GER04 |
|
1.05 MB | Download | ||
| ITA04 |
|
1.06 MB | Download | ||
| SPA04 |
|
1.06 MB | Download |
PCD3.W300 - Analogue inputs, 0...10 V
| Datasheet | 31-632 | PCD3.W300 - Analogue inputs, 0...10 V |
PCD3.W305 - Analogue inputs, 7 channels, 12 bit
| Datasheet | 31-633 | PCD3.W305 - Analogue inputs, 7 channels, 12 bit |
High-speed analogue input module for general use with galvanic isolation, 7 channels:
- 0…10 V
- 12 bit resolution
Galvanic separation of inputs to Saia PCD®, channels themselves not separated.
| ENG04 |
|
1.14 MB | Download | ||
| FRA04 |
|
1.15 MB | Download | ||
| GER04 |
|
1.14 MB | Download | ||
| ITA04 |
|
1.15 MB | Download | ||
| SPA04 |
|
1.15 MB | Download |
PCD3.W310 - Analogue inputs, 0...20 mA
| Datasheet | 31-636 | PCD3.W310 - Analogue inputs, 0...20 mA |
PCD3.W315 - Analogue inputs, 7 channels, 12 bit
| Datasheet | 31-634 | PCD3.W315 - Analogue inputs, 7 channels, 12 bit |
High-speed analogue input module for general use with galvanic isolation, 7 channels:
- 0…20 mA
- 12 bit resolution
Galvanic separation of inputs to Saia PCD®, channels themselves not separated.
| ENG03 |
|
1.18 MB | Download | ||
| FRA03 |
|
1.18 MB | Download | ||
| GER03 |
|
1.17 MB | Download | ||
| ITA03 |
|
1.18 MB | Download | ||
| SPA03 |
|
1.19 MB | Download |
PCD3.W325 - Analogue inputs, 7 channels, 12 bit
| Datasheet | 31-635 | PCD3.W325 - Analogue inputs, 7 channels, 12 bit |
High-speed analogue input module for general use with galvanic isolation, 7 channels:
- –10 V…+10 V,
- 12 bit resolution
Galvanic separation of inputs to Saia PCD®, channels themselves not separated.
| ENG04 |
|
1.14 MB | Download | ||
| FRA04 |
|
1.15 MB | Download | ||
| GER04 |
|
1.14 MB | Download | ||
| ITA04 |
|
1.15 MB | Download | ||
| SPA04 |
|
1.20 MB | Download |
PCD3.W340 - Analogue inp., 8 channels, 12 bits
| Datasheet | 31-637 | PCD3.W340 - Analogue inp., 8 channels, 12 bits |
PCD3.W350 - Analogue inputs, Pt/Ni 100
| Datasheet | 31-638 | PCD3.W350 - Analogue inputs, Pt/Ni 100 |
Analogue input module, 8 inputs (channels), resolution 12 bit, signal range Pt100 / Ni100, (the channels themselves not separated), connection with pluggable spring terminals, plug-in type A (4 405 4954 0) included
| ENG03 |
|
1.24 MB | Download | ||
| FRA03 |
|
1.25 MB | Download | ||
| GER03 |
|
1.26 MB | Download | ||
| ITA03 |
|
1.25 MB | Download | ||
| SPA03 |
|
1.20 MB | Download |
PCD3.W360 - Analogue inputs, PT1000
| Datasheet | 31-639 | PCD3.W360 - Analogue inputs, PT1000 |
Analogue input module, 8 inputs (channels), resolution 12 bit, signal range Pt1000, (the channels themselves not separated), connection with pluggable spring terminals, plug-in type A (4 405 4954 0)) included
| ENG03 |
|
1.14 MB | Download | ||
| FRA03 |
|
1.15 MB | Download | ||
| GER03 |
|
1.16 MB | Download | ||
| ITA03 |
|
1.15 MB | Download | ||
| SPA03 |
|
1.11 MB | Download |
PCD3.W380 - Universal analogue inputs
| Datasheet | 31-640 | PCD3.W380 - Universal analogue inputs |
Universal analogue input module,
8 channels, 13 bits (12 bits+sign), selectable by software,
0…10 V,
±10 V,
0…20 mA,
±20 mA,
Pt/Ni 1000,
0…2500 Ohm,
0…300 kOhm (for NTC sensors)
(2 connectors type K included)
| ENG04 |
|
1.79 MB | Download | ||
| FRA04 |
|
1.79 MB | Download | ||
| GER04 |
|
1.79 MB | Download | ||
| ITA04 |
|
1.79 MB | Download | ||
| SPA04 |
|
1.79 MB | Download |
PCD3.W400 - Analogue outputs, 4 channels, 8 bits
| Datasheet | 31-641 | PCD3.W400 - Analogue outputs, 4 channels, 8 bits |
PCD3.W410 - Analogue outputs, 4 channels, 8 bits
| Datasheet | 31-642 | PCD3.W410 - Analogue outputs, 4 channels, 8 bits |
PCD3.W525 - Combined analogue I/O, 6 channels
| Datasheet | 31-643 | PCD3.W525 - Combined analogue I/O, 6 channels |
Analogue combined input/output module with galvanic isolation, 6 channels :
4 inputs, 14 bits, 0…10 V, 0(4)…20 mA, Pt 1000, Pt 500 or Ni 1000 (selectable by DIP switch)
2 outputs, 12 bits, 0…10 V or 0(4)…20 mA (selectable by software (FBox, FB)
| ENG01 |
|
0.72 MB | Download | ||
| FRA01 |
|
0.72 MB | Download | ||
| GER01 |
|
0.72 MB | Download | ||
| ITA04 |
|
0.72 MB | Download |
PCD3.W600 - Analogue output modules
| Datasheet | 31-644 | PCD3.W600 - Analogue output modules |
PCD3.W605 - Analogue outputs, 6 channels, 10 bits
| Datasheet | 31-645 | PCD3.W605 - Analogue outputs, 6 channels, 10 bits |
PCD3.W610 - Analogue output modules
| Datasheet | 31-646 | PCD3.W610 - Analogue output modules |
PCD3.W615 - Analogue outputs, 4 channels, 10 bits
| Datasheet | 31-647 | PCD3.W615 - Analogue outputs, 4 channels, 10 bits |
PCD3.W625 - Analogue outputs, 6 channels, 10 bits
| Datasheet | 31-648 | PCD3.W625 - Analogue outputs, 6 channels, 10 bits |
PCD3.W745 - Universal temperature measurement
| Datasheet | 31-672 | PCD3.W745 - Universal temperature measurement |
PCD3.W800 - Analogue output with local override
| Datasheet | 31-649 | PCD3.W800 - Analogue output with local override |
Analogue output module with local override functionality
Analogue local control module with 4 channels, 10 bits
- 3 outputs 0..10 V with local control
- 1 output 0..10 V without local control
(connector type J included)
| ENG02 |
|
0.71 MB | Download | ||
| FRA02 |
|
0.72 MB | Download | ||
| GER02 |
|
0.72 MB | Download | ||
| ITA02 |
|
0.71 MB | Download |
PCD7.D410VT5F - Programmable Web-Panel MB
| Datasheet | 26-561 | PCD7.D410VT5F - Programmable Web-Panel MB |
PCD7.D410VTCF - Web Panel MB 10.4" TFT
| Datasheet | PP26-498 | PCD7.D410VTCF - Web Panel MB 10.4" TFT |
PCD7.D412DT5F - Programmable Web-Panel MB
| Datasheet | 26-559 | PCD7.D412DT5F - Programmable Web-Panel MB |
PCD7.D412DTPF - Web Panel MB 12.1" TFT
| Datasheet | PP26-532 | PCD7.D412DTPF - Web Panel MB 12.1" TFT |
PCD7.D443WTPR / PCD7.D443WT5R
| Datasheet | PP31-025 | PCD7.D443WTPR / PCD7.D443WT5R |
PCD7.D450WTPF - Web Panel MB 5.0" TFT
| Datasheet | PP26-575 | PCD7.D450WTPF - Web Panel MB 5.0" TFT |
PCD7.D457ET7F - SBC S-Energy-Manager 5.7"
| Datasheet | PP26-514 | PCD7.D457ET7F - SBC S-Energy-Manager 5.7" |
PCD7.D457VT5F - Programmable Web-Panel MB
| Datasheet | 26-562 | PCD7.D457VT5F - Programmable Web-Panel MB |
PCD7.D457VTCF - 5.7" TFT
| Datasheet | PP26-492 | PCD7.D457VTCF - 5.7" TFT |
PCD7.D470WTPF - Web Panel MB 7.0" TFT
| Datasheet | 26-597 | PCD7.D470WTPF - Web Panel MB 7.0" TFT |
PCD7.D543RF - 4.3" HTML5 Web Panel, resistive touch
| Datasheet | 34-013 | PCD7.D543RF - 4.3" HTML5 Web Panel, resistive touch |
PCD7.D570CF - 7" HTML5 Web Panel, capacitive touch
| Datasheet | 34-014 | PCD7.D570CF - 7" HTML5 Web Panel, capacitive touch |
PCD7.D570CF1 - 7" HTML5 Web Panel, capacitive touch
| Datasheet | 34-014 | PCD7.D570CF1 - 7" HTML5 Web Panel, capacitive touch |
PCD7.D570RF - 7" HTML5 Web Panel, resistive touch
| Datasheet | 34-015 | PCD7.D570RF - 7" HTML5 Web Panel, resistive touch |
PCD7.D510CF - 10.1" HTML5 Web Panel, cap. touch
| Datasheet | 34-016 | PCD7.D510CF - 10.1" HTML5 Web Panel, cap. touch |
PCD7.D510CF1 - 10.1" HTML5 Web Panel, cap. touch
| Datasheet | 34-016 | PCD7.D510CF1 - 10.1" HTML5 Web Panel, cap. touch |
PCD7.D515CF - 15.6" HTML5 Web Panel, cap. touch
| Datasheet | 34-018 | PCD7.D515CF - 15.6" HTML5 Web Panel, cap. touch |
PCD7.D515CF1 - 15.6" HTML5 Web Panel, cap. touch
| Datasheet | 34-018 | PCD7.D515CF1 - 15.6" HTML5 Web Panel, cap. touch |
PCD7.D521CF - 21.5" HTML5 Web Panel, cap. touch
| Datasheet | 34-019 | PCD7.D521CF - 21.5" HTML5 Web Panel, cap. touch |
PCD7.D521CF1 - 21.5" HTML5 Web Panel, cap. touch
| Datasheet | 34-019 | PCD7.D521CF1 - 21.5" HTML5 Web Panel, cap. touch |
PCD7.D1000 - Wall Unit
| Datasheet | PP31-308 | PCD7.D1000 - Wall Unit |
PCD7.D51x0WTA010 - Web Panel Windows CE
| Datasheet | PP31-019 | PCD7.D51x0WTA010 - Web Panel Windows CE |
PCD7.D61x0WTA010 Web Panel eWin 7
| Datasheet | PP31-020 | PCD7.D61x0WTA010 Web Panel eWin 7 |
PCD7.D6xx0WTx010 eWin7-Panels
| Datasheet | PP31-021 | PCD7.D6xx0WTx010 eWin7-Panels |
PCD7.F110S - Serial Interface Module RS-422/RS-485
| Datasheet | 31-801 | PCD7.F110S - Serial Interface Module RS-422/RS-485 |
PCD7.F150S - Serial Interface Module RS-485
| Datasheet | 31-807 | PCD7.F150S - Serial Interface Module RS-485 |
PCD7.F180S - Belimo MP-Bus interface module,
| Datasheet | PP31-810 | PCD7.F180S - Belimo MP-Bus interface module, |
Characteristics of the MP-Bus protocol
- No special cable or line termination resistors
- Costs saved due to reduced expenditure on cabling and easy handling
- Simple commissioning and maintenance
- Uncomplicated method for integrating and exchanging actuators
- Compatible with BELIMO® actuators using MFT/MFT2 technology
| ENG01 |
|
0.11 MB | Download | ||
| FRA01 |
|
0.11 MB | Download | ||
| GER01 |
|
0.11 MB | Download | ||
| ITA01 |
|
0.11 MB | Download |
PCD7.H104D S0 pulse counter with Modbus interface
| Datasheet | 26-576 | PCD7.H104D S0 pulse counter with Modbus interface |
PCD7.H104S S0 to S-Bus module
| Technical Info | PP26-457 | PCD7.H104S S0 to S-Bus module |
Leaflet PCD7.L130
| Tutorial | 26-007 | Leaflet PCD7.L130 |
PCD7.LRxx BACnet Room Controller
| Datasheet | PP31-400 | PCD7.LRxx BACnet Room Controller |
PCD7.LRxx BACnet Room Controller, Installation & commissioning instructions
| Technical Info | PP31-401 | PCD7.LRxx BACnet Room Controller, Installation & commissioning instructions |
PCD7.LRxx-P5 Room Controller - PG5 programmable
| Datasheet | PP31-405 | PCD7.LRxx-P5 Room Controller - PG5 programmable |
PCD7.LR-TR40 and PCD7.LR-TR42 LCD and non-LCD Wall Modules
| Technical Info | PP31-408 | PCD7.LR-TR40 and PCD7.LR-TR42 LCD and non-LCD Wall Modules |
Part number Description Sensors Communication
- PCD7.LR-TR40 Wall Module, Temp only, Sylk Temperature Sylk
- PCD7.LR-TR40-H Wall Module, Temp and Humidity, Sylk Temp, Humidity Sylk
- PCD7.LR-TR40-CO2 Wall Module, Temp and CO2, Sylk Temp, CO2 Sylk
- PCD7.LR-TR40-H-CO2 Wall Module, Temp, Humdity, CO2, Sylk Temp, Hum, CO2 Sylk
- PCD7.LR-TR42 LCD Wall Module, Temp only, Sylk Temperature Sylk
- PCD7.LR-TR42-H LCD Wall Module, Temp and Humidity, Sylk Temp, Humidity Sylk
- PCD7.LR-TR42-CO2 LCD Wall Module, Temp and CO2, Sylk Temp, CO2 Sylk
- PCD7.LR-TR42-H-CO2 LCD Wall Module, Temp, Humidity, CO2, Sylk Temp, Hum, CO2 Sylk
| ENG01 |
|
0.80 MB | Download | ||
| FRA01 |
|
0.80 MB | Download | ||
| GER01 |
|
0.80 MB | Download | ||
| ITA01 |
|
0.80 MB | Download | ||
| SPA01 |
|
0.80 MB | Download |
PCD7.LR-TR40 and PCD7.LR-TR42 LCD and non-LCD Wall Modules
| Datasheet | PP31-409 | PCD7.LR-TR40 and PCD7.LR-TR42 LCD and non-LCD Wall Modules |
Part number Description Sensors Communication
- PCD7.LR-TR40 Wall Module, Temp only, Sylk Temperature Sylk
- PCD7.LR-TR40-H Wall Module, Temp and Humidity, Sylk Temp, Humidity Sylk
- PCD7.LR-TR40-CO2 Wall Module, Temp and CO2, Sylk Temp, CO2 Sylk
- PCD7.LR-TR40-H-CO2 Wall Module, Temp, Humdity, CO2, Sylk Temp, Hum, CO2 Sylk
- PCD7.LR-TR42 LCD Wall Module, Temp only, Sylk Temperature Sylk
- PCD7.LR-TR42-H LCD Wall Module, Temp and Humidity, Sylk Temp, Humidity Sylk
- PCD7.LR-TR42-CO2 LCD Wall Module, Temp and CO2, Sylk Temp, CO2 Sylk
- PCD7.LR-TR42-H-CO2 LCD Wall Module, Temp, Humidity, CO2, Sylk Temp, Hum, CO2 Sylk
| ENG01 |
|
0.18 MB | Download | ||
| FRA01 |
|
0.19 MB | Download | ||
| GER01 |
|
0.19 MB | Download | ||
| ITA01 |
|
0.19 MB | Download | ||
| SPA01 |
|
0.19 MB | Download |
PCD7.R-MSD1024 - uSD Flash memory card 1 GB
| Datasheet | 31-853 | PCD7.R-MSD1024 - uSD Flash memory card 1 GB |
PCD7.T161 & PCD7.T162 - Terminator-Box
| Datasheet | PP26-538 | PCD7.T161 & PCD7.T162 - Terminator-Box |
PCD7.T4850-RF - E-Line - Radio-Interface-Modem
| Datasheet | PP31-016 | PCD7.T4850-RF - E-Line - Radio-Interface-Modem |
Saia PCD® Supervisor
| Datasheet | 34-001 | Saia PCD® Supervisor |
Saia PCD® Supervisor,
is a building monitoring and management solution built upon the powerful Niagara platform.
It is capable of integrating Saia PCD® controllers, third party devices and internet protocols into a centralised software platform that is designed to manage buildings at an enterprise level.
| ENG07 |
|
1.02 MB | Download | ||
| FRA07 |
|
1.05 MB | Download | ||
| GER07 |
|
1.05 MB | Download | ||
| ITA07 |
|
1.04 MB | Download |
Saia PCD® Supervisor - E-Signature Application
| Datasheet | 41-00009-01 | Saia PCD® Supervisor - E-Signature Application |
Q.NET-5TX - Ethernet-Switch with 5 Ports
| Flyer | PP26-472 | Q.NET-5TX - Ethernet-Switch with 5 Ports |
Q.PS-AD3-2405F - Power Supplies 24 V | 5 A
| Datasheet | PP26-549 | Q.PS-AD3-2405F - Power Supplies 24 V | 5 A |
