The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

PG5 FBox libraries for PG5 2.1

On this page newer F-box libraries are available than those that were installed with PG5 2.1.

The newest F-box libraries are available on the update manager.

Communication FBox Libraries for PG5 2.1.100

M-Bus driver for Saia Energy Meter ALD/ALE/AWD with M-Bus

Software M-Bus driver for Saia Energy Meter ALD/ALE/AWD with M-Bus

Do NOT install this library if you already have the M-Bus library from Engiby installed, update the lib from Engiby instead.

2.7.503 New .exe 0.60 MB Download

Http Library

Flyer Http Library

Flyer Flyer Http Library

1 Archive .pdf 0.07 MB Download
1 Archive .pdf 0.07 MB Download

Starter Guide Http Library

Manual Starter Guide Http Library

1 Archive .pdf 0.40 MB Download
1 Archive .pdf 0.40 MB Download

Getting started example for HTTP Client library

Software Getting started example for HTTP Client library

1 Archive .zip 0.02 MB Download

Good to know

With HEAVAC library before 2.7.530 the winter/summer time change does not work if on the device configurator no time zone was selected and the FW is 1.20.xx or higher. See FAQ 101979.
With DDC Suite versions before 2.6.198 the anti blocking protection was nor working correctly.
The EnOcean FBox library version 2.6.147 contains modifications listed in FAQ 101765.
The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295.
The CAN FBox library version $2.6.102 can also be used for PCD2.M5540.
The PCD7.L79x(N) Room controller library version 2.6.130 is required for the PCD7.L79xN.
The M-Bus driver for Saia Energy Meter ALD/ALE/AWD with M-Bus 2.6.113 now also shows the total active and reactive power, see FAQ 101604.
The EIB/KNX driver FBox library version 2.6.220 contains a correction explained in FAQ 101673.
The FBox library version 2.6.176 for the ALD/ALE/AWD with Serial-S-Bus can be "grouped by function" in the FBox selector window of PG5 2.0.200.
The Energy meter with Serial-S-Bus FBox library version 2.5.171 contains a new SASI FBox explained in FAQ 101469.
The heavac library $2.6.154 contains an improvement described in FAQ 101563.
The Belimo MP Bus library contains a correction explained in FAQ 101194.
The Wide Area Automation library 2.6.151 contains a correction explained in FAQ 101545.
The PCD7.L60x Room controller library 2.6.166 contains a modification explained in FAQ 101514.
The base FBox library 2.6.154 contains correction regarding the H/L FBoxes explained in FAQ 101489.
The PCD7.L60x Room controller library 2.6.165 contains a correction explained in FAQ 101506.
The DDC Suite library 2.6.172 contains a correction described in FAQ 101492.
The heavac library 2.6.151 contains a correction described in FAQ 101491.
The File System FBox library 2.6.151 can write up to 3072 bytes with one execution, see FAQ 101154.
The Energy meter with Serial-S-Bus FBox library version 2.6.156 contains a correction explained in FAQ 101443.
The Energy meter with Serial-S-Bus FBox library version 2.6.155 contains a correction explained in FAQ 101432.
The HDLog to File FBox library version 2.6.150 contains a small correction explained in FAQ 101421.
The PCD7.L60x Room controller library 2.6.151 contains a correction explained in FAQ 101455.
The PCD7.L60x Room controller library 2.6.100 supports the PCD7.L60x firmware version SV 1.12, see description.
The Modem FBox library version 2.6.102/2.6.150 contains a small correction explained in FAQ 101315.

PG5 2.0 / E-Mail

  • How I can send an email with variable attachment? (FAQ #101966)
  • Send SMS via Email (FAQ #101873)
  • What does "Error -29" in the FBox "EMail Init" mean? (FAQ #101590)
  • Some e-mail addresses are not interpreted correctly (FAQ #101162)
  • What Ethernet Ports are used by PCDs? (FAQ #101079)
  • What criterias are to be fulfilled for sending e-Mails from the PCD? (FAQ #101054)
  • What do I have to do to be able to send E-Mails to the bluewin.ch SMTP Server ? (FAQ #101020)
  • How to connect a PCD behind an (A)DSL router? (FAQ #101007)
  • Are E-Mails sent by a PCD limited in size? (FAQ #100995)
  • Error list of the "Advanced Text Mail Initialisation" FBox (FAQ #100964)
  • CPU goes in HALT with "CSF INV PAR" right after download (FAQ #100950)

Local FAQ Deutschland / DDC Suite

  • How long is the antiblock protection for pumps and valves switched on? (FAQ #101751)
  • Why does the FBox "System hot water 2.0" not switch off after the temperature limit during disinfection has been reached? (FAQ #101492)
  • Why does the Y-output of a DDC Suite controller change if the setpoint is changed? (FAQ #101424)
  • Why does the DDC Suite FBox "Motor 2-speed" not swich to speed 2 if BACnet is used? (FAQ #101420)
  • How does the DDC Suite treat the watchdog? (FAQ #101383)
  • Practical settings for the alarming macro in use with DDC Suite (FAQ #101342)
  • Can I adapt the BACnet objects suggested by the DDC Suite FBox? (FAQ #101255)
  • Why are the outputs not working in my DDC Suite project (with BACnet enabled)? (FAQ #101254)
  • Where do I have to install FBoxes to make them available in a DDC Suite project? (FAQ #101115)
  • Why do Fupla symbols disappear (e.g. from a DDC Suite FBox )? (FAQ #101095)
  • How to use the HVC (heavac or HLK) reset option? (FAQ #100244)

PG5 2.0 / E-Mail library

  • Is it possible to send an email with the name of the SMTP server and not with the IP-Address of the SMTP server? (FAQ #101850)
  • What does "Error -29" in the FBox "EMail Init" mean? (FAQ #101590)
  • Are E-Mails sent by a PCD limited in size? (FAQ #100995)
  • How to send HTML-formated E-Mails (FAQ #100994)

Communication / EIB library

  • Why can't I build a Fupla containing the "EIB driver FT1.2" project with PG5 2.0.200? (FAQ #101673)
  • Can I use registers above 8191 when working with the EIB FBox library? (FAQ #101283)

PG5 2.0 / File System library

  • Why after an update of the FBox ‘LogtoFile’ to the version 2.7.320 the stored information in the *.csv file have some time gaps? (FAQ #101954)
  • Why can't the PCD write to a file on the file system after the file has been written over FTP? (FAQ #101378)
  • How many HDLog trend variables can I log into one single CSV-file? (FAQ #101341)
  • Why are my trends from the "HDLog to file" FBoxes not updated? (FAQ #101299)
  • What's the best way to manage with HDLog file creation, saving and deleting? (FAQ #101276)
  • Why does the PG5 build fail when using HDLog File FBoxes? (FAQ #101266)
  • Why is the file not created on the file system and the "LogToFile" FBox shows an error? (FAQ #101235)
  • Why is it not possible to write a file to the memory card with the FBox "Log to file" or "Log to file advanced" (FAQ #101232)
  • How many characters can be written on the file system with one write access? (FAQ #101154)
  • The correct syntax for files and directories is necessary on the filesystem (FAQ #101153)
  • File- or directory- names with spaces are not allowed on the filesystem (FAQ #101152)
  • How to change the configuration of the FTP server? (FAQ #101051)

PG5 2.0 / HEAVAC/HLK/CVC

  • Summer/winter time change with HVC 8 and SNTP Time zone (FAQ #101824)
  • Can I provide an initialisation value in the FBox "Fan Optimizer PI"? (FAQ #101563)
  • Why does the "Automatic Reset" of the "Heavac Init" not work on a PCD1.M2120? (FAQ #101541)
  • Why do I get an error "unresolved externals" when working with HVC templates in the S-Web Editor? (FAQ #101491)
  • How to use the HVC (heavac or HLK) reset option? (FAQ #100244)
  • Why are the Heavac Dialog FBoxes not present in PG5 1.4, 2.0 or 2.1? (FAQ #100150)

PG5 2.0 / Modem library

  • Why does the "Call SMS" FBox indicate an error with code 2144? (FAQ #101553)
  • Why is the "GPRS Status" of the WAA library not always updated? (FAQ #101545)
  • Problem when entering the number of the SMS service center with +41 (FAQ #101333)
  • How to update an SMS call number in runtime? (FAQ #101316)
  • Why is the modem not working anymore on the PGU port (PG5 2.0)? (FAQ #101313)
  • Is it possible to know the level of the GSM signal quality of a GSM modem? (FAQ #101171)
  • Modem GSM: Poll SMS doesn't work properly! (FAQ #100359)
  • How can I know if my SMS was received and processed correctly on the PCD? (FAQ #100121)

PG5 2.0 / Standard libraries

  • Why is the "SASI S-Bus Master" FBox red when communicating with S-Energy Meters? (FAQ #101469)

PG5 2.1 / FBox Libraries

  • Why the PG5 2.1, 2.2 or 2.3 update manger application is no more working and it’s not possible to download files from PG5 update manager server? (FAQ #102020)
  • Shall I use PG5 2.3, PG5 2.2, 2.1, 2.0 or PG5 1.4 for my next project? (FAQ #102018)
  • PG5 2.1 and 2.2 with E-Line S-Bus communication library < 1.2.110, why the S-Bus communication on the master PCD stops either after a certain time? (FAQ #102009)
  • PG5 2.1 and PG5 2.2 with S-Bus communication library 2.7.370, why the S-Bus communication on the master PCD stops either after a certain time or after the download of the program? (FAQ #102008)
  • Why on PG5 2.1 and PG5 2.2 the winter/summer time change does not work with the 'Hevac Initx' F-Box? (FAQ #101979)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download