73
saia-pcd.com
PCD
1
E-Line
NFC
USB
USB
E-Line app
RS-485
Backbone
Automation stations –
E-Line
5
Switch cabinet
components
4
Consumer
data acquisition
3
Dedicated
room controllers
2
Operation
and monitoring
1
Automation
stations
1.5.3
Saia PCD1 E-Line fully programmable modules
The Saia PCD1 E-Line fully programmable modules are for specific applications. For example for room auto-
mation, zone control and decentralised automation. The modules are freely programmed using the Saia PG5®
tool. The Saia PCD1 E-Line series enables autonomous and safe operation of the modules even if communica-
tion to the master station is interrupted. The local function of a room,
for example, is therefore guaranteed at any time.
System properties
Freely programmable modules for specific applications
Galvanic isolation between supply, bus and I/Os
Pluggable terminal blocks protected by covers
Status LEDs on the front
RS-485, USB and NFC interface
Industrial quality
Each wire is a connection
Bus topology and applications
All the modules are freely programmable and can be
operated as “standalone”. Data is exchanged between
them via the RS-485 connection and a terminal,
e.g. a level controller.
Thanks to the options with the autonomous functions,
the modules are ideally suitable for:
Room automation
Zone control
Decentralised automation
LED
The currently active statuses are displayed on the respective LEDs for the inputs and outputs.
The same applies to the voltage supply, communication and errors.
Commissioning with the smartphone
More details on which end devices are supported by this technology and app can be
found on our support page at
.
A USB OTG (on to go) cable is required for connecting via USB.
Connection concept
The modules are supplied with a 24 VDC or AC voltage
supply. Supply to the modules is below.
SBC E-Line app (in preparation) and NFC interface
The fully programmable E-Line modules have a Micro-USB
and an NFC interface.
Various services for commissioning and service are available
using a suitable end device (for example, Samsung Galaxy
S4) and the SBC E-Line app. For example, the connections
can be tested without a loaded program.
The E-Line app can also be used without an NFC connection
using a link via the Micro-USB connection to the module
with the end device.
Level controllers for all rooms on the same floor
