78
saia-pcd.com
PCD
1
E-Line
Automation stations –
E-Line
The programmable analogue module with a housing width of 35 mm (2 HP) has four inputs
and outputs. Each input and output is electrically separated and can be configured separately.
Small and purely analogue tasks such as recording the room temperature and subsequent
control of 0–10 V drives can therefore be realised.
Technical Data
Interfaces
Communication interface
RS-485 with galvanic isolation
Baud rate: 9,600, 19,200, 38,400, 57,600, 115,200 bps (autobauding)
Address switch for S-Bus address
Two rotary switches 0…9
Service interface
USB (Micro-USB)/NFC (near field communication)
General specifications
Supply voltage
Nominal 24 VAC (50 Hz) or VDC (in accordance with EN/ IEC 61131-2)
24 VDC, –15/+20% max., incl. 5% ripple
24 VAC, –15%/+10%
Electrically isolated
500 VDC between power supply and RS-485 as well as between current supply and inputs/outputs
Dimensions
Housing width 2 HP (35 mm), compatible with electrical control cabinet (in accordance with DIN 43880, size 2 × 55 mm)
Mounting type
DIN rail in accordance with DIN EN 60715 TH35 (1 × 35 mm)
Ambient temperature
Operation: 0…+55°C, without forced ventilation
Storage: −40…+70°C
Power consumption
Typical 2 W
System properties
4 analogue inputs
4 analogue outputs
Galvanic isolation between supply, bus and I/Os
Pluggable terminal blocks protected by covers
Status LEDs at the front
RS-485, USB and NFC interface
Freely programmable with Saia PG5®
Device design
Inputs and outputs
Inputs
4 analogue inputs
(adjustable via software)
0…10 V, ±10 V, ±20 mA (0…20 mA, 4…20 mA),
Pt/Ni1000, Ni1000TK5000NTC, KTY
0…2500 Ω, 0…7500 Ω, 100 Ω…100 k Ω
12 bit resolution
Outputs
4 analogue outputs
0…10 VDC, ±10 V, 12 bit resolution
Saia PCD1.W5300-C15 (analogue module)*
4 analogue outputs
2 analogue inputs
Status LEDs
*
In preparation, see Chapter C2 "Product status"
RS-485 interface
USB interface
Address
switch
Supply
System LEDs
2 analogue inputs
