65
saia-pcd.com
PCD
1
Automation stations – Saia PCD1
5
Switch cabinet
components
4
Consumer
data acquisition
3
Dedicated
room controllers
2
Operation
and monitoring
1
Automation
stations
Accessories and consumables for Saia PCD1.Room (PCD1.M2110R1)
Applications must take the exact number of I/Os into account. Coupling relays (e.g.: PCD7.L252) or S-Bus RIOs
(PCD7.L200/L210) required. The S-Bus stations are limited to a maximum of 10 units per PCD1.Room.
The same applies to Modbus stations (total of 10 units).
The EPLAN® electric P8 macros are available
on the support site.
The macros and article data are also provided
on the EPLAN® data portal.
EPLAN macros
EPLAN macros are available for project planning
and engineering
Battery for data backup
Type
Description
4 507 4817 0
Lithium battery for PCD processor unit (RENATA button battery type CR 2032)
Plug-in screw terminal block
4 405 5089 0
Plug-in screw terminal block, 11-pin, labelling 0…10
Terminal X0
4 405 5087 0
Plug-in screw terminal block, 9-pin, labelling 11…19
Terminal X1
4 405 5088 0
Plug-in screw terminal block, 10-pin, labelling 20…29
Terminal X2
Cover
4 104 7759 0
Housing cover for PCD1.M2xxx without SBC logo on-site with an overlay that can be individually designed
Range of uses:
Labelling
The self-adhesive labels can be printed direct with the SBC
LabelEditor from the PG5 Device Configurator
Options for programmable applications:
Radiators
Fan coil applications
Cooling ceiling
VAV – variable air volume
Air quality control
Signal contacts (occupancy control,
presence detection, window monitoring)
Lighting control
Blind control
etc.
Connection options via the following:
Analogue signals (onboard)
S-Bus (onboard)
Modbus (onboard)
Internet access, web server (onboard)
BACnet® with PCD7.R56x (slot M1)
BACnet® MS/TP with PCD2.F2150 (slot I/O 0)
L
on
IP with PCD7.R58x (slot M1)
L
on
FTT 10 with PCD2.F2400 (slot I/O 0)
KNX over IP (IP onboard)
KNX TP with an external coupler
EnOcean with external receiver
Applications
Room control units
