79
saia-pcd.com
PCD
1
E-Line
DALI
ballast
DALI
ballast
DALI
switch
DALI ballast
DALI PIR
PCD1.F2611-C15
230VAC
DALI
Automation stations –
E-Line
5
Switch cabinet
components
4
Consumer
data acquisition
3
Dedicated
room controllers
2
Operation
and monitoring
1
Automation
stations
The freely programmable module with a housing width of 35 mm (2 HP) can be controlled via RS-485
and enable the direct control of 64 DALI subscribers. It has the DALI line as well as four digital inputs.
The user can implement the digital inputs to connect electrical sensors. The module is freely programmable
and can also be used as a “standalone”DALI small controller. For example, smaller DALI lighting systems
for enhanced individual rooms can therefore be implemented and subsequent linking to a higher level
controller is no longer an obstacle.
System properties
S-Bus (RS-485) / DALI interface
incl. DALI voltage supply (can be deactivated)
Up to 64 DALI ballasts
4 digital inputs
Galvanic isolation between supply, bus and I/Os
Pluggable terminal blocks protected by covers
Status LEDs on the front
RS-485, USB and NFC interface
Freely programmable with Saia PG5®
Connection example
Inputs
Inputs
4 digital inputs
24 VAC/VDC, 8 ms/0.2 ms input filter
Saia PCD1.F2611-C15 (DALI module + add. RS-485)*
Device design
2× RS-485
interface
USB interface
Address switch
Supply
4 digital inputs
System LEDs
Status LEDs
Technical Data
Interfaces
Communication interface
RS-485 with galvanic isolation
Baud rate: 9,600, 19,200, 38,400, 57,600, 115,200 bps (autobauding)
Address switch for S-Bus address
Two rotary switches 0…9
Service interface
USB (Micro-USB)
NFC (near field communication)
DALI
incl. DALI voltage supply (can be deactivated)
for up to 64 DALI subscribers
160 mA max. Output current
basic insulation (1350 VAC)
Additional interface
RS-485 in SASI mode C
General specifications
Supply voltage
Nominal 24 VAC (50 Hz) or VDC (in accordance with EN/ IEC 61131-2)
24 VDC, –15/+20% max., incl. 5% ripple
24 VAC, –15%/+10%
Electrically isolated
500 VDC between current supply and RS-485
and between current supply and inputs/outputs
Dimensions
Housing width 2 HP (35 mm), compatible with electrical cabinet (in accordance with DIN 43880, size 2 × 55 mm)
Mounting type
DIN rail in accordance with DIN EN 60715 TH35 (1 × 35 mm)
Ambient temperature
Operation: 0…+55°C without forced ventilation
Storage: −40…+70°C
Power consumption
Typical 2 W
*
In preparation, see Chapter C2 "Product status"
DALI interface
