142
saia-pcd.com
SBC
S-Bus
kWh
kWh
Consumption data collection
4.7
Saia PCD® e-Monitor
Summary of functions
The e-Monitor is an SBC functions HMI, which can be used immediately on delivery with no additional programming. It combines
data capture, visualisation and logging in one compact device. Energy meters and pulse counters connected via the S-Bus interface
are automatically detected and read. Historical data and the web visualisation can be accessed from anywhere via the integrated
automation server using FTP and HTTP. This is also possible with mobile devices using SBC apps.
In addition to the basic functions described in Chapter 4.6, simple control functions are already implemented on the e-Monitor
(i.e. sending of data messages or the parallel recording of multiple load profiles).
The pre-installed S-Monitoring application can be adjusted, extended or replaced as required using PG5 andWeb Editor.
Additional protocols and data (e.g. from an M-Bus meter) can therefore be integrated using the optional communication interfaces.
Supply voltage
Ethernet
(2-port switch)
Ground connection
RS-485
PCD7.F1xxS
Reset
switch
USB
S-Monitoring
application
loaded
Load profile measurement of 8 consumption
values
Sending of data email to up to 5 email addresses
Advanced functions
In addition to the basic functions of the S-Monitoring application (4.6),
the e-Monitor Web Panel includes the following functions,
which are programmed in Saia PG5®:
Load profile measurement
Saia PG5®
fully programmable
and expandable
Optional interface
(programming required)
Internet
Intranet
