144
saia-pcd.com
SBC
M1
Slot A
X2
X1
X0
X3
142
61
142
Consumption data collection
The e-Controller is an SBC functions PCD, which can be used immediately on delivery with no additional
programming. It combines data capture, decentralised visualisation and logging in one compact device.
Energy meters and pulse counters connected via the S-Bus interface are automatically detected and read.
Historical data and the web visualisation can be accessed from anywhere via the integrated automation
server using FTP and HTTP. This is also possible with mobile devices using SBC apps. In addition to the basic
functions described in Section 4.6, simple control functions are already realised on the e-Controller. These include sending alarm emails
and the parameterisation of outputs according to the meter values. The pre-installed S-Monitoring application can be adjusted, extended
or replaced as required using PG5 andWeb Editor. Additional protocols and data (e.g. from an M-Bus meter) can therefore be integrated
using the optional communication interfaces. The design of the controller is suitable for installation in the distribution board next to the
energy meters.
Device installation
Power supply and connection plan
For more information, please see Chapter 1.2.1
Saia PCD3 power supply and connection plan,
and in Manual 26-875.
Power supply 24 VDC
Watchdog relay
RS-485 interface
Terminals for integral
inputs and outputs
Terminals for optional
connection (slot A)
Ethernet connection
(2-port switch)
USB port
Operating LEDs
Slot for
communication
interfaces
Battery
RUN/STOP button
Slot for memory modules
Supply
earth rail
1.5mm
2
/max.25cm
4.8
Saia PCD® e-Controller
Operational on delivery with local IOs
S-Monitoring
application
loaded
Load profile measurement
of 8 consumption values
Sending of alarm and data emails to
up to 5 email addresses
Parameterisation of outputs
via min. and max. values
Advanced functions
In addition to the basic functions of the web application (4.6), the e-Controller
includes the following functions, which are programmed with Saia PG5®:
Load profile measurement
Mounting
Dimensions
on a level surface
on a 35-mm top-hat rail
(in accordance with
DIN EN 60715 TH35)
compact dimensions:
142 × 142 × 61 mm
