-
PCD3.H1xx
-
Counting / SSI modules
-
Documentation
System Catalogue : PCD3
| Extract | 26-215_A0120 | System Catalogue : PCD3 |
PCD2/3.H112/H114
| Datasheet | PP26-507 | PCD2/3.H112/H114 |
PCD2/3.H112/H114
| Manual | 26-885 | PCD2/3.H112/H114 |
Systemcable and adapter
| Manual | 26-792 | Systemcable and adapter |
PCD2.H150|PCD3.H150 SSI interface for absolute encoder
| Manual | 26-761 | PCD2.H150|PCD3.H150 SSI interface for absolute encoder |
Fast Counter Module for Saia PCD2 and Saia PCD3
This universal module enables counting functions up to 150 kHz for controller PCD2 and PCD3.
Absolute encoder module with SSI interface and 4 outputs 24 VDC/0.5 A
The communication between PCD and Fast Counter Module happens over the IO-bus.
| ENG05 |
|
1.34 MB | Download | ||
| FRA05 |
|
1.35 MB | Download | ||
| GER05 |
|
1.35 MB | Download |
PCD2.H150 (xx7/Step7)
Software
PCD9.H11E Version 2.01
| Software | PCD9.H11E Version 2.01 |
H110: Function blocks (instruction list, for PG3, PG4 and PG5)
| EN |
|
.zip | 0.09 MB | Download |
H110 Example for xx7
PCD9.H15E Version 2.02
| Software | PCD9.H15E Version 2.02 |
H150: Function blocks (instruction list, for PG3, PG4 and PG5)
| EN |
|
.zip | 0.06 MB | Download |
Technical reports
Import of Projects from PG3 to PG5
Good to know
PCD2.H150: If you are using MTS Temposonic linear encoders, make sure to either read the position continuously or to read it twice for each measurement. If you don't do this, the transducer reports an old position. The SSI specification is not clear in this point and there are apparently different points of view. Could possibly happen with other SSI encoders.
PCD2.H110: This product is obsolet. Only for NT Systems (PCD2/3.Mxxxx) exist a replacement PCD2.H112/H114 and PCD3.H112/H114
