Saia PCD Supervisor 2.1 Patch 3127_1

This patch include different *.jar files and must be installed manually over the version 2.1 (version 4.8.0.110.5_1.4.3028.3)

To install the patch files please follow the steps:

• Save and Stop the running station in the Workbench
• Close the Saia PCD Supervisor Workbench 2.1
• Stop the Niagara Service in the windows service application
• Copy the .jar files from the patch location into the installation folder/modules of the Saia PCD Supervisor 2.1.
  Override the existing files with the files from the patch.
  (by default C:\SBC\SaiaPCDSupervisor\modules)
• Start the Niagara Service after succesfull copy
• Open the Workbench
• The patch files are installed

Improvements/corrections

The following corrections have been done in the 2.1 Patch 3127_1 patch

• GALEO-16544 - S-Bus Driver Alarms will be send only via e-mail in case the alarms are added into the alarm DB ( alarm state changed )
• GALEO-20375 - S-Bus Driver Alarms triggered in a series are only added once to the alarm DB
• GALEO-11924 - S-Bus Driver conversion does not loose precision in case a linear conversion 0.1 is set

---------------------------------------------------------------------------------------------------------------------------

Saia PCD Supervisor 2.1 (version 4.8.0.110.5_1.4.3028.3)

This version 2.1 does include a complete installation package of the Saia PCD Supervisor
Saia PCD Supervisor version 2.1 is based on the Niagara 4.8 platform from Tridium

It’s possible to install the version 2.1 in parallel to the version 2.0, 1.2, 1.1 and 1.0 of the Saia PCD Supervisor on the PC.

To install the version 2.1 in parallel to other versions you must select/create a different folder during the installation, when you are asked about the installation folder.

Tu use afterwards either the version 2.1, 2.0, 1.2, 1.1 or 1.0 you have to take care which Deamon version is running.

One possibility would be to use different shortcuts like:
C:\SBC\SaiaPCDSupervisorV1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_2\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV2_0\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV2_1\bin\plat.exe installdaemon

If you want to use only the latest version 2.1 on your PC, then it’s possible to uninstall the old version and afterwards install the version 2.1

New features/improvements

• Easy Templating for single and complex objects
  - Description how to create and use templates is available on:
    Manual easy templating.pdf
  - EasyTemplating applicaton library for S-Bus objects
  - Px templates and EasyTemplating application library (multilingual)
• Improved PG5 Import Wizard
  - Refers PG5 mapping table for import of properties and extensions of S-Bus data points
  - Every F-Box (also customized) can refer every Saia PCD Supervisor component (also customized)
• Improved BACnet EDE import
  - Refers BACnet aliasing file to make BACnet points usable for EasyTemplating
  - One application library can be used for different BACnet names
• Saia PCD Supevisor project template
  - Customizable template with unique web browser output
• Energy Monitoring update
  - New licenses model (3 histories usable without runtime limitation)
  - Listed at BAFA to get the eligibility for promotion. (Ability to achieve ISO 50001 certification)
• VykonPro Module Signing
• Deep cyber securiy measures

Bug fixes

• Easy Templating side bar now offers an import and export function
• Easy Templating function does support multilingual (lexicon) function
• Import wizard improvement to add additional slots during import process defined in the PG5 program build
• Import wizard improvement to add additional properties during import process defined in the PG5 program build
• S-Bus stations have a new property to define the read timeout between 200 and 60000 ms (maximum value recommended is 5000 ms)
• HonBACnetVirtualPropertyBinding is not visible in Browser
• Import wizard now support the new HDLog 4.0 F-Box for device import
• S-Bus driver concept changed to have faster reaction times on views after write events were executed. Threads are separated by device to fix cache issues of medias
• In case PCD is in HALT or Stop status the communication to the device will continue an alarm is generated
• In case PCD application and imported PG 5 project CRC does not match an alarm will get generated
• Import Wizard detects arrays and will import the complete array structure
• HonBACnet property page now shows the connected notification call if present
• BACnet trend log objects are aligned to the corresponding data point
• Import wizard fully supports the import of Alarming 2. asv text files
• Imported program and executed program are compared
• SBC Alarm console can now be viewed with read permissions
• SBC Wizard confirm message to overwrite or Skip will no longer be showed for the first-time scan
• E-Mail outgoingaccount connect to imported S-Bus alarm list will no longer send e-mails using the poll frequency (PCD > FW 1.28.37)
• SBC Wizard will take the IP-Address instead of the CPU name of a device to verify if the device was already imported in S-Bus Alarm console can now display the description as alarm message in the console
• HonBACnetVirtualPropertyBinding now supports animated text
• The import wizard now supports the HTML compiler output from PG5 2.3
• Support new point type SBCClock allowing to read on clock CLK_W7 with one license count
• Station copier did not succeed and exception is thrown when Supervisor Upgrade is done from 4.4 U1 to 4.7
• Import wizard radio button in language selection were disabled while importing alarm list
• SBC SVG Icon gallery updated
• S-Bus driver conversion is losing precisions due to converting INT values thru float values
• Alarms toggling S-Bus points
• In case popups are opended the easy template process was blocked from creating popups
• Import Wizard does detect imports of Head Stations belonging to different PG5 project and allows to enter a prefix to not override/merge existing stations (not yet available for Sub Stations)
• Import BACnet EDE files (SBC) using a aliases file to build up folder structure needed for easy templating process

For Niagara 4.8 bug fixes refer to Tridium web site with the following link: 

---------------------------------------------------------------------------------------------------------------------

Saia PCD Supervisor 2.0 (version 4.7.110.32_1.4.3018.0)

This version 2.0 does include a complete installation package of the Saia PCD Supervisor
Saia PCD Supervisor version 2.0 is based on the Niagara 4.7 update 1 framework

It’s possible to install the version 2.0 in parallel to the version 1.2, 1.1 and 1.0 of the Saia PCD Supervisor on the PC.

To install the version 1.2 in parallel to other versions you must select/create a different folder during the installation, when you are asked about the installation folder.

Tu use afterwards either the version 2.0, 1.2, 1.1 or 1.0 you have to take care which Deamon version is running.

One possibility would be to use different shortcuts like:
C:\SBC\SaiaPCDSupervisorV1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_2\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV2_0\bin\plat.exe installdaemon

If you want to use only the latest version 2.0 on your PC, then it’s possible to uninstall the old version and afterwards install the version 2.0

New features/improvements

• Easy Templating for single objects
  Description how to create and use templates is available on:
  Easy Templating Simple Object Creator and Using Simple Object – Quick Guide.pdf
• Application library for single objects (in preparation)
• Improved PG5 Import Wizard including filtering by tags from PG5
• "Delete Points View" allows easy deletion of all unused data points
• "Point-List-View" for easy display, management and documentation of filtered data points
• "Bulk Deploy" For mass processing of data points using Excel (Export/Import)
• Cloud Connector (Action Management, Performance Analytics)
• Deep cyber security measures (specifically to connect to the cloud)
• Energy Monitoring Extension (Provides the ability to achieve ISO 50001 certification for energy management systems - Includes 1 hour demo runtime)
• Alarm Console, Trend Charts and Rolen Manager are completely in HTML5
• New Px-Editor-Tools to guarantee e.g. a responsive design
• Improved BACnet Alarming
• Software Maintenance Reminder

Bug fixes

• The alarm console has no column caption in the browser
• If the conversion of an SBC data point is changed and saved, it is reset to the default after a restart of the station.
• Alarm message - Numeric & enumeration
• Improvements of the wizard for the SBC data import - Changes of the alarm class in the driver
• Saia PCD Import Wizzard Filter Options
• Alarms from BACnet are lost!
• S-Bus Import Wizard does not show all available data points.
• SBC Import Wizard - There should be an option to get to the start page.
• Importing a PG5 file with high load points causes the points in the supervisor to become obsolete.
• The alarm will be imported from the PCD over time in the future.

For Niagara 4.7 u1 bug fixes refer to Tridium web site with the following link: 

---------------------------------------------------------------------------------------------------------------------

Saia PCD Supervisor 1.2 (version 4.7.110.32_1.4.3014.0)

This version 1.2 does include a complete installation package of the Saia PCD Supervisor
Saia PCD Supervisor version 1.2. is based on the Niagara 4.7 update 1 framework

It’s possible to install the version 1.2 in parallel to the version 1.0 and 1.1 of the Saia PCD Supervisor on the PC.

To install the version 1.1 in parallel to the version 1.0 you must select/create a different folder during the installation, when you are asked about the installation folder.

Tu use afterwards either the version 1.0, 1.1 or 1.2 you have to take care which Deamon version is running.

One possibility would be to use different shortcuts like:
C:\SBC\SaiaPCDSupervisorV1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_2\bin\plat.exe installdaemon

If you want to use only the latest version 1.2 on your PC, then it’s possible to uninstall the version 1.0/1.1 and afterwards install the version 1.2

New features/improvements

• Improved PG5 Import Wizard including filtering by tags from PG5
• "Delete Points View" allows easy deletion of all unused data points
• "Point-List-View" for easy display, management and documentation of filtered data points
• "Bulk Deploy" For mass processing of data points using Excel (Export/Import)
• Cloud Connector (Action Management, Performance Analytics)
• Deep cyber security measures (specifically to connect to the cloud)
• Energy Monitoring Extension (Provides the ability to achieve ISO 50001 certification for energy management systems - Includes 1 hour demo runtime)
• Alarm Console, Trend Charts and Rolen Manager are completely in HTML5
• New Px-Editor-Tools to guarantee e.g. a responsive design
• Improved BACnet Alarming
• Software Maintenance Reminder

Bug fixes

• The alarm console has no column caption in the browser
• If the conversion of an SBC data point is changed and saved, it is reset to the default after a restart of the station.
• Alarm message - Numeric & enumeration
• Improvements of the wizard for the SBC data import - Changes of the alarm class in the driver
• Saia PCD Import Wizzard Filter Options
• Alarms from BACnet are lost!
• S-Bus Import Wizard does not show all available data points.
• SBC Import Wizard - There should be an option to get to the start page.
• Importing a PG5 file with high load points causes the points in the supervisor to become obsolete.
• The alarm will be imported from the PCD over time in the future.

For Niagara 4.7 u1 bug fixes refer to Tridium web site with the following link: 

---------------------------------------------------------------------------------------------------------------------

Saia PCD Supervisor 2.0 (version 4.7.110.32_1.4.3018.0)

This version 2.0 does include a complete installation package of the Saia PCD Supervisor
Saia PCD Supervisor version 2.0 is based on the Niagara 4.7 update 1 framework

It’s possible to install the version 2.0 in parallel to the version 1.2, 1.1 and 1.0 of the Saia PCD Supervisor on the PC.

To install the version 1.2 in parallel to other versions you must select/create a different folder during the installation, when you are asked about the installation folder.

Tu use afterwards either the version 2.0, 1.2, 1.1 or 1.0 you have to take care which Deamon version is running.

One possibility would be to use different shortcuts like:
C:\SBC\SaiaPCDSupervisorV1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_2\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV2_0\bin\plat.exe installdaemon

If you want to use only the latest version 2.0 on your PC, then it’s possible to uninstall the old version and afterwards install the version 2.0

New features/improvements

• Easy Templating for single objects
  Description how to create and use templates is available on:
  Easy Templating Simple Object Creator and Using Simple Object – Quick Guide.pdf
• Application library for single objects (in preparation)
• Improved PG5 Import Wizard including filtering by tags from PG5
• "Delete Points View" allows easy deletion of all unused data points
• "Point-List-View" for easy display, management and documentation of filtered data points
• "Bulk Deploy" For mass processing of data points using Excel (Export/Import)
• Cloud Connector (Action Management, Performance Analytics)
• Deep cyber security measures (specifically to connect to the cloud)
• Energy Monitoring Extension (Provides the ability to achieve ISO 50001 certification for energy management systems - Includes 1 hour demo runtime)
• Alarm Console, Trend Charts and Rolen Manager are completely in HTML5
• New Px-Editor-Tools to guarantee e.g. a responsive design
• Improved BACnet Alarming
• Software Maintenance Reminder

Bug fixes

• The alarm console has no column caption in the browser
• If the conversion of an SBC data point is changed and saved, it is reset to the default after a restart of the station.
• Alarm message - Numeric & enumeration
• Improvements of the wizard for the SBC data import - Changes of the alarm class in the driver
• Saia PCD Import Wizzard Filter Options
• Alarms from BACnet are lost!
• S-Bus Import Wizard does not show all available data points.
• SBC Import Wizard - There should be an option to get to the start page.
• Importing a PG5 file with high load points causes the points in the supervisor to become obsolete.
• The alarm will be imported from the PCD over time in the future.

For Niagara 4.7 u1 bug fixes refer to Tridium web site with the following link: 

c

Saia PCD Supervisor 1.2 (version 4.7.110.32_1.4.3014.0)

This version 1.2 does include a complete installation package of the Saia PCD Supervisor
Saia PCD Supervisor version 1.2. is based on the Niagara 4.7 update 1 framework

It’s possible to install the version 1.2 in parallel to the version 1.0 and 1.1 of the Saia PCD Supervisor on the PC.

To install the version 1.1 in parallel to the version 1.0 you must select/create a different folder during the installation, when you are asked about the installation folder.

Tu use afterwards either the version 1.0, 1.1 or 1.2 you have to take care which Deamon version is running.

One possibility would be to use different shortcuts like:
C:\SBC\SaiaPCDSupervisorV1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_2\bin\plat.exe installdaemon

If you want to use only the latest version 1.2 on your PC, then it’s possible to uninstall the version 1.0/1.1 and afterwards install the version 1.2

New features/improvements

• Improved PG5 Import Wizard including filtering by tags from PG5
• "Delete Points View" allows easy deletion of all unused data points
• "Point-List-View" for easy display, management and documentation of filtered data points
• "Bulk Deploy" For mass processing of data points using Excel (Export/Import)
• Cloud Connector (Action Management, Performance Analytics)
• Deep cyber security measures (specifically to connect to the cloud)
• Energy Monitoring Extension (Provides the ability to achieve ISO 50001 certification for energy management systems - Includes 1 hour demo runtime)
• Alarm Console, Trend Charts and Rolen Manager are completely in HTML5
• New Px-Editor-Tools to guarantee e.g. a responsive design
• Improved BACnet Alarming
• Software Maintenance Reminder

Bug fixes

• The alarm console has no column caption in the browser
• If the conversion of an SBC data point is changed and saved, it is reset to the default after a restart of the station.
• Alarm message - Numeric & enumeration
• Improvements of the wizard for the SBC data import - Changes of the alarm class in the driver
• Saia PCD Import Wizzard Filter Options
• Alarms from BACnet are lost!
• S-Bus Import Wizard does not show all available data points.
• SBC Import Wizard - There should be an option to get to the start page.
• Importing a PG5 file with high load points causes the points in the supervisor to become obsolete.
• The alarm will be imported from the PCD over time in the future.

For Niagara 4.7 u1 bug fixes refer to Tridium web site with the following link: 

---------------------------------------------------------------------------------------------------------------------------

Saia PCD Supervisor 1.1 (version 4.4.92.2.1_1.4.1903.3)

This version 1.1 does include a complete installation package of the Saia PCD Supervisor
Saia PCD Supervisor version 1.1. is based on the Niagara 4.4 update 1 framework

It’s possible to install the version 1.1 in parallel to the version 1.0 of the Saia PCD Supervisor on the PC.

To install the version 1.1 in parallel to the version 1.0 you must select/create a different folder during the installation, when you are asked about the installation folder.

Tu use afterwards either the version 1.0 or 1.1 you have to take care which Deamon version is running.

One possibility would be to use different shortcuts like:
C:\SBC\SaiaPCDSupervisorV1\bin\plat.exe installdaemon
C:\SBC\SaiaPCDSupervisorV1_1\bin\plat.exe installdaemon

If you want to use only the latest version 1.1 on your PC, then it’s possible to uninstall the version 1.0 and afterwards install the version 1.1

New features/improvements

Performance improvements:

• Speedier user interface
• Added server side caching technology to deliver browser content faster
• Optimized HTML5 HX Profile for quicker loading times
• Updated internal Workbench Web Browser. This includes improvements in speed as well as enhanced stability and security
  
  

Single Sign On capability allows easy navigation between multiple Niagara connections 

• Stations can be configured to use SAML SSO Authentication Scheme over HTTP/HTTPS
  
  

Scheduler and Alarm Console with full HTML5 support (no longer special plug-in’s needed)

• Live alarm updates, enhanced filters, Hyperlinking, …
  
  

Language packages for German, English, French are included in V1.1.

BACnet Utility improvements

• Priorities can now be defined for Set and Override

Bug fixes

• GALEO-5352 - Error while importing the Data points in SBC supervisor
• GALEO-5349 - Alarm Import is not working since Radio button of language is disabled
• GALEO-5985 - S-Bus value overwrite after change precision at facets
• GALEO-4615 - „SET“ cannot be used on commendable objects if there is any active priority
• GALEO-3894 - NCCB-30270 - Present value overwrite after change precision at facets
• GALEO-4987 - NCCB-10507 - „offNormal > toNormal transition not sent when ack rqd. To Normal unselected
• GALEO-8640 - Set override in hon policies is not followed properly

For Niagara 4.4 U1 bug fixes refer to Tridium web site with the following link:

---------------------------------------------------------------------------------------------------------------------------

Saia PCD Supervisor Patch XXS

• This patch include different *.jar files and must be installed manually over the version 1.0 (version 4.3_1.3.98.0)

Improvements/corrections
The following corrections have been done in the patch XXS patch

• Cyber security patch from Tridium
• Update for cyber security in SBC Offline engineering module
• Correction of issue with *.svg graphics where the *.svg graphics where shifted for some pixels if the visualization is displayed in a standard browser. 

---------------------------------------------------------------------------------------------------------------------------

Saia PCD Supervisor 1.0 (version 4.3_1.3.98.0)

• First official version of the Saia PCD Supervisor
• This version does include a complete installation package of the Saia PCD Supervisor
• It's based on the Niagara 4.3 framework

---------------------------------------------------------------------------------------------------------------------------

PLATFORM REQUIREMENTS

Saia PCD® Supervisor will run on the following operating systems:

• Windows 10 (32-bit)
• Windows 10 (64-bit)
• Windows 8.1 Professional/Enterprise/Ultimate (32-bit)
• Windows 8.1 Professional/Enterprise/Ultimate (64-bit)
• Windows 7 Professional/Enterprise/Ultimate (32-bit)
• Windows 7 Professional/Enterprise/Ultimate (64-bit)
• Windows Server 2012 R2 Standard/Enterprise (SP2) (64-bit)

Your PC must comply with the minimum specification for the installed operating system as specified by Microsoft.

In addition to meeting the requirements for the operating system Saia PCD® Supervisor requires the following:

• Processor : Intel® Xeon® CPU E5-2640 x64 (orbetter), compatible with dualand quad-core processors
• Operating System : Windows 7 (if N4 supports), 10, 64-bit Windows 8.1 Enterprise, Windows Server 2012 Standard and 2012 R2 Standard
• Memory : 4 GB minimum, 8 GB or more recommended for larger system
• Free Hard Drive Space : 4 GB minimum, more recommended depending on archiving requirements
• Display : Video card and monitor capable of displaying 1680 × 1050 pixel resolution or greater
• Network Support : Ethernet adapter (10/100 MB with RJ-45 connector)
• Connectivity : Full-time high-speed ISP connection recommended for remote site access (i.e., T1, ADSL, cable modem)

If enterprise-level data archiving is required (optional), one of the following compatible database applications will need to be installed:

• MS SQL Server 2012
• MS SQL Server 2014