Note that connecting an external terminal is possible even if the PCS1 has already an internal terminal
Yes, the timer relays KOP128j is still available. The timer relays will be (re-) included in the CC catalogue and price list 2009/2010.
We tested the ISDN Modem from Stollman TA+PP2 and TA+USBA successfully!
After an Ethernet module has been replaced (and the IP address remained the same), it is often not possible connecting to the according PCD. The reason is that the PC "remembers" the old MAC address (
What does the output format "1:1" in the FBoxes for temperature sensors (PT1000/NI1000) mean?
If the "MDLS144/288 Data9600 onbit" modem is connected to a "non Saia PCD® COSinus" system (PCD1.M1, PCD2.M1) then it's possible to establish a modem connection to those systems but if the same modem
If for example a Scada system communicate over S-Bus slave gateway port or S-Bus PGU port with a slave station via a master gateway port then after a programm download to the gateway PCD (or if the ga
With Firmware Version 1.201 the program who was stored in PCD7.R400 was not automatically copied into the PCD’s memory when the PCD2.M487 was powered off/on without battery.
