When using the FBox "ABS Init" (version 2.6.197 or earlier) with the mode "Downtime", the switching on and off of the motors / pumps won't work after elapsing of the defined downtime time (1 hour in s
The following error appears when attempting to open the web builder in a windows XP 32bits System. "No license found on this computer, will run in DEMO mode." after the installation of PG5.2.0
In the system catalogue there is a schematic of a PCD connected to a BACnet/IP network which could lead to a missinterpretation. Although BACnet is supported by a PCD3 or a PCD2.M5xx0 and LON on IP wi
In case a BACnet firmware module has been installed on a PCD3.Mxxx0 or a PCD2.M5xx0 and a timezone has been configured, the time stamp of an S-Web alarm has an offset to the PCD time. There could be
In firmware version 0A1 a new functionality has been introduced that allows to use the port 0 (D sub 9 poles) a PCS1 as free port (eg. Serial-S-Bus, MC etc.). This allows the user configuring the PCS1
The TCP port of the FTP server is set by default to 21. It can be changed or adapted for any reasons. If the WebEditor project is downloaded through FTP Server, the port should be specified and a
When using a PCD7.F772 or PCD7.F802 on a PCD2.M1x7 with FW Version 3.110 only the RS 485 communication works. Otherwise the Profibus / LON communication did not work.
From Saia PG5® version 2.1, it is now possible to install several different versions of the PG5 2.0 or 2.1 on the same computer, but only one version can be the "active version".
Yes, there are PCDs that support the transmission of EMails over an SMTP server if they are equipped with Ethernet interface. The PCD types that support this feature are: - PCD1.M1x5, PCD2.M150,
The PCD1.M110, PCS1 and PCD3 are equipped with a supercap. This supercap needs a certain time until it is fully charged.
