Yes, it is possile storing files directly on the flash File System of an MB Panel. By doing so, the page will be displayed faster because these files do not need to be transferred over the communicati
On the attached example you can see, how the RTC of the PCD could be displayed and modified on a Web-page. Also it's possible to know, if the PCD is running or is stoped.
In July 2010 the firmware 1.14.23 has been introduced into production for the PCD2.M5xx0 and the PCD3.Mxxx0. This FAQ lists the main differences between versions 1.10.51 and 1.14.23.
One write access executed with the new version of the FBoxes can write up to 3072 characters (the FBox executes several write commands for 255 bytes each, which is the biggest junk of data which can b
If you have updated your panel from an image $1xxx to $2xxx when powerup it doesn't boot successfully. The screen display SBC and the red line on the bottom doesn't stretch completly (after 3/4 stretc
You are able to read Baud rate, Module address, Status regsiter, Bus timer... on the PCD7.L1xx - L4xx.
With an activated software watchdog the processor monitors itself and restarts the PCD in the event of a malfunction or a loop.
When connecting over a network (VPN), the default timeout can be to small. It is possible to change this timeout by adding an configuration file.
To configure the SNTP with PG5 2.0.200 it is possible to select the timezone by country. Unfortunatly there is an error in the code of the corresponding time zone.
