As a PCD system does feature various "Internet communication features" (Web Server, Ether-S-Bus, SMTP etc.), it suggests itself to connect it to the Internet using e.g. an (A)DSL router. This FAQ is a
On the 8 pin RJ45 connector (on the left side of the PCS1) the pins 3, 4, 5 and 6 are used.
It is correct that the indication of a low battery will appears earlier due to more accurate prediction on a new Saia PCD® COSinus system than before on a PCD2/1.M1xx.
Even the Fbox Clock Super Cap is used in the user programme when the PCS1 is powerup it has lost the initial time!
On the PCD1, and PCD2.M110/120/150 it is possible to put a memory chip as extension memory. The table below contains a list of the supported extension memory chips for classic PCD's.
Switch the GE of Visi.Plus to edit mode Click on free place of your window. Select the menu point "Edit/Properties". In the "Window-properties" window click on the button "Window attribute" There
With firmware 0C0 a short power down can lead to the loss of the production information. In detail this is the product identification, the serial number as well as the production date.
A 2,2 voltage of the battery is sufficient to keep the content of the SRAM memory of the PCD even if the PCD is not powered on with the 24VDC. At power-up, the PCD checks if the battery or supeCAP vo
The price list 2011 does not contain the article number of the screw terminal blocks from a PCD1.M2xxx. This is why the numbers are listed here.
N00: is the standard device N01..99: are customer specific adaption of the device. N17: Stronger housing which does resist better to vibration
