The web-editor 8 does have a new user access control which does allow defining up to 100 users. For each user it’s possible to define an own password, start page and language. It’s necessary that
No, this function is only available on the PCD3.M5xxx.
No, only some of the MB Panels does have a internal buzzer. Only the MB panel with a 66 MHz processor are equipped with a buzzer, the 244 MHz processor MP panel do not have a buzzer!
In case of a configuration problem with an Smart Ethernet RIO (PCD3.T665 or PCD3.T666) an according error message is displayed in the PCD history and the PCD stays in HALT. This FAQ lists the signific
The communication is interrupted for a while (red LED on) and works again by itself (green LEd on) after a few secondes or minutes! Some telegrams are lost.
If the controller is used without an S-Bus connection and there is a power supply interrupt, the occupancy mode (OccMode) of the controller is initialized with the value 1 (unoccupied) after restart.
For our Webserver Demo installation we have worked with different ADSL Routers, none of which was perfect.
Due to a problem of Windows XP and Windows Server 2003, the SCOMMDRV.EXE can exhaust all available memory when using "socket communication" (Ether-S-Bus). The memory leak is related to the "Windows XP
When measuring e.g. the temperature of a Pt1000 sensor with a W-module mounted on a PCD3.T760, the sensor type can be configured in the SBC Network Configurator. If this is done this way, negative tem
Version 0B0 for PCS1 is not to be used, as at each shutdown an area of registers are overwritten by the firmware.
