unless the PCD is connected over a VPN connection only (because even with the password protection of S-Bus will still allow everyone to modify media values as e.g. Register Values [...] communication features" (Web Server, Ether-S-Bus, SMTP etc.), it suggests itself to connect it to the Internet using e.g. an (A)DSL router. This FAQ is aimed to explain some key-points to be considered for [...] direct (for accessing the Web Server of the PCD, don't forget the password protection of the Web Server) Ether-S-Bus (not recommended unless you are using a secure VPN connection) - for programming the
unless the PCD is connected over a VPN connection only (because even with the password protection of S-Bus will still allow everyone to modify media values as e.g. Register Values [...] communication features" (Web Server, Ether-S-Bus, SMTP etc.), it suggests itself to connect it to the Internet using e.g. an (A)DSL router. This FAQ is aimed to explain some key-points to be considered for [...] direct (for accessing the Web Server of the PCD, don't forget the password protection of the Web Server) Ether-S-Bus (not recommended unless you are using a secure VPN connection) - for programming the
: Set the Triac Output 0 to PWM . PWM Time Triac0 should be set between 30s - 600s. In this example it is set to 40s . It is the time for one PWM cycle. Download the [...] the Battery increased short the time duration. Summary of working principle with the Lithium Battery System with passive battery supervision applied on the following PCD’s: PCD [...] 2001 applied on the following PCD’s: PCD1.M2xxx, PCD2.M170, PCD2.M480, PCD2.M5xxx, and PCD3.Mxxxx If the 24VDC power is switched on, then the voltage of the battery is measured during short time all
for EIB/KNX are automatically installed with PG5 2.0 but need to be licensed. As EIB is a slow bus (9600 Bit/s), about 200 to 300 points per connected gateway/EIB line can be handled by a PCD [...] can be programmed, it is possible to listen the bus and to control actuators. To get the actual state of network participants, the PCD can poll them at startup. Quite often PCD's are used as a gateway [...] 101119§ No communication on the EIB Bus and the 'Collision' warning is set to 1 on the FBox! (FAQ #101093) If the cycle time
.7 BACnet Driver : BACnet Driver for Visi.Plus pWA : New HTML5 Webserver PCD Driver : New S-Bus Driver with improved Performance Emails with SSL: Visi.Plus supports now [...] of PG5 does store the modified TAPI settings in the registry of Windows under the key name: HKEY_LOCAL_MACHINE\SOFTWARE\SAIA-Burgess\PG5\x.y\Channels\S-Bus Modem\ Tapi [...] of ProMoS NT, which was distributed by SBC as Visi.Plus until 31.12.2020. Please contact therefore MST for all sales or support enquiries relating to Visi.Plus. Contact details can be found
.7 BACnet Driver : BACnet Driver for Visi.Plus pWA : New HTML5 Webserver PCD Driver : New S-Bus Driver with improved Performance Emails with SSL: Visi.Plus supports now [...] of PG5 does store the modified TAPI settings in the registry of Windows under the key name: HKEY_LOCAL_MACHINE\SOFTWARE\SAIA-Burgess\PG5\x.y\Channels\S-Bus Modem\ Tapi [...] of ProMoS NT, which was distributed by SBC as Visi.Plus until 31.12.2020. Please contact therefore MST for all sales or support enquiries relating to Visi.Plus. Contact details can be found
.7 BACnet Driver : BACnet Driver for Visi.Plus pWA : New HTML5 Webserver PCD Driver : New S-Bus Driver with improved Performance Emails with SSL: Visi.Plus supports now [...] of PG5 does store the modified TAPI settings in the registry of Windows under the key name: HKEY_LOCAL_MACHINE\SOFTWARE\SAIA-Burgess\PG5\x.y\Channels\S-Bus Modem\ Tapi [...] of ProMoS NT, which was distributed by SBC as Visi.Plus until 31.12.2020. Please contact therefore MST for all sales or support enquiries relating to Visi.Plus. Contact details can be found
e.g. be Ether-S-Bus. How can I realize a gateway from BACnet to LON with PCD systems? The currently only solution is the realisation with two systems, which could e.g. be connected with Ether-S-Bus. Why it’s not possible to make the binding with the LonMaker to a PCS1? (FAQ #101132) If a PCS1 does use at the same time a serial communication with > 9’600 baud and the user wants to make a binding with the LonMaker then it’s possible that the binding will not succeed and on the LonMaker there is an error message
% Communication in Bus Terminal topology doesn't work on PCDx.F2xx Module! (FAQ #101091) When more than 1 displays of the same type (PCD7.D23x and PCD7.D290) are connected to a RS 485 port (Bus terminal) of a PCDx.F2xx module, the communication doesn't work. Only one of the displays is available, the other one(s) is (are) not accessible! The ports 100 to 131 available on the PCDx.F2xx modules have different timing properties and are therefore not appropriate for PCD7.D23x and PCD7.D290 in bus terminal topoloy! Workaround: Use
% Communication in Bus Terminal topology doesn't work on PCDx.F2xx Module! (FAQ #101091) When more than 1 displays of the same type (PCD7.D23x and PCD7.D290) are connected to a RS 485 port (Bus terminal) of a PCDx.F2xx module, the communication doesn't work. Only one of the displays is available, the other one(s) is (are) not accessible! The ports 100 to 131 available on the PCDx.F2xx modules have different timing properties and are therefore not appropriate for PCD7.D23x and PCD7.D290 in bus terminal topoloy! Workaround: Use
