• PCD8.P100

  • Programming Cables

Documentation

PCD8.P100 Manual Service and Programming Unit

Manual 26-727 PCD8.P100 Manual Service and Programming Unit

EN01 Archive .pdf 2.94 MB Download

Hardware

Technical Info

Good to know

The PCD8.P100 has been discontinued in 2008 (repair service until end of 2013). For programming PCD controllers the software PG5 can be used together with e.g. a laptop.

 

If you want to program PCD1.Mxxx, PCD2.M150/170, PCD4.M170 or PCD6.M300 you need the intermediate firmware version $301 since S-Bus is not supported by earlier versions. Contact your local SAIA sales company to get this firmware. For the use with PCD1 the use of a PCD8.K101 programming calbe is recommended since with a PCD8.K100 the relatively large inrush current of the P100 can cause the PCD1 to restart when connecting to it.

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download