PG5 2.3 general program examples
Level: medium
Room template for PG5 programmable room controller PCD7.LRxx-P5
The following project templates can be used with PG5 2.3 or newer
Install the template from Project-Configutator with "Restore project..."
PG5 room template
| Manual | PG5 room template |
The room template covers recently required HVAC room automation demands, like heating, cooling, FanCoil, presence detection. Beside this, the template is designed also to emulate a L60x room controller (partly), so a replacement of a L60x room controller by a freely programmable device can be done quite easy.
The room template is dedicated to being used on PCD7.LRxx-P5 devices, but can be used on any other programmable device. In this case, some features must be removed or disabled, e.g. the SYLK Bus wall module (only available on PCD7.LRxx-P5) or the L60x emulation.
The room template has been created with PG5 2.3.
| GER02 |
|
1.56 MB | Download | ||
| ENG02 |
|
1.52 MB | Download | ||
| FRA02 |
|
1.61 MB | Download |
PG5 room template, PG5 2.3 application program
| Software | V 20230629_0940 | PG5 room template, PG5 2.3 application program |
| V 20230629_0940 |
|
.zip | 4.86 MB | Download |
