Every RAIL and SAFE modules fulfil the standard DIN EN 61000-6-2 (interface resistance). That means that the communication "bus line" is proved for an interference resistance +/- 1kV capacitive load
On not NT PCDs like PCD1.M1xx and PCD2.M1xx CPU which coud be equipped with IP modul (but the IP module isn't present) once the Device Configuration and the programme has been downloaded the CPU goes
To shift the PG5 2.0 windows from one screen to the other one you have to set the option “Desktop docking” to “Off” (Menu “Tools, Options” on the Project manager).
If you work with 'Filezilla' or other FTP clients, to access the FTP server on SBC PCD® systems take care about this remark about the active or passive FTP connection. PCD FW < 1.22.xx does support
In very rare cases, the installation process of PG5 2.0.200 (SP2) leads into error “Error -1603 Fatal error during installation.” at the very end of the installation. Then, also a rolling back action
In PG5 2.0.150 (SP1) the behaviour of the FBoxes "Set high" and "Set low" can be different to the behaviour in PG5 1.4. When working with the FBoxes "Set high" and "Set low" from the standard FBox lib
In case the FB parameter checker from PG5 2.0.150 is not able to identify the type of an FB parameter this error is generated while linking the object files to the pcd file.
In 2009 the combined analogue input and output modules PCD2.W5x0 and PCD3.W5x0 will be discontinued. This FAQ suggests possible replacement modules depending on the measured/given signals and the requ
With HW version < A2 of the PCD2.H310 it could happen that the Index position isn't captured properly.
