Due of an error of PG5 2.0 and PG5 2.1 it’s not possible to configure on the device configurator correctly the Profi-S-Bus of the PCD1.M2xx0. The device configurator uses the port 2 for Profi-S-Bus,
While the serial PGU port of systems before the PCD3 did always work as PGU port when connecting a PCD8.K111, the serial PGU port of the PCD3 can be configured for using a modem. If this is done, it i
It is not possible to open the SCONF.exe (part of the standalone up-/downloader). An errormessage of a missing dll MFC42.DLL appears.
If the currently installed license key is to be replaced (e.g. for using a demo version of an FBox library), a backup of the installed user.key file is very handy.
If the local station communicates in Open Data Mode with more than one remote stations, so respect priority in handling the content of the "Channel Register" (indicator for which Channel the data did
If DHCP is enabled in the PG5 device configurator, then the PCD is no longer accessible via the SOCKET connection. The problem occurs with FW1.22.28 and PG5 version < 2.1.310.
In some cases, usually after a lot of backups which have been executed, the error bit 7 (flash task already started) or 8 (flash error) is set with firmware older than 1.14.23.
With the DDC Suite version 2.6.172 (or 2.5.172 for PG5 1.4) the FBox "System hot water 2.0" (in German: "Anlage WWB 2.0") did not switch off even after the "temperature limit during disinfection" has
