Due to not fully compatible firmware chips it isn't possible for the user to download a new FW to the PCD produced between week 48/2003 and 12/2004.
A non standard resolution of the PC screen does affect the play menu of the HMI editor.
When assigning a fixed base address to the symbols of the "Cooling start range" in the adjust parameters from the FBox "MP 6 Way", the build of the PG5 project due fail due to an error.
When configuring a W525 module using the Device Configurator or the Profi-S-I/O (or Profibus DP) Network Configurator, the PCD2/3.W525 does need two registers for the analogue outputs and 8 registers
In the fourth quarter of 2005 a new modem type PCD2.T814 has been introduced. The difference between the PCD2.T813 and the PCD2.T814 is only hardware related. The functionalities and compatibilities r
Depending the PCD type there are up to 3 interfaces to connect the PCD to a Profibus DP or a Profi-S-I/O (or FDL in general) network.
If the CD Image of the PG5 2.0.220 was downloaded from the support page before April 14, 2012 and then written to a DVD the installer can't be automaticaly launched over the autostart page because the
This FAQ explains how PG5 1.4 and 2.0 handles the addresses of dynamic resources like flags and registers.
If unoptimized images are displayed on a MB panel, the panel chooses for each pixel the color that matches best, but the result can be suboptimal. This FAQ proposes a procedure that allows to improve
According to the "Electrical data" section within the manual 26-843 (E2), the "Service life (50% brightness)" of a CE S-Web Panel depends on the model as shown in the following table.
