Why is the error bit 7 or 8 set when I try to execute a "Backup DB to flash"?

FAQ #101466

In some cases, usually after a lot of backups which have been executed, the error bit 7 (flash task already started) or 8 (flash error) is set with firmware older than 1.14.23.

 

Symptom
A backup DB to flash (IL instruction "copy TEXT/DB to flash card", SYSWR 3000 or 3100) fails and the error bits 7 and/or 8 are set. This error remains, even after waiting several minutes without re-attempting a backup to flash.

Solution
This problem is corrected in firmware 1.14.23 or later. Please update your PCD firmware in order to solve this problem.

 

Categories

PCD2 / _Firmware Classic

PCD3 / _Firmware Classic

Local FAQ Deutschland / SEdit (IL programming)

PG5 2.0 / SEdit (IL programming)

Last update: 30.05.2015 21:32

First release: 21.07.2010 17:35

Views: 42788

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download