. How to configure the S-Bus address on a ALE3? (FAQ #101476) The S-Bus address of an ALE3 with Serial-S-Bus interface can be configured by the following procedure. Setting the S-Bus address Navigate to the "Tariff 1 total" (the blue bar must be right below "T1total"; it can be moved with the "arrow
If you want to use the S-Bus OPC-Server and PG5 on the same PC then you have to make attention to use the correct version of the S-Bus OPC-Server which fit with the corresponding version of the scommdll.
. Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems [...] unassigned. This is the case if there is a falling and later on a rising edge on the input "Sasi" of the FBox "SASI S-Bus extended". On the second attempt to assing the port as gateway master port the FBox
about how to plan S-Bus networks can be found in the documentation area. A system partner provides a tool that allows to optmize the S-Bus communication by setting priorities for different telegrams in [...] /UDP. CPU's can be configured as gateway, so they can link several networks. Standard on all Classic CPU's. Details about how to plan S-Bus networks can be found in the documentation area. A system partner provides a tool that allows to optmize the S-Bus communication by setting priorities for different telegrams in form of an Excel sheet. Please refer to www.engiby.ch for more details. All PCD CPU's
L60x Config, L60x Room FBoxes indicates that everything is ok: The FBox LED is green, but there is no actualisation of the values in the roomcontrollers. It's not possible to modify any parameter
When more than 1 displays of the same type (PCD7.D23x and PCD7.D290) are connected to a RS 485 port (Bus terminal) of a PCDx.F2xx module, the communication doesn't work. Only one of the displays is available, the other one(s) is (are) not accessible!
. Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems [...] unassigned. This is the case if there is a falling and later on a rising edge on the input "Sasi" of the FBox "SASI S-Bus extended". On the second attempt to assing the port as gateway master port the FBox
. Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems [...] unassigned. This is the case if there is a falling and later on a rising edge on the input "Sasi" of the FBox "SASI S-Bus extended". On the second attempt to assing the port as gateway master port the FBox
. Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems [...] unassigned. This is the case if there is a falling and later on a rising edge on the input "Sasi" of the FBox "SASI S-Bus extended". On the second attempt to assing the port as gateway master port the FBox
. Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems [...] unassigned. This is the case if there is a falling and later on a rising edge on the input "Sasi" of the FBox "SASI S-Bus extended". On the second attempt to assing the port as gateway master port the FBox
