speed of the PCD7-L60x-1 Example: If the register has the value: ‘30’ then the maximum speed would be 3 and the minimum speed 0 ‘22’ then the maximum speed would be 2 and the minimum speed 2 -> the [...] . Which inputs values needs the FBox 'Man AO' (L60x-1 Man AO) to control the Y3/Y4/PWMs outputs on a PCD7.L60x-1 controller? (FAQ #101837) [...] FBox family 'RoomControler PCD7_60x V2' does need to have a decimal value without decimal point. (for an output value of 8.3 V the decimal value 83 have to be set) This FBox allows the manual
speed of the PCD7-L60x-1 Example: If the register has the value: ‘30’ then the maximum speed would be 3 and the minimum speed 0 ‘22’ then the maximum speed would be 2 and the minimum speed 2 -> the [...] . Which inputs values needs the FBox 'Man AO' (L60x-1 Man AO) to control the Y3/Y4/PWMs outputs on a PCD7.L60x-1 controller? (FAQ #101837) [...] FBox family 'RoomControler PCD7_60x V2' does need to have a decimal value without decimal point. (for an output value of 8.3 V the decimal value 83 have to be set) This FBox allows the manual
7.T160 D-Sub 9pin on PCD Port 2 on PCD3.M3 and M6 A=RxD /TxD-N green D pin 8 D B=RxD /TxD-P red D/ pin 3 /D Example for the port 3 of the PCD3.M5540 as Serial-S-Bus RS485 connection (Serial-S-Bus) between PCD3.M5540 port 3 (S-Net D-Sub used as RS485 Serial-S-Bus) and PCD2.M5540 port 2 (connector block X3): PCD3.M5540 (D-Sub "S-Net", port 3) PCD2.M5540, X3, port2 equipped with a PCD7.F110 pin 3 terminal 2 pin 8 terminal 1
memory' if language is changed to Hebrew • Fupla crashes when clicking on Tab key in properties window/FBox reference Device configurator: • PCD1.M2120, the upload module was displayed as PCD3 [...] Saia5_15_02.jar, IMasterxx7_5_15_02.jar Bacnet: • Crash if tried to open a BACNet file which is deleted in Device Folder • For PCD3.Mxx60 and PCD1.M2xxx a donwnload of the program does not erase the whole [...] PCD2.M5 to 14335 (instead of 8191), see FAQ 101447 . Support of new hardware (PCD1.M2120, PCD3.Mxx60) Support of Windows Server 2008 For more detailed information and further new features
trace back a crash, a dump of the whole memory (SRAM, DRAM and FLASH) of a PCD can be done. This FAQ does apply to PCD1.M2, PCD2.M480, PCD2.M5xxx, PCD3 (including PCD3.Mxx60) and PCD [...] Tool.exe in the PG5 directory. PCD1.M2 PCD2.M480 PCD2.M5 PCD3 PCD3.Mxx60 (fast CPU) PCD7.D4xxxT5F (programmable MB-panels) Usage of the old stand alone tool SaiaDump.exe: This tool [...] Dump.exe) Download the archive "SaiaDump_V1_3_006.zip" from this FAQ Unpack the *.zip archive on your PC or Laptop In the extracted folder "SaiaDump" you'll find several batch files (e.g. RUN_DUMP_PCD1M
connected to PCD3.Mxxx or PCD2.M480 PLC's over Profi S-Bus, the terminal loses the communication after some time and get even frozen. This problem is corrected in the new boot, FW and driver. The PCD8.D81 V 5.09 is needed , the attached files have to be copied in it (see procedure below). It is also necessary to update the PCD3.Mxxx and PCD2.M480 FW with the version PCD3.Mxxx_023.blk / PCD2.M480_$27 or [...] 01 0271 0022 fexible cable Note: If the bautrates isn't greater than 187,5 bautes (for ex. Profi S-Bus with PCD3.M3xx / PCD7.D7xx) you can use other more advantegeous cable, especially
of waiting for the completion of the upload process. Solution The firmware version 1.10.51 (for the PCD3 or the PCD2.M5) together with the BACnet firmware 1.10.50 are more robust and can cope [...] address bound to an IP address. Does a PCD generate gratuitous ARP telegrams? No, a PCD (e.g. a PCD3, a PCD2.M5xxx or a PCD equipped with a PCD7.F655) does not generate gratuitous ARP telegrams when [...] which could be used on a PCD3 or a PCD2.M5xx0 (given no other ODM code is implemented on the system). This code can be added to a CPU in PG5 1.4.300 project using the "Add files..." (from the context menu
Product Category Archive OEM Products PCDs for Step7/HiGraph/SCL PCD3.M [...] commercially available products. PCD3.M5xx7 and PCD3.M [...] PCD3 On a PCD3.M6860 it’s possible to use BACnet
configuration, the Ethernet and DHCP parameters organization has been re-organized. The following device and modules are now integrated into the Device Configurator: PCD3.T665/6, PCD1.M2020, PCD2.C1000, PCD2/3.B160, PCD2.F27x0 and PCD3.F27x and the PCD3/7.R580 and PCD3/7.R581. The Label Editor, included in the Device Configurator, has been updated in order to define and print labels for the PCD1.M2xx0 devices [...] new flash backup/restore to file system function which also includes the media (Register, Flags, Timer, Counters) described in FAQ 101622 (for PCD2.M5 and PCD3) and FAQ 101632 (for PCD1.M2). The
work on port 2 on PCD3.M3x60 & PCD3.M5360. PCD3.M6860: Ping request from over rooter from different sub net is not respond. PCD3.M6860/M880: Profibus/S-IO/Profi-SBus does not work stable. PCD3.M [...] 2220-C15 Support of PCD2.M4x60 Support of PCD3.M3160/PCD3.M3360/PCD3.M5360 Support of PCD3.M6880, PCD3.T668 Standby-CPU-System Improvements PCD2.M4x6x, support Interrupt when reaching the [...] COSinus FW 1.28.37 was released as maintenance version for the systems: - PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 . In June 2017: the COSinus FW 1
