The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.
OPC Server for SBC S-Bus
PCD8.C59xx
OPC-Server
OPC DA 2.05a compliance Test (OPC foundation)
OPC Server fast introduction
S-Bus OPC Server PCD8.C59001E1 | PG5 V2.0.150 / 2.0.200
Software | V 2.02.17.20 / PG5 2.0.xxx | S-Bus OPC Server PCD8.C59001E1 | PG5 V2.0.150 / 2.0.200 |
including English documentation version 2.02.17.17
(Scomm.dll version 2.0.150) This version runs together with PG5 V2.0.150 and 2.0.200
EN 12/2010 | Download |
S-Bus OPC Server PCD8.C59001E1 | PG5 V1.4.300
Software | PG5 V1.4.300 | S-Bus OPC Server PCD8.C59001E1 | PG5 V1.4.300 |
including English documentation version 2.02.17.17
(Scomm.dll version 1.4.300) This version runs together with PG5 V1.4.300
EN 12/2010 | .zip | 13.52 MB | Download |
S-Bus OPC Server PCD8.C59001E1 | PG5 V1.3
Software | PG5 V1.3 | S-Bus OPC Server PCD8.C59001E1 | PG5 V1.3 |
including English documentation version 2.02.10.20
(Scomm.dll version 1.3.120) This version runs together with PG5 V1.3
EN 03/2005 | .zip | 6.06 MB | Download |
S-Bus OPC Server PCD8.C59001E1 | PG5 V1.2
Software | PG5 V1.2 | S-Bus OPC Server PCD8.C59001E1 | PG5 V1.2 |
including English documentation version 2.02.09.01
(Scomm.dll version 1.2.130) This version runs together with PG5 V1.2
EN 02/2004 | .zip | 5.36 MB | Download |
Software (except PG5) / OPC Server
- It's possible to connect SBC PCD's directly to the internet? (FAQ #102060)
- Why are floats not detected when importing symbols from PG5 2.0.210? (FAQ #101709)
- What are the main differences between OPC server version 2.02.18.03 and 2.02.16.14? (FAQ #101539)
- On which Windows oprating system the S-Bus OPC-Server can be used? (FAQ #101057)
- Why the quality of the OPC-Server items is shown as bad on the OPC-Client after importing a configuration from a csv file in to the OPC-Server? (FAQ #100929)
- On the S-Bus OPC-Server, what is the new parameter “delay” on the station settings page? (FAQ #100910)
- Why the OPC-Server is started several times? (FAQ #100901)
- Information’s about TAPI modem settings on PG5. (FAQ #100891)
- It's possible to know the CPU status of the PCD? (FAQ #100760)
- Why does the OPC server crash? (FAQ #100571)
- How to make systems symbols with HVC Fbox internal variables? (FAQ #100250)
- How to import system symbols in OPC server? (FAQ #100247)
- Compatibility of the S-Bus OPC-Server with PG5 1.2 and PG5 1.3 (FAQ #100240)
- Driver not available for user when OPC server was started by OPC client (FAQ #100238)
- No communication with PCD, data quality 'Bad, Comm Failure' (FAQ #100215)
- Only one station of a S-Bus network has "good" communication (FAQ #100149)
Software (except PG5) / SCOMM
- Are SBC devices affected by the zero-day vulnerabilities ‘Ripple20’, related to the low-level TCP/IP software library developed by Treck, Inc.? (FAQ #102036)
- Can PG5 access more than 32 serial communication ports (ComPorts)? (FAQ #101339)
- Information’s about TAPI modem settings on PG5. (FAQ #100891)
- Memory leak from SCOMM on Windows XP (FAQ #100875)
- SCommDll fails with strange status on multi core CPUs (FAQ #100674)
- ScommDll doesn't work because of firewall software (FAQ #100323)
- How to set up the SComm to connect a PCD over a server? (FAQ #100248)
- Compatibility of the S-Bus OPC-Server with PG5 1.2 and PG5 1.3 (FAQ #100240)
- Driver not available for user when OPC server was started by OPC client (FAQ #100238)
- Is a driver for SBC S-Bus available? (FAQ #100179)