Programmable Controller SBC PCD3 system
-
-
PCD3.M2xxx Compact CPU base units
with onboard I/Os and in case of the Wide Area Controller modem
Onboard interfaces: USB, RS-485, Ethernet, (Modem)
-
-
PCD3.M3xxx CPU base units
with 4 I/O module slots.
Onboard interfaces: USB, RS485, Ethernet
Link to PCD3+ CPU page (fast CPU)
-
-
PCD3.M5/6xxx CPU base units
with 4 I/O module slots.
Onboard interfaces: USB, RS232, RS485, Ethernet, Profibus, CAN Basic.
Slots for memory modules and battery module
Link to PCD3+ CPU page (power CPU)
-
-
PCD3.M6860/6880 CPU base units (Power CPU) with 2 independent Ethernet ports
with 4 I/O module slots.
Onboard interfaces: USB, RS232, RS485, Ethernet, Profibus.
Slots for memory modules and battery module
Link to PCD3.M6860 CPU page (power CPU)
-
-
PCD3.M6893 base units (Power CPU) with 2 independent Ethernet ports and 4 I/O module slots, allows high-level language programming in accordance with IEC 61131-3 including object-oriented methods and Cyber security.
with 4 I/O module slots.Onboard interfaces: USB, USB Host, RS485, Ethernet, CAN.
Slots for aditional RS485 module and uSD memory module
Link to PCD3.M6893 CPU page (power CPU)
-
-
PCD3.T6/7xx Remote I/O's with 4 I/O module slots.
Link to PCD3.T760 (Profibus DP RIO's)
Link to PCD3.T66x (Smart Ethernet RIO's)
-
-
PCD3 I/O modules
More than 50 modules with differing functionality
PCD3.Axxx/Bxxx/Exxx/Fxxx/Wxxx
PCD3
- How can the micro SD memory card on the circuit board of a PCD controller be replaced? (FAQ #102067)
- Are devices or software developed from Saia-Burgess Controls affected by the Domain Name System (DNS) vulnerabilities, published with the report name NAME:WRECK? (FAQ #102046)
- Are devices or software developed from Saia-Burgess Controls affected by AMNESIA:33 or SUNBURST? (FAQ #102042)
- Why on a PCD3.M5/6xxx or a PCD2.M45xx the battery LED is switched on and the battery error message is activated in the application program after a new battery was inserted? (FAQ #102039)
- Are SBC devices affected by the zero-day vulnerabilities ‘Ripple20’, related to the low-level TCP/IP software library developed by Treck, Inc.? (FAQ #102036)
- On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031)
- Is it possible to use a 16 DI/O module on the base addresse 240? (FAQ #101671)
- Important remark when updating the PCD firmware to 1.16.xx (FAQ #101587)
- Why does the BACnet "Upload/Merge" not work on very busy IP networks? (FAQ #101417)
- Why is there a difference in the power consumption calculation between the Excel sheet and the Device Configurator? (FAQ #101398)
- Does a PCD automatically generate "gratuitous ARP" telegrams? (FAQ #101045)
- Order numbers for I/O cover and battery module cover (FAQ #100945)
- Why doesn't my CPU go in RUN after download, even if this download option has been activated? (FAQ #100942)
- Why goes the PCD3 in HALT with a BUS Error when changing the Profi S-Bus configuration in the hardware settings (FAQ #100828)
- How can the bus be terminated on Port 3 of a PCD3.M5340 (FAQ #100766)
- Why can't I connect a PCD3.M5xx0 over the serial PGU port? (FAQ #100737)
- Virtual Private Network (VPN) in the example of BacNet (FAQ #100730)
- How long does it take to load the supercap? (FAQ #100707)
- The init-string with PIN-code for the GSM modem (G736-AS2) does not work on the PCD3 (FAQ #100654)
- Conflict between communication module (PCD3.F1xx) and memory module (PCD3.Rxxx) (FAQ #100636)
- It is not possible to use the internal backup memory with FW <030 (FAQ #100616)
- allowed Firmware for PCD3.M5540 hardware version D (FAQ #100590)
- How should the PCD3 User LED work? (FAQ #100565)
- Is it possible to download an xx7 firmware to a classic PCD and invers? (FAQ #100557)
- Intelligent modules aren't correctly detected on HW version older than "D" (FAQ #100549)
- Is it possible to use the S-Net MPI port as free RS 485 port? (FAQ #100529)
- Why does the ethernet communication stop after a few days/weeks (FAQ #100528)
- Is the XOB 5 "No response from I/O module (I/O Quit Failure)" supported by the PCD3? (FAQ #100501)
- Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port (FAQ #100500)
- Why can't I connect a PCD over Ethernet after replacing its Ethernet module? (FAQ #100156)
- Can input/output modules be changed under tension (hot-plug)? (FAQ #100111)
PCD3 / Txxx
- Why are the inputs and outputs of a PCD3 systems not switched on and off correctly, or switched on and off randomly, or the I/O status not detected correctly in the PLC? (FAQ #102063)
- It's possible that the same master PCD is able to handle PCD3.T665/T666 and PCD3.T660? (FAQ #101842)
- Using a PCD3.A860 on a RIO (FAQ #101551)
- Is the "full duplex" mode supported by the Ethernet ports of a PCD? (FAQ #101365)
- Why can't I download an I/O configuration to a PCD3.T760? (FAQ #100971)
- How to configure the PCD3.W800 and A810 on an RIO Module PCD3.T760? (FAQ #100570)
- Are the modules PCD3.W800, PCD3.A810 and PCD3.A860 supported by the PCD3.T760? (FAQ #100504)
PCD3 / _Firmware Classic
- It's possible to connect SBC PCD's directly to the internet? (FAQ #102060)
- What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102058)
- On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031)
- Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
- PCD Firmware 1.28.16 or 1.24.69 fix the Ethernet frame padding information leakage (FAQ #102011)
- What are the differences between the COSinus firmwares FW 1.28.11 and FW 1.28.51? (FAQ #102010)
- Lon Bindings lost after power off / on with FW 1.26.15 (FAQ #101999)
- What are the differences between the COSinus firmwares FW 1.24.67 and FW 1.26.31? (FAQ #101987)
- What is the meaning of the PCD history entry ‘FWDnld UnknownFW’? (FAQ #101959)
- MUKE error 100xxxxxH (FAQ #101933)
- How to find more information based on the error message "SF not loaded"? (FAQ #101568)
- What does CSF stand for? (FAQ #101566)
- What are the differences between firmware 1.10.51 and 1.14.23? (FAQ #101470)
- Why can't I send more than 512 bytes using the STXT instruction? (FAQ #101468)
- Can I have more than 16 COBs? (FAQ #101467)
- Why is the error bit 7 or 8 set when I try to execute a "Backup DB to flash"? (FAQ #101466)
- What are the differences between firmware 1.10.16 and 1.10.51? (FAQ #101422)
- How to define a comma as separator in interpreted texts? (FAQ #101392)
- Potential data loss on SD cards bigger than 256 MBytes (FAQ #101377)
- Is the "full duplex" mode supported by the Ethernet ports of a PCD? (FAQ #101365)
- Overview of the current production firmware versions (FAQ #101304)
- What does "Saia PCD® COSinus" stand for? (FAQ #101297)
- How to implement a software watchdog (FAQ #101285)
- Why does the S-I/O communication no longer work on a PCD3 or a PCD2.M5? (FAQ #101244)
- What is the "WebServer2" on Saia PCD® COSinus systems? (FAQ #101191)
- Can I calulate with IEEE floating point values on a PCD system? (FAQ #101188)
- Can I read a value from a PCD text and copy it into a register? (FAQ #101187)
- Is it possible to search an expression within a PCD text? (FAQ #101186)
- The XOB 8 is no longer called on the systems Saia PCD® COSinus. (FAQ #101137)
- Why does the communication on the PCD3.F281 not work? (FAQ #101090)
- Why does a "KRNL ERROR" or a "SWTO Error" occur? (FAQ #101069)
- What criterias are to be fulfilled for sending e-Mails from the PCD? (FAQ #101054)
- Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page? (FAQ #100963)
- Is it possible reading the PCD "IP address" from the user program? (FAQ #100952)
- How does the system watchdog work? (FAQ #100908)
- How to dump the memory of a PCD (with Saia PCD® COSinus firmware)? (FAQ #100833)
- Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480 (FAQ #100798)
- Why is the Port 3 on the PCD3.M5340 not running correctly in RS 485 mode? (FAQ #100765)
- Download of PCD3 firmware fails on END command (NAK response) (FAQ #100742)
- New firmware version names for Saia PCD® COSinus systems (a.bb.cc) (FAQ #100741)
- Why can't I connect a PCD3.M5xx0 over the serial PGU port? (FAQ #100737)
- PCD3.Mxxxx Real Time Clock (RTC) corruption (FAQ #100712)
- Can I use the character mode with XON/XOFF protocol on NT-PCD's? (FAQ #100700)
- Download of PCD3 firmware fails on END command (no response) (FAQ #100681)
- Download of PCD3 firmware fails with "NAK response" (FAQ #100679)
- Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems (FAQ #100655)
- Conflict between communication module (PCD3.F1xx) and memory module (PCD3.Rxxx) (FAQ #100636)
- allowed Firmware for PCD3.M5540 hardware version D (FAQ #100590)
- Intelligent modules aren't correctly detected on HW version older than "D" (FAQ #100549)
- Why is the message: "cannot create page content yet" appears from time to time (FAQ #100527)
- PCD8.K120 doesn't work after FW download to PCD3 (FAQ #100524)
- Why does "Sasi Slave" on Port 1 / 0 (RS232) of the PCD3 generate an error? (FAQ #100420)
- PCD3 problem with "Real TIME CLOCK" Firmware V010 (FAQ #100387)
- lose Hardware settings after Firmware update (FAQ #100366)
- FW depending differences in the handling of the diagnosic flags (FAQ #100321)
- Error LED of PCD is lit! How to find the problem? (FAQ #100269)
- Download of the wrong FW to a PCD3 possible (FAQ #100259)
- What EPROM burner is recommended to create firmware chips for PCD's? (FAQ #100256)
- Firmware version naming of non-Saia PCD® COSinus systems (FAQ #100176)
- Not all History entries can be found in the Online Help of PG5 (FAQ #100173)
- Why is the instruction DSP not supported on Saia PCD® COSinus systems? (FAQ #100034)
PCD3 / T665 | T666
- For the PCD3.T665/T666/T668 it’s possible to define on the PG5 device configurator own FTP users, service key or the web-server password? (FAQ #102038)
- Why is the diagnostic flag of the PCD3.T665 / T666 partially not automatically reset on the Ethernet Smart-RIO manager after Ethernet network interruption? (FAQ #101995)
- Why appears the following S-RIO internal error message? (FAQ #101940)
- Can I use DALI on the PCD3.T666? (FAQ #101902)
- On PG5 2.1 the 'fatal error 2004' is shown after building a project where a smart RIO PCD3.T665/T666 is used. (FAQ #101871)
- The data exchange to smart RIO does not work with certain FW version! (FAQ #101860)
- It's possible that the same master PCD is able to handle PCD3.T665/T666 and PCD3.T660? (FAQ #101842)
- What are the differences between firmware 1.16.69 and COSinus FW 1.22.61? (FAQ #101820)
- SWeb Alarming is not supported on Smart-RIO PCD3.T665 / PCD3.T666 (FAQ #101803)
- Why the exchange of ‘data transfer array’ between the PCD3.T66x smart RIO’s and the smart automation manager does no more work after installing the patch 1 of PG5 2.0.220? (FAQ #101785)
- What is the signification of the history entry "ESIO CFG FAIL nn"? (FAQ #101778)
- Can I "stop" the programm execution of a Smart Ethernet RIO (PCD3.T665 or PCD3.T666)? (FAQ #101768)
- Diagnostic flag from SMART RIO is high for a short time after a program download (FAQ #101752)
- Why can't I detect that the RIO manager is missing during the start of the RIO? (FAQ #101653)
- Why is the diagnostic flag "ManagerNotPresent" on the RIO not set? (FAQ #101652)
- Why does the data exchange to the RIO not work after the program has been restored? (FAQ #101640)
- What are the differences between firmware 1.14.23 and 1.16.69? (FAQ #101624)
- Which special modules can I plug on the PCD3.T666? (FAQ #101603)