saia-pcd.com
223
PG5
IPChannel
S-Bus Master IP
―
Cir
Err―
ref.Channel
SEND
―En Err―
―D0
―D1
―D1
Internet
Intranet
PCD3.M6860
1
SBC software
3
SBC S-Web technology
2
Communication &
Interaction
Communication & Interaction
4
Room automation
The Ether S-Bus and Ether S-IO protocols support the operation of Saia PCD® controllers and Smart RIOs on Ethernet. The PCD devices
can be integrated and operated in a standard Ethernet network (along with other devices). Multi-protocol operation is supported on
the same connector and cable. That means that all IP protocols (e.g. access to the automation server) can be used in parallel with S-Bus
and/or S-IO.
Ether S-Bus for operating PCD controllers with Ethernet
Ethernet 2
PG5, SCADA, OPC,
web browser
Ether S-Bus
Ethernet
Properties, functions
Ether S-Bus supports communication between
PCD controllers in multi-master operation
a PCD controller and the PG5 programming device
a PCD controller and the OPC server or SCADA system with Ether S-Bus drivers
a PCD controller (PCDWebServer) and web browser with Web Connect software
Programming the data transfer between PCD controllers with FBoxes for cyclic or event-controlled
data transfer
Multi-protocol operation on the same Ethernet connection
(e.g. Ether S-Bus, Ether S-IO and other protocols such as Modbus TCP)
Gateway function for gateways
(Ether S-Net
Serial S-Net, Ether S-Net 1
Ether S-Net 2, Ether S-Net
Profi S-Net)
The PCD3.M6860 CPU can be used to construct separate networks or redundant Ethernet networks
The network can be constructed using standard Ethernet components
IP protocol: UDP
Port number: 5050 (a firewall may require this port to be activated)
Smart RIO Manager
Smart RIOs
PCD3.T66x
Ether S-IO protocol for operating Smart RIOs with Ethernet
Ethernet
Ether S-IO
Ether S-Bus protocol in the multi-master operation on a standard Ethernet network
Ether S-IO for operating Smart RIOs PCD3.T66x
Properties, functions
Ether S-IO supports the exchange of data between Smart RIO
Manager and the Smart RIOs. Ether S-Bus is used to transfer
the configuration and all programs
It uses broadcast or unicast telegrams (adjustable)
The data transfer is configured by the RIO network
configurator
Multi-protocol operation is supported
The network can be constructed using standard Ethernet
components
IP protocol: UDP
Port number: 6060
PG5,
SCADA,
OPC,
Web
browser
2.5.2
Ether S-Net: S-Bus and S-IO protocol with Ethernet
