To access a RS 485 network from a PC / Notebook a converter is needed.
There have been some restrictions concerning the usage of the S-Bus parity mode as master (SM1) on the PCD3.M and PCD2.M5 CPU. Since firmware version 1.10.51 these restrictions are eliminated.
More and more products are equipped with an USB port for programming, which is very useful.
When you use BACnet Schedule objects you have to know that the Present Value will be set back to "Schedule Default" at midnight. This is defined in the BACnet Standard. The FAQ describes how to de
Due to the different electric properties of the RS232 driver mounted on the PCD7.F121 produced between June 2009 and September 10 2009, these modules do not work at all or not correctly when mounted o
In case more than one PCD2.R6000 produced before August 2009 are installed on a PCD2.M5xxx, the PCD does not properly initialize the file systems during start up. As result the file systems can not be
It is possible to connect a PCD over a server. This means that the PCD is connected to a remote PC (server). PG5 on the local PC will connect the SCommDrv on the remote PC and therefore reads the med
Due to an error in the HMI Editor 1.4 this error can appear when using HMI Editor
The values of persistent containers are stored permanently on the file system. If you close MicroBrowser the values of the persistent containers are not lost.
When using PCD1 with a flash additionnal memory, after program download the CPU goes in halt, with the error: checksum fail if the CPU name starts with a number and/or contains an accent (eg: 1er étag
