For BCU1 protocol not all communication interfaces of a PCD3 or a PCD2.M5540 can be used. On the other hand there is no problem using the newer FT1.2 protocol which is supported by all RS232 interface
Yes, the PCD2.M480 is able to handle two TCP/IP (PCD7.F655) modules.
Using PG5 1.4 with the EIB library < 2.5.121 the BCU might "hang" when colliding messages (from and to the PCD) with a certain traffic level occurs. This does happen with any CPU used.
PG3 and PG4 have been replaced by PG5 years ago, but are still used quite often. What is the situation regarding technical support?
PG3 is a software that is running on the OS (Operating System) DOS. It isn't compatible with newer Windows products such as W2k or XP. This is mainly because of the different communcation port interfa
Use caution when downloading FW to a PCD3.Mxxxx controller because it is possible downloading a wrong FW (e.g. the one for the PCD2.M480). Once the wrong FW is downloaded follow this procedure for do
If PG5 1.4.300 and a software from Nokia or Microsoft Mobile are installed on the same PC, it can occur that program files generated from PG5 add-on tools (HMI Editor, Web Editor, BACnet Configurator
Yes, it is possible to add a new curve in an existing trending diagram during runtime of the web page using a new field.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer
