This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer
A program that handles H-modules does most likely include FBs (that are provided together with the PG5 Contols Suite). If a project was created with an older version of the programming tool, also the
The first document describes the configuration between UNIGYR PRU and PCD2 For mounting and installation instructions we refer to the SBC Manuals PCD2 26/737 The second document describe an PG5 Vers
You have to check with your provider if such a service is supported.
If you change the baudrate in a SNet the new parameters must be downloaded with "Download hardwaresettings". Rebuild and download also all programs.
A Profi S-I/O Network is communicating properly. When the ESA terminal is connected to the networt too, the Bus stops for a while.
If a software box is placed to communicate with a wrong actuator type, the message "module type" appears into the master box.
In the Exor programming tool the S-Bus driver parameter displays what looks like Data mode parameters (Parity:no, Data bit: 8, Stop bit: 1) but in reality Parity mode is needed!
In Italy it’s only possible to send a SMS with a GSM modem. The sending of SMS with analogue or ISND modem is not supported from the Telecom Italia
