e.g. be Ether-S-Bus. How can I realize a gateway from BACnet to LON with PCD systems? The currently only solution is the realisation with two systems, which could e.g. be connected with Ether-S-Bus [...] BACnet support, but also for Ether-S-Bus, HTTP, FTP, Modbus/IP and many more protocols used by Saia PCD® systems. Highly recommended by Saia Burgess TCS! Details and Download at www [...] Communication / BACnet On a PCD3.M6860 it’s possible to
_Address_of_Panel (no login required). Using this interface it is possible: - Configure S-Bus connections for PCD systems which do not support http direct connections - Configure WebConnect as "proxy server" for [...] happen that the web-pages showed on the microbrowser of the PCD7.D5xxxTL Geode CE panel is frozen after some time. The values are no more update and it’s no more possible to make something [...] ! S-Web Editor 5.14.27 dependencies (FAQ #101273) Since the S-Web Editor version 5.13.00 many new functionalities have
_Address_of_Panel (no login required). Using this interface it is possible: - Configure S-Bus connections for PCD systems which do not support http direct connections - Configure WebConnect as "proxy server" for [...] happen that the web-pages showed on the microbrowser of the PCD7.D5xxxTL Geode CE panel is frozen after some time. The values are no more update and it’s no more possible to make something [...] ! S-Web Editor 5.14.27 dependencies (FAQ #101273) Since the S-Web Editor version 5.13.00 many new functionalities have
PCD» is no longer displayed if the firmware is older than version 1.22.xx or if no S-Bus address is defined Updating Fbox now works even if the Fbox version is less than 1 [...] now working in HTML On the HTML5 browser, it’s possible to display HDLog BACnet trend curbs. Alarm texts are now displayed on HTML5 Elements of drop down list don’t show anymore [...] onboard flash Project backups with S-Net files Device Configurator IRM Min Max scale in device configurator can now be changed Device Configurator does no more return an error
PCD» is no longer displayed if the firmware is older than version 1.22.xx or if no S-Bus address is defined Updating Fbox now works even if the Fbox version is less than 1 [...] now working in HTML On the HTML5 browser, it’s possible to display HDLog BACnet trend curbs. Alarm texts are now displayed on HTML5 Elements of drop down list don’t show anymore [...] onboard flash Project backups with S-Net files Device Configurator IRM Min Max scale in device configurator can now be changed Device Configurator does no more return an error
PCD» is no longer displayed if the firmware is older than version 1.22.xx or if no S-Bus address is defined Updating Fbox now works even if the Fbox version is less than 1 [...] now working in HTML On the HTML5 browser, it’s possible to display HDLog BACnet trend curbs. Alarm texts are now displayed on HTML5 Elements of drop down list don’t show anymore [...] onboard flash Project backups with S-Net files Device Configurator IRM Min Max scale in device configurator can now be changed Device Configurator does no more return an error
the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the PCD internal power supply V+ was at 24V On the ‘new’ ‘Power-PCD’s’ the V+ is 16,5V The electrical design of the PCD2/3.W220Z18 was done in that the way, that the internal power V+ of 24V was required
the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the PCD internal power supply V+ was at 24V On the ‘new’ ‘Power-PCD’s’ the V+ is 16,5V The electrical design of the PCD2/3.W220Z18 was done in that the way, that the internal power V+ of 24V was required
measured PT100 temperature values of the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the PCD internal power supply V+ was at 24V On the ‘new’ ‘Power-PCD’s’ and the PCD2.C1000 and PCD2.C2000 the V+ is 16,5V The electrical design of the PCD2/3.W220Z18 was done in that the
measured PT100 temperature values of the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the PCD internal power supply V+ was at 24V On the ‘new’ ‘Power-PCD’s’ and the PCD2.C1000 and PCD2.C2000 the V+ is 16,5V The electrical design of the PCD2/3.W220Z18 was done in that the
