Product Index PCD7 Fxxx: Comm modules F18x: MP Bus (A) General [...] PCD7.F1xxS Serial interface modules Documentation Good to know The PCD7.F1xxS modules with hardware version A can not be used on non Saia PCD® COSinus systems (PCD1.M1xx, PCD2.M1xx, PCS1), see FAQ 101743 . The PCD7.F1xx modules will be replaced by the fully compatible PCD7.F1xxS modules (fully
. The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295 . The CAN FBox library version $2.6.102 can also be used for PCD2.M5540. The [...] unless the PCD is connected over a VPN connection only (because even with the password protection of S-Bus will still allow everyone to modify media values as e.g. Register Values [...] Serial-S-Bus can be "grouped by function" in the FBox selector window of PG5 2.0.200. The Energy meter with Serial-S-Bus FBox library version 2.5.171 contains a new SASI FBox explained in FAQ
. The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295 . The CAN FBox library version $2.6.102 can also be used for PCD2.M5540. The [...] unless the PCD is connected over a VPN connection only (because even with the password protection of S-Bus will still allow everyone to modify media values as e.g. Register Values [...] Serial-S-Bus can be "grouped by function" in the FBox selector window of PG5 2.0.200. The Energy meter with Serial-S-Bus FBox library version 2.5.171 contains a new SASI FBox explained in FAQ
. The Modbus FBox library version 2.6.220 can be addressed with the S-Bus address, see FAQ 101295 . The CAN FBox library version $2.6.102 can also be used for PCD2.M5540. The [...] unless the PCD is connected over a VPN connection only (because even with the password protection of S-Bus will still allow everyone to modify media values as e.g. Register Values [...] Serial-S-Bus can be "grouped by function" in the FBox selector window of PG5 2.0.200. The Energy meter with Serial-S-Bus FBox library version 2.5.171 contains a new SASI FBox explained in FAQ
PQA - Saia PCD® Power Quality Analyser Power Quality Analyser (PQA) with RS-485 interface LCD 128 x 64 monochrome 1.9" LED for I/O and status supply 110…230 VAC 50/60 Hz measuring inputs 3PH+N up to 270 VAC 1 digital input 24 VDC, high active 1 digital output 5…24 VDC 2 relay normally open 230 VAC, 6 A (resistive load) 1 analogue input for Pt/Ni 1000 sensor 1 interface RS-485 (S-Bus/Modbus) with galvanic isolation
for USB, Profi-S-Bus, Profi-S-IO, Multiple S-Bus PGU: version 020 When using the Ethernet Module PCD7.F650: The minimum firmware version for the Ethernet Module is $0H, recommended 010 or later [...] PCD2 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could
Please note that PCD7.R400 modules delivered after April 2010 require the PCD2.M480 firmware version 1.08.53 or later Minimum firmware version for USB, Profi-S-Bus, Profi-S-IO, Multiple S-Bus PGU [...] PCD2 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could
deploying the new program (download changed blocks in run is not yet possible). On the PCD3.M6860, both Ethernet ports are active at the same time (and also active for the Ether S-Bus communication, if activated on the device configurator) regardless of the channel number. The same behavior does also apply for the S-Bus communication F-Boxes, means that the channel defined in the master/slave F [...] AcknowledgeAlarm service requests, which use complete wildcards as timestamps. Main corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus
deploying the new program (download changed blocks in run is not yet possible). On the PCD3.M6860, both Ethernet ports are active at the same time (and also active for the Ether S-Bus communication, if activated on the device configurator) regardless of the channel number. The same behavior does also apply for the S-Bus communication F-Boxes, means that the channel defined in the master/slave F [...] AcknowledgeAlarm service requests, which use complete wildcards as timestamps. Main corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus
AcknowledgeAlarm service requests, which use complete wildcards as timestamps. Main corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus telegram is incorrect and not accepted from S-Bus recipient. (Since FW 1.28.20) All PCD’s: Not all bytes are transmitted when working with MC4 or MC5 mode on F2xxx module All PCD’s: RS485 driver keep [...] PCD’s: Profibus communcation using onboard FDL port. The FCS test for SD2 telegram was not implemented correctly. All PCD’s: When S-Bus IP Nodelist is used it’s possible that the communication using
