Your search returned 639 results

171. EIB/KNX

     Relevance:

      

     3%

     for EIB/KNX are automatically installed with PG5 2.0 but need to be licensed. As EIB is a slow bus (9600 Bit/s), about 200 to 300 points per connected gateway/EIB line can be handled by a PCD [...] can be programmed, it is possible to listen the bus and to control actuators. To get the actual state of network participants, the PCD can poll them at startup. Quite often PCD's are used as a gateway [...] 101119§ No communication on the EIB Bus and the 'Collision' warning is set to 1 on the FBox! (FAQ #101093) If the cycle time

172. Easy Templating

     Relevance:

      

     6%

     following video describes the changes introduced in S-Bus Easy Templates Version 1.3. The video is available in English and German. Modules required to use easy templating

173. Easy Templating

     Relevance:

      

     6%

     following video describes the changes introduced in S-Bus Easy Templates Version 1.3. The video is available in English and German. Modules required to use easy templating

174. Energy Meter

     Relevance:

      

     9%

     0-Interf. 1-ph. S-Bus Interf. 3-ph. S-Bus Interf [...] . How to configure the S-Bus address on a ALE3? (FAQ #101476) The S-Bus address of an ALE3 with Serial-S-Bus interface can be configured by the following procedure. Setting the S-Bus address Navigate to the "Tariff 1 total" (the blue bar must be right below "T1total"; it can be moved with the "arrow

175. Energy meter with Serial-S-Bus interface (ALD1, ALE3, AWD3), version 2.5.171

     Relevance:

      

     14%

176. Error LED is on after SASI S-BUS Master IP is implemented. Error Message in History: IP Fail Sasi DBX

     Relevance:

      

     29%

     If there is only one CPU in the project you are not able to asign a SASI S-BUS Master IP.

177. Ether S-Bus communication is no more working after the update to PG5 2.1.210

     Relevance:

      

     29%

     After a PG5 Update to the version PG5 2.1.210, the Ether S-Bus Communication is no more working. The S-Bus client and server functionality is disabled in the Device Configurator.

178. Ether-S-Bus communication does not work if two addresses are assigned to the same Ethernet card

     Relevance:

      

     14%

     In case that two IP addresses are assigned to the same Ethernet card (Ethernet port) on a PC, it is possible that the communication does only work on one of the two IP addresses. This problem is cause

179. Example for Ether-S-Bus communication ¦ Level: easy

     Relevance:

      

     14%

     including basic IP explications. File contains several projects, please unzip the file before importing into PG5. PG5 version 2.0.150

180. Exxx-xx0

     Relevance:

      

     11%

     -Line PCD1 / E-Line Why the RS-485 S-Bus communication [...] the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind a