won't have any effect. SComm Driver Update 1.4.321 for running PG5 V 1.4.300 on Win7/8 32 Bit and 64 Bit systems This SComm Driver Update will update the USB driver and the S-Bus driver [...] firmware. Solution At the moment the dynamic space has to be defined >=1000 and Timeout -> TS-Delay -> TN-Delay -> Break length ) If you want to disable the "Secure S-Bus Data mode" If you [...] ) Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several
won't have any effect. SComm Driver Update 1.4.321 for running PG5 V 1.4.300 on Win7/8 32 Bit and 64 Bit systems This SComm Driver Update will update the USB driver and the S-Bus driver [...] firmware. Solution At the moment the dynamic space has to be defined >=1000 and Timeout -> TS-Delay -> TN-Delay -> Break length ) If you want to disable the "Secure S-Bus Data mode" If you [...] ) Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several
won't have any effect. SComm Driver Update 1.4.321 for running PG5 V 1.4.300 on Win7/8 32 Bit and 64 Bit systems This SComm Driver Update will update the USB driver and the S-Bus driver [...] firmware. Solution At the moment the dynamic space has to be defined >=1000 and Timeout -> TS-Delay -> TN-Delay -> Break length ) If you want to disable the "Secure S-Bus Data mode" If you [...] ) Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several
For analyzing Ether-S-Bus communication or Ethernet communication in general, we recommend using the free software Wireshark.
The PCD3.M3xxx, PCD3.M5xxx and PCD3.M6xxx do feature different possibilities for using the port 10 (D-Sub connector) and port 2 (terminal block).
If the MB VGA panel is connected over serial line (RS232 or RS485) to a PCD and the baud rate is set to 9'600 Bit/s (or even less), the timeout on the MB VGA panel is to be adjusted to 500 ms.
Since the Profi-S-Bus protocol is multi-master capable, the question about the amount of possible masters/slaves per station comes up.
Newer intelligent terminals PCD7.D7xx do support Profi-S-Bus communication. This FAQ contains a document that describes the wiring for this communication.
. Why does the FBox "SASI S-Bus Extended" not work (for assigning a gateway master port)? (FAQ #101399) There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on Saia PCD® COSinus systems [...] unassigned. This is the case if there is a falling and later on a rising edge on the input "Sasi" of the FBox "SASI S-Bus extended". On the second attempt to assing the port as gateway master port the FBox
On the CPU PCD2.M480 can be plugged two PCD7.F655 Ethernet cards. This feature allows you to program either Ethernet redundancy by creating an reduced "IP Firewall" or to realise an Ether-S-Bus to Ether-S-Bus gateway.
