supply voltage pins 1L/2L and 3N/4N are inverted. This wrong label is present on the schema of the housing and directly on the pins. Problem When a PCD7.T162 produced before week 22 of 2011 (30.05.2011) has a 24V DC supply voltage it does not work when it is connected like described in the schema on the housing. Solution The pins 1L/2L and 3N/4N are printed inversely. This means that the functionality is still the same but the 24V DC need to be connected to the pins 3N/4N and the 0V to 1L/2L. Remark Units of PCD7.T162 produced after 11/22 (30.05.2011) are correctly labelled and
inputs. To fill this gap we offer interrupt inputs and dedicated I/O modules. For OEM applications we can offer attractive customized solutions. Interrupt inputs on PCD2.M120 , PCD2.M150 , PCD2.M170 , PCD4.M170 (1kHz unidirectional max.) Counter modules PCD2.H100 (simple, 20kHz max.), PCD2.H110 (versatile, 100kHz max.), PCD4.H120 (versatile, 166kHz max.) SSI module PCD2.H150 Interrupt inputs on PCD2.M157 , PCD2.M177 (5kHz bidirectional or unidirectional max.) Counter modules PCD2.H100 (simple, 20kHz max.), PCD2.H110 (versatile, 100
. Why the Modbus communication over Ethernet between a Saia PCD and a Siemens S7-314C-2 does not work correctly? (FAQ #101973) Situation: The PCD is configured as Modbus client with the Saia-Modbus client F-Boxes and you have to communicate over Ethernet with a Siemens S7-314C-2 with the Modbus protocol. Randomly, some read or [...] use the card PCD3.F281, it is recommanded to install the library Belimo 2.5.301 or a later version. You can find these libraries on the support site. The path is: Software -> PG5 -> FBox libraries
Building Automation and Control Network BACnet/IP support for PCD1.M2, PCD2.M5 or PCD3 systems can be added by mounting a BACnet module PCD7.R56x (or PCD3.R56x). This module contains a firmware [...] modules PCD2.F2610 (for PCD1.M2 and PCD2.M5) or the PCD3.F261 (for PCD3.M and PCD3.T666) allow a direct connection to the DALI bus as DALI master, programmed with FBoxes. With one module up to 64 ballasts [...] library is provided together with PG5 Controls Suite. As KNX/EIB is a slow bus, about 200 to 300 points per connected gateway/KNX (EIB) line can be handled by a PCD. A full RS 232 or an Ethernet port
When more than 1 displays of the same type (PCD7.D23x and PCD7.D290) are connected to a RS 485 port (Bus terminal) of a PCDx.F2xx module, the communication doesn't work. Only one of the displays is available, the other one(s) is (are) not accessible!
. Why the Modbus communication over Ethernet between a Saia PCD and a Siemens S7-314C-2 does not work correctly? (FAQ #101973) Situation: The PCD is configured as Modbus client with the Saia-Modbus client F-Boxes and you have to communicate over Ethernet with a Siemens S7-314C-2 with the Modbus protocol. Randomly, some read or [...] use the card PCD3.F281, it is recommanded to install the library Belimo 2.5.301 or a later version. You can find these libraries on the support site. The path is: Software -> PG5 -> FBox libraries
. Why the Modbus communication over Ethernet between a Saia PCD and a Siemens S7-314C-2 does not work correctly? (FAQ #101973) Situation: The PCD is configured as Modbus client with the Saia-Modbus client F-Boxes and you have to communicate over Ethernet with a Siemens S7-314C-2 with the Modbus protocol. Randomly, some read or [...] use the card PCD3.F281, it is recommanded to install the library Belimo 2.5.301 or a later version. You can find these libraries on the support site. The path is: Software -> PG5 -> FBox libraries
. Why the Modbus communication over Ethernet between a Saia PCD and a Siemens S7-314C-2 does not work correctly? (FAQ #101973) Situation: The PCD is configured as Modbus client with the Saia-Modbus client F-Boxes and you have to communicate over Ethernet with a Siemens S7-314C-2 with the Modbus protocol. Randomly, some read or [...] use the card PCD3.F281, it is recommanded to install the library Belimo 2.5.301 or a later version. You can find these libraries on the support site. The path is: Software -> PG5 -> FBox libraries
. Why the Modbus communication over Ethernet between a Saia PCD and a Siemens S7-314C-2 does not work correctly? (FAQ #101973) Situation: The PCD is configured as Modbus client with the Saia-Modbus client F-Boxes and you have to communicate over Ethernet with a Siemens S7-314C-2 with the Modbus protocol. Randomly, some read or [...] use the card PCD3.F281, it is recommanded to install the library Belimo 2.5.301 or a later version. You can find these libraries on the support site. The path is: Software -> PG5 -> FBox libraries
space Communication interfaces are directly mounted onto the main print of a CPU and therefore do not require additional space. A PCD2.M480 may handle up to 8 serial interfaces [...] Server Newer classic PCD types (introduced after 2000, e.g. PCD2.M170, PCD2.M480, PCD3.Mxxxx, PCS1) do have an integrated Web Server (no extra costs) in the Firmware (FW). To access the Web server the software Web Connect is needed and to generate project containing a PCD internal Web server the Web Builder is required. Both tools are part of the Controls Suite. S-Bus as communication
