43
saia-pcd.com
PCD
3
SAIA BURGESS CONTROLS
PCD7.R-SD512
Automation stations – Saia PCD3
5
Switch cabinet
components
4
Consumer
data acquisition
3
Dedicated
room controllers
2
Operation
and monitoring
1
Automation
stations
Performance overview, ordering information and accessories
Order type
PCD3.M2330A4T1
with PSTN modem
PCD3.M2330A4T3
with ISDN modem
PCD3.M2330A4T5
with GSM/GPRS modem (without antenna)
PCD3.M2230A4T5
with GSM/GPRS modem, without Ethernet (without antenna)
Processor technology
RAM as program memory
512 kByte
Backup memory (flash)
512 kByte
Memory for file system (flash)
1 MB (onboard)
PCD media
8192 flags, 16,384 × 32-bit register
Additional data storage
Slot for SD flash cards
SBC SD card with up to 1 GB file system
Data files up to 900 files with file system Download and upload via ftp
PCD7.R-SD512
SBC SD flash card, 512 MB with file system
PCD7.R-SD1024
SBC SD flash card, 1024 MB with file system
Internet and Intranet protocols
HTTP server
Visualisation with web browser and web panel
FTP Server
Easy data exchange
TCP/IP-PPP point-to-point protocol
Efficient communication
SMTP client
Sending emails with files (e.g. log files) as attachments
DHCP and DNS client
Easy integration in IP networks
SNTP client
Synchronisation of the internal clock
SNMP agent
Network management
Telecom communication interface (alternatively integrated interfaces)
GSM / GPRS / PSTN / ISDN / SMS – sending and receiving
Communication interfaces for slot A
PCD7.F110S
RS-422 with RTS/CTS or RS-485 electrically connected, with line termination resistors that can be
activated. Suitable for Modbus, S-Bus, EnOcean, etc.
PCD7.F121S
RS-232 with RTS/CTS, DTR/DSR, DCD, suitable for modem, EIB, DALI connection.
PCD7.F150S
RS-485 (electrically isolated), with line termination resistors that can be activated
PCD7.F180S
Belimo® MP-Bus, for connecting up to 8 drives on one line
Field level protocols
Serial S-Bus, Ether S-Bus and Profi S-Bus
MODBUS RTU or TCP EIB M-Bus IEC 870-5-101/103/104
For other protocols please refer to Chapter B2
I/O expansions
PCD3.C110Z09 2 module slots (connection with PCD3.K010 connector or with
PCD3.K106/K116 cable)
0 mA
PCD3.C200Z09
4 module slots, with 24 VDC supply (connection with PCD3.K010
connector or with PCD3.K106/K116 cable)
1500 mA / 200 mA
(5 V / +V)
PCD3.C110
2 module slots (connection with PCD3.K106/K116 cable only)
0 mA
PCD3.C200
4 module slots, with 24 VDC supply
(connection with PCD3.K106/K116 cable only)
1500 mA / 200 mA
(5 V / +V)
I/O modules see pages 27 and 28
