unless the PCD is connected over a VPN connection only (because even with the password protection of S-Bus will still allow everyone to modify media values as e.g. Register Values [...] communication features" (Web Server, Ether-S-Bus, SMTP etc.), it suggests itself to connect it to the Internet using e.g. an (A)DSL router. This FAQ is aimed to explain some key-points to be considered for [...] direct (for accessing the Web Server of the PCD, don't forget the password protection of the Web Server) Ether-S-Bus (not recommended unless you are using a secure VPN connection) - for programming the
standard RS 485-Port for S-Bus, to add a Bus-Terminal etc. The wiring is: D-Sub S-Net MPI S-Bus / Terminal ... Pin 3 RxD/TxD-P --------------------- /TX /RX 5 [...] only supported by the PCD4 and PCD6 Reason The reason is, that the "IO Bus Quit fail" is a hardware interrupt created by the PCD4 and PCD6 I/O modules. On the PCD3 and also PCD2 I [...] . Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port (FAQ #100500) Yes, it is
standard RS 485-Port for S-Bus, to add a Bus-Terminal etc. The wiring is: D-Sub S-Net MPI S-Bus / Terminal ... Pin 3 RxD/TxD-P --------------------- /TX /RX 5 [...] only supported by the PCD4 and PCD6 Reason The reason is, that the "IO Bus Quit fail" is a hardware interrupt created by the PCD4 and PCD6 I/O modules. On the PCD3 and also PCD2 I [...] . Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port (FAQ #100500) Yes, it is
standard RS 485-Port for S-Bus, to add a Bus-Terminal etc. The wiring is: D-Sub S-Net MPI S-Bus / Terminal ... Pin 3 RxD/TxD-P --------------------- /TX /RX 5 [...] only supported by the PCD4 and PCD6 Reason The reason is, that the "IO Bus Quit fail" is a hardware interrupt created by the PCD4 and PCD6 I/O modules. On the PCD3 and also PCD2 I [...] . Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port (FAQ #100500) Yes, it is
standard RS 485-Port for S-Bus, to add a Bus-Terminal etc. The wiring is: D-Sub S-Net MPI S-Bus / Terminal ... Pin 3 RxD/TxD-P --------------------- /TX /RX 5 [...] only supported by the PCD4 and PCD6 Reason The reason is, that the "IO Bus Quit fail" is a hardware interrupt created by the PCD4 and PCD6 I/O modules. On the PCD3 and also PCD2 I [...] . Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port (FAQ #100500) Yes, it is
standard RS 485-Port for S-Bus, to add a Bus-Terminal etc. The wiring is: D-Sub S-Net MPI S-Bus / Terminal ... Pin 3 RxD/TxD-P --------------------- /TX /RX 5 [...] only supported by the PCD4 and PCD6 Reason The reason is, that the "IO Bus Quit fail" is a hardware interrupt created by the PCD4 and PCD6 I/O modules. On the PCD3 and also PCD2 I [...] . Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port (FAQ #100500) Yes, it is
standard RS 485-Port for S-Bus, to add a Bus-Terminal etc. The wiring is: D-Sub S-Net MPI S-Bus / Terminal ... Pin 3 RxD/TxD-P --------------------- /TX /RX 5 [...] only supported by the PCD4 and PCD6 Reason The reason is, that the "IO Bus Quit fail" is a hardware interrupt created by the PCD4 and PCD6 I/O modules. On the PCD3 and also PCD2 I [...] . Can the S-Net MPI-Port on the PCD3.M5xx0 and on the PCD2.M5xx0 be used as standard RS-485 Port (FAQ #100500) Yes, it is
about 700MB of free space on your hard disk. Products not supported by PG5 2.3 The following products and protocols are not supported by PG5 2.3: PCD4 and PCD6 S-Bus RIO (used with PCD [...] who will be able to download a new project or update an existing project on site. The tool does perform an automatic reboot of the PCD’s and programmable MB-Panels after the loading of the file. PG5 2.3.162, Web-Editor8: Referenced variables aren't available in variable selection dialogs before manually refreshing the variable table(s). In case of a new project, this even prevents the
about 700MB of free space on your hard disk. Products not supported by PG5 2.3 The following products and protocols are not supported by PG5 2.3: PCD4 and PCD6 S-Bus RIO (used with PCD [...] who will be able to download a new project or update an existing project on site. The tool does perform an automatic reboot of the PCD’s and programmable MB-Panels after the loading of the file. PG5 2.3.162, Web-Editor8: Referenced variables aren't available in variable selection dialogs before manually refreshing the variable table(s). In case of a new project, this even prevents the
about 700MB of free space on your hard disk. Products not supported by PG5 2.3 The following products and protocols are not supported by PG5 2.3: PCD4 and PCD6 S-Bus RIO (used with PCD [...] who will be able to download a new project or update an existing project on site. The tool does perform an automatic reboot of the PCD’s and programmable MB-Panels after the loading of the file. PG5 2.3.162, Web-Editor8: Referenced variables aren't available in variable selection dialogs before manually refreshing the variable table(s). In case of a new project, this even prevents the
