. PCD2 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
F1. PCD2 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
2.F540). PCD2 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
2.F540). PCD2 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
. PCD1 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
unless the PCD is connected over a VPN connection only (because even with the password protection of S-Bus will still allow everyone to modify media values as e.g. Register Values [...] communication features" (Web Server, Ether-S-Bus, SMTP etc.), it suggests itself to connect it to the Internet using e.g. an (A)DSL router. This FAQ is aimed to explain some key-points to be considered for [...] direct (for accessing the Web Server of the PCD, don't forget the password protection of the Web Server) Ether-S-Bus (not recommended unless you are using a secure VPN connection) - for programming the
value of the: - S-Bus station - IP node or - IP address Version 2.6.200 FBox "Define Unit Client" (Direct/Indirect): - Added option "Offset 1->0" Version [...] "). Can I stop Wireshark based on a specific condition (e.g. Ether-S-Bus communication has stopped)? (FAQ #100840) It is possible capturing the traffic on a Ethernet network and stop this capture based on a specific condition, like e.g. the lack of Ether-S-Bus telegrams from a specific station for a certain time. However, this
des SBC S-Bus kompatibel. Symptom Bei Neu-Inbetriebnahme von Romutec S-Bus Kopplern SBZK1000 oder nach Update der PCD-Firmware funktioniert die Kommunikation zwischen Saia PCD®/PCS und Romutec Koppler nicht (mehr). Ursache Der neue Secure Data Mode (SData-Mode) des S-Bus wird zur Zeit von Romutec nicht unterstützt. S-Bus Telegramme im SData-Mode führen zur Fehlfunktion [...] verwendet werden, solange Romutec den SData-Mode nicht unterstützt. Stattdessen wird die manuelle Einstellung des normalen S-Bus Data-Mode im SBZK1000 empfohlen. Details zur Einstellung des SBZK finden Sie in
Product Category Programmable controller PCD3: CPUs, cassette design Fxxx: Comm modules F2xx: for I/O slot 0..3 F281: MP Bus General FAQ [...] ..3 Documentation Firmware used in production Good to know A PCD2.F21x0, F22x0 and F28x0 module can be equipped with one additional PCD7.F1xx(S) module. The PCD2.F2xxx modules
Product Category Programmable controller PCD2: CPUs, flat design Fxx: Comm modules F281x: MP Bus General FAQ [...] ..3 Documentation Firmware used in production Good to know A PCD2.F21x0, F22x0 and F28x0 module can be equipped with one additional PCD7.F1xx(S) module. The PCD2.F2xxx modules
