-protocols are disabled by default on the deivce configurator of new PG5 projects: - S-Bus over TCP/IP - FTP - HTTP (Web-Server) PG5 projects made with precedent version of PG5 2.1 are upward compatible [...] the S-Bus settings on the PCS1 when PG5 2.1.420 is used. To solve the problem please check the following FAQ 101963 . Warning ' Licensed to: NOT REGISTERED' is shown if a program is [...] . Products not supported by PG5 2.1 The following products and protocols are not supported by PG5 2.1: PCD4 and PCD6 S-Bus RIO (used with PCD1.T240) Profibus FMS For existing projects which
: Why isn't it possible to write to a PCD resource from a MB VGA panel (with S-Bus)? (FAQ #101123) If a S-Bus [...] VGA panel). Symptom If the connection between the PCD3 or a PCD2.M5xx0 (with firmware 1.09.38 or newer) and the MB VGA panel is realized with S-Bus (Serial S-Bus over RS232/RS485 or Ether S-Bus) and if the MB VGA panel (PCD7.D457Vxxx and PCD7.D410Vxxx) has installed the firmware (FW) 1.01.00 (or older) then it isn't possible writing a PCD variable from the MB VGA panel (edit box or
about 700MB of free space on your hard disk. Products not supported by PG5 2.3 The following products and protocols are not supported by PG5 2.3: PCD4 and PCD6 S-Bus RIO (used with PCD [...] who will be able to download a new project or update an existing project on site. The tool does perform an automatic reboot of the PCD’s and programmable MB-Panels after the loading of the file. PG5 2.3.162, Web-Editor8: Referenced variables aren't available in variable selection dialogs before manually refreshing the variable table(s). In case of a new project, this even prevents the
about 700MB of free space on your hard disk. Products not supported by PG5 2.3 The following products and protocols are not supported by PG5 2.3: PCD4 and PCD6 S-Bus RIO (used with PCD [...] who will be able to download a new project or update an existing project on site. The tool does perform an automatic reboot of the PCD’s and programmable MB-Panels after the loading of the file. PG5 2.3.162, Web-Editor8: Referenced variables aren't available in variable selection dialogs before manually refreshing the variable table(s). In case of a new project, this even prevents the
protected, hidden or that the creation date of the files has been newer than the one contained in the patch. Solution In order to solve this issue, please install the S-Bus Communication library 2.6.150 or later (this will install the library again including all the files in the language dependant sub folders). The S-Bus communication library can be downloaded from the support page in the section [...] Guidelines for programming S-Bus communication (FAQ #100537) In order to achieve a high and constant data throughput with S-Bus
protected, hidden or that the creation date of the files has been newer than the one contained in the patch. Solution In order to solve this issue, please install the S-Bus Communication library 2.6.150 or later (this will install the library again including all the files in the language dependant sub folders). The S-Bus communication library can be downloaded from the support page in the section [...] Guidelines for programming S-Bus communication (FAQ #100537) In order to achieve a high and constant data throughput with S-Bus
protected, hidden or that the creation date of the files has been newer than the one contained in the patch. Solution In order to solve this issue, please install the S-Bus Communication library 2.6.150 or later (this will install the library again including all the files in the language dependant sub folders). The S-Bus communication library can be downloaded from the support page in the section [...] Guidelines for programming S-Bus communication (FAQ #100537) In order to achieve a high and constant data throughput with S-Bus
transfer from the S-Bus driver to the Ether-S-Bus driver. See the description below Procedure for the conversion of a PCD8.D81W project Open the project and move the SBC S-Bus driver from ASP to MSP. Convert the panel from Vxxx rev 4 to VTxxx ETH. Drag and drop the driver "SBC Ethernet S-Bus" to the Ethernet port. Open the [...] D763 loses communication on Profi S-Bus! (FAQ #100477) On a Profi S-Bus network when PCD7.D76_ terminals are
In principle, it is possible to use RS422 as physical layer for Serial-S-Bus communication. But note that the S-Bus full protocol is not fully applicatively due to the reason described below!
