). However, it is important to know that only one S-Bus client can access the S-Web Server over Ether-S-Bus at the same time! Problem By desing the S-Web Server of a PCD can only be accessed by one S-Bus connection per physical port (Serial-S-Bus, Profi-S-Bus, Ether-S-Bus). As result it is possible to access the S-Web Server over Serial-S-Bus and in parallel over Ether-S-Bus, but it is [...] . PCD1 / _Firmware Classic Why the RS-485 S-Bus
). However, it is important to know that only one S-Bus client can access the S-Web Server over Ether-S-Bus at the same time! Problem By desing the S-Web Server of a PCD can only be accessed by one S-Bus connection per physical port (Serial-S-Bus, Profi-S-Bus, Ether-S-Bus). As result it is possible to access the S-Web Server over Serial-S-Bus and in parallel over Ether-S-Bus, but it is [...] . PCD1 / _Firmware Classic Why the RS-485 S-Bus
). However, it is important to know that only one S-Bus client can access the S-Web Server over Ether-S-Bus at the same time! Problem By desing the S-Web Server of a PCD can only be accessed by one S-Bus connection per physical port (Serial-S-Bus, Profi-S-Bus, Ether-S-Bus). As result it is possible to access the S-Web Server over Serial-S-Bus and in parallel over Ether-S-Bus, but it is [...] . PCD1 / _Firmware Classic Why the RS-485 S-Bus
). However, it is important to know that only one S-Bus client can access the S-Web Server over Ether-S-Bus at the same time! Problem By desing the S-Web Server of a PCD can only be accessed by one S-Bus connection per physical port (Serial-S-Bus, Profi-S-Bus, Ether-S-Bus). As result it is possible to access the S-Web Server over Serial-S-Bus and in parallel over Ether-S-Bus, but it is [...] . PCD1 / _Firmware Classic Why the RS-485 S-Bus
). However, it is important to know that only one S-Bus client can access the S-Web Server over Ether-S-Bus at the same time! Problem By desing the S-Web Server of a PCD can only be accessed by one S-Bus connection per physical port (Serial-S-Bus, Profi-S-Bus, Ether-S-Bus). As result it is possible to access the S-Web Server over Serial-S-Bus and in parallel over Ether-S-Bus, but it is [...] . PCD1 / _Firmware Classic Why the RS-485 S-Bus
). However, it is important to know that only one S-Bus client can access the S-Web Server over Ether-S-Bus at the same time! Problem By desing the S-Web Server of a PCD can only be accessed by one S-Bus connection per physical port (Serial-S-Bus, Profi-S-Bus, Ether-S-Bus). As result it is possible to access the S-Web Server over Serial-S-Bus and in parallel over Ether-S-Bus, but it is [...] . PCD1 / _Firmware Classic Why the RS-485 S-Bus
software Web Connect is needed and to generate project containing a PCD internal Web server the Web Builder is required. Both tools are part of the Controls Suite. S-Bus as communication protocol The SBC S-Bus is an integral component of the Firmware. Many other protocols are supported through special drivers (e.g. FBoxes). Communication modules do not require additional [...] addresses by its physical location All I/Os are addressed statically on the internal I/O bus. Therefore the addresses of mounted I/O modules is depending on its physical location. Each module has a I
corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus telegram is incorrect and not accepted from S-Bus recipient. (Since FW 1.28.20) All PCD’s: Not [...] implemented correctly. All PCD’s: When S-Bus IP Nodelist is used it’s possible that the communication using nodes does no more work after execute a download in run All PCD’s: XOB parameter as Registers [...] Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus telegram is incorrect and not accepted from S-Bus recipient. (Since FW 1.28.20) All PCD’s: Not [...] implemented correctly. All PCD’s: When S-Bus IP Nodelist is used it’s possible that the communication using nodes does no more work after execute a download in run All PCD’s: XOB parameter as Registers [...] Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus telegram is incorrect and not accepted from S-Bus recipient. (Since FW 1.28.20) All PCD’s: Not [...] implemented correctly. All PCD’s: When S-Bus IP Nodelist is used it’s possible that the communication using nodes does no more work after execute a download in run All PCD’s: XOB parameter as Registers [...] Why the RS-485 S-Bus communication between the PCD master and the slave does fail sometime, if FW 1.28.20…1.28.33 is used? (FAQ #102026)
