Product Category Configurable room controller PCD7.L6xx: S-Bus/LON Room Controller PCD7.L60x-1: Room Controller S-Bus [...] -100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
-100.0 Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812) L60x Config, L60x Room [...] with use of the PCD7.L60x S-Bus room controllers (not LON [...] sensor to the input E2 (and select in the config FBox its functionality as dew point): If the dew point has to be set over the S-Bus or in the "Room" FBox, then it has to be used in minimum the
controller as S-Bus master, not read/write datas (inputs and outputs) from S-Bus slave devices via S-Bus? (FAQ #102029) The PCD7.LRxx-P5 IRM room controller can be operated on the RS485 interface as an S-Bus master. The PCD7.LRxx-P5 IRM room controller supports all S-Bus telegrams except the 2 telegrams: Read Input Write Output This means that it is not possible with the PCD7.LRxx-P5 IRM room controller, to read from the S-Bus Slave devices directly via S-Bus inputs and to write the
Product Category Remote I/O PCD7.Lxxx S-Bus RIO General FAQ PCD7 Why I have a blue screen after a panel
of the FileZilla window) On the next window do select the option "Enable speed limits" and do set the values to 100/20 KiB/s [...] is no longer present with hardware version C34 5 of the PCD2.M5xxx (the according filter of the I/O bus has been adapted in order not to lead to this conflict). In case it is not possible to
! PCD7.D761 / D763 loses communication on Profi S-Bus! (FAQ #100477) On a Profi S-Bus network when PCD7.D76_ terminals [...] ! How to convert variables from S-Bus to Ether S-Bus driver when changing terminal type? (FAQ #100461) It is possible to convert all the variable from a S-Bus driver to Ether S-Bus driver if an existing project has to be used on another terminal type (e.g. PCD7.D786 convert to PCD7.D786ET)! Hereby the procedure to
! PCD7.D761 / D763 loses communication on Profi S-Bus! (FAQ #100477) On a Profi S-Bus network when PCD7.D76_ terminals [...] ! How to convert variables from S-Bus to Ether S-Bus driver when changing terminal type? (FAQ #100461) It is possible to convert all the variable from a S-Bus driver to Ether S-Bus driver if an existing project has to be used on another terminal type (e.g. PCD7.D786 convert to PCD7.D786ET)! Hereby the procedure to
Serial S-Bus is still very often in use for it's low costs combined with good communication performance. Unfortunately, nowadays it's quite difficult to buy a notebook PC which still has at least one serial COM port!
