PCD1 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
now accept AcknowledgeAlarm service requests, which use complete wildcards as timestamps. Main corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus telegram is incorrect and not accepted from S-Bus recipient. (Since FW 1.28.20) All PCD’s: Not all bytes are transmitted when working with MC4 or MC5 mode on F2xxx module All PCD’s [...] before with SCOB All PCD’s: Profibus communcation using onboard FDL port. The FCS test for SD2 telegram was not implemented correctly. All PCD’s: When S-Bus IP Nodelist is used it’s possible that the
now accept AcknowledgeAlarm service requests, which use complete wildcards as timestamps. Main corrections All PCD’s: On S-Bus data mode, if S-Bus CRC contains a S-Bus DLE as last character then S-Bus telegram is incorrect and not accepted from S-Bus recipient. (Since FW 1.28.20) All PCD’s: Not all bytes are transmitted when working with MC4 or MC5 mode on F2xxx module All PCD’s [...] before with SCOB All PCD’s: Profibus communcation using onboard FDL port. The FCS test for SD2 telegram was not implemented correctly. All PCD’s: When S-Bus IP Nodelist is used it’s possible that the
-Line PCD1 / E-Line Why the RS-485 S-Bus communication [...] the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind a
three-phase energy meters with S-Bus, M-Bus or Modbus communication. Note also that the format of the serial number has changed for the S-Bus and Modbus (is now ASCII) and due of this it's necessary to [...] Comm. interface Prod.date =1322 S-Bus Register 13 12, 13 Modbus Register 16, 17 16, 17, 18 M-Bus Byte 8, 9, 10, 11 8, 9, 10, 11 [...] . Why is it not possible to communicate over S-Bus with the S-Energy meter (ALD1/ALE3/AWD3)? (FAQ #101591) Due to a
three-phase energy meters with S-Bus, M-Bus or Modbus communication. Note also that the format of the serial number has changed for the S-Bus and Modbus (is now ASCII) and due of this it's necessary to [...] Comm. interface Prod.date =1322 S-Bus Register 13 12, 13 Modbus Register 16, 17 16, 17, 18 M-Bus Byte 8, 9, 10, 11 8, 9, 10, 11 [...] . Why is it not possible to communicate over S-Bus with the S-Energy meter (ALD1/ALE3/AWD3)? (FAQ #101591) Due to a
PCD1 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
PCD1 / _Firmware Classic Why the RS-485 S-Bus [...] possible that the some of the S-Bus telegrams transferred from the PCD S-Bus master to the S-Bus slaves over RS485 are malformed, and the S-Bus slave does reject the request from the master. This could lead to the situation that for example the PCD S-Bus master don’t receive actual values from E-Line RIO’s or that the program download of a PCD program from the PC to a Slave PCD which is located behind
In order to achieve a high and constant data throughput with S-Bus, the following guidelines can be helpful for the programmer of S-Bus communication.
...300 kOhm 4 analog outputs 10 bits, 0...10 V (10 mA max.) 1 interface RS-485 for S-Bus and Modbus, Modbus support since FW 1.08.04 PCD [...] ...10 V, Pt/Ni 1000, NI1000 L&S, NTC, 0...2500 Ohm, 0...7500 Ohm, 0...300 kOhm 8 analog outputs 10 bits, 0...10 V (10 mA max.) 1 interface RS-485 for S-Bus and Modbus, Modbus support since FW 1 [...] interface RS-485 for S-Bus and Modbus, Modbus support since FW 1.08.04 Documentation Web-templates for Web-Editor8 E-Line configuration App The E-Line App does allow to
