for freezing the analog outputs of the PCD3.W800 module so that we can inform you if your application is affected by the problem. This FAQ will be dated as soon as we have new information [...] address 240). On all other slots the modules work correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively [...] : There's an error in allocating the address mapping of the Device Configurator in PG5 2.0.200 (SP2) for this analog card PCD3.W745. Solution: This problem will be solved in PG
for freezing the analog outputs of the PCD3.W800 module so that we can inform you if your application is affected by the problem. This FAQ will be dated as soon as we have new information [...] address 240). On all other slots the modules work correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively [...] : There's an error in allocating the address mapping of the Device Configurator in PG5 2.0.200 (SP2) for this analog card PCD3.W745. Solution: This problem will be solved in PG
” after the function Network –>Test Reason In the FW 1.26.xx there is a problem with the file update on the Flash cards, the bindings are only updates in the memory but the [...] , the range of standard communication interfaces and the expansion options offer good solutions for small to medium installations. Documentation EPLAN product macros, DWG and DXF files [...] properties are not written if many values change simultaneously BACnet: Problem reliability & out of service, reliability is not written when oos is high BACnet: Web CGI commands to read BACnet platform
” after the function Network –>Test Reason In the FW 1.26.xx there is a problem with the file update on the Flash cards, the bindings are only updates in the memory but the [...] , the range of standard communication interfaces and the expansion options offer good solutions for small to medium installations. Documentation EPLAN product macros, DWG and DXF files [...] properties are not written if many values change simultaneously BACnet: Problem reliability & out of service, reliability is not written when oos is high BACnet: Web CGI commands to read BACnet platform
” after the function Network –>Test Reason In the FW 1.26.xx there is a problem with the file update on the Flash cards, the bindings are only updates in the memory but the [...] , the range of standard communication interfaces and the expansion options offer good solutions for small to medium installations. Documentation EPLAN product macros, DWG and DXF files [...] properties are not written if many values change simultaneously BACnet: Problem reliability & out of service, reliability is not written when oos is high BACnet: Web CGI commands to read BACnet platform
” after the function Network –>Test Reason In the FW 1.26.xx there is a problem with the file update on the Flash cards, the bindings are only updates in the memory but the [...] , the range of standard communication interfaces and the expansion options offer good solutions for small to medium installations. Documentation EPLAN product macros, DWG and DXF files [...] properties are not written if many values change simultaneously BACnet: Problem reliability & out of service, reliability is not written when oos is high BACnet: Web CGI commands to read BACnet platform
losses. In case a telegram was lost (due to network problems) the transfer was interrupted by the PCD firmware. Because of the interruption the BACnet firmware was not notified, but it remained in a state [...] . Problem A configuration calculated with the old Excel sheet did not have the same current limitation for the CPUs. The same configuration is maybe rejected by the Device Configurator. Reason The reason is, that the maximal current on the V+ is depending on the charge on the 5V power supply. The Excel sheet did not take care of this dependency. This was leading to problems in very few cases. In the
shown. How to solve the problem? On the wvar file do click with the right mouse key to the concerned variable and select rename. On the next window put the cursor at the end of the [...] correctly - It’s possible that you have Index Register Overflow message in the PCD history Only the PCS1 is concerned from this problem. See the FAQ 101832 for more information and the solution to fix the problem
shown. How to solve the problem? On the wvar file do click with the right mouse key to the concerned variable and select rename. On the next window put the cursor at the end of the [...] Register Overflow message in the PCD history Only the PCS1 is concerned from this problem. See the FAQ 101832 for more information and the solution to fix the problem [...] variable is copied from the Web-Editor8 help file with copy paste in to the Web-editor8 painter, then it’s possible that not only the name of the variable is copied but also an invisible 'CR''LF' character
complete installation package of PG5 2.2.235 and must be installed over PG5 2.2.235 Before installing the patch files, make sure that you have installed PG5 2.2.235 This patch of the PG5 contains important corrections for PG5 2.2.235 and S-Web Editor 8 included in PG5 2.2.235 Installation: For PG5: Unzip of the file and copy the files on the corresponding directories analogous to the directory structure in the zip file c:\Program Files (x86)\SBC\PG5 V2.2.235\ c:\Program Files (x86)\SBC\PG5 V2.2.235\BACnet\Preset\ c:\Program Files (x86)\SBC\PG5 V
