protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD7.F5 [...] xx0 PCD3.Mxxx0 PCD3.Mxx60 PCD3.M6860 PCD3.M6880 PCD3.T665/T666/T666 PCD7.D4xxxT5F pWeb Panel PCD7.D443WT5F pWeb Panel PCD7.D4xxV VGA MB Panel PCD7.D412DTPF SVGA MB Panel PCD
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD7.F5 [...] xx0 PCD3.Mxxx0 PCD3.Mxx60 PCD3.M6860 PCD3.M6880 PCD3.T665/T666/T666 PCD7.D4xxxT5F pWeb Panel PCD7.D443WT5F pWeb Panel PCD7.D4xxV VGA MB Panel PCD7.D412DTPF SVGA MB Panel PCD
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD7.F5 [...] xx0 PCD3.Mxxx0 PCD3.Mxx60 PCD3.M6860 PCD3.M6880 PCD3.T665/T666/T666 PCD7.D4xxxT5F pWeb Panel PCD7.D443WT5F pWeb Panel PCD7.D4xxV VGA MB Panel PCD7.D412DTPF SVGA MB Panel PCD
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
Software / Tools EPLAN product macros, DWG and DXF files can be found here Softwaretool for printing on the Labeling-Strips for PCD3-Modules: Please use the Device Configurator from PG5 [...] firmware needs to be compatible to the PCD firmware. Please refer to the firmware page for a compatible package. Good to know To use PCD3.M3160, PCD3.M3360 or PCD3.M5360, PG5 [...] /calendar templates do not work BACnet: PCD3.M6860 no BACnet communication on ETH2 if router is used BACnet: Rev 4 not working with Name based Client BACnet: Rev14 does not allow high limit value below 5 on
Software / Tools EPLAN product macros, DWG and DXF files can be found here Softwaretool for printing on the Labeling-Strips for PCD3-Modules: Please use the Device Configurator from PG5 [...] firmware needs to be compatible to the PCD firmware. Please refer to the firmware page for a compatible package. Good to know To use PCD3.M3160, PCD3.M3360 or PCD3.M5360, PG5 [...] /calendar templates do not work BACnet: PCD3.M6860 no BACnet communication on ETH2 if router is used BACnet: Rev 4 not working with Name based Client BACnet: Rev14 does not allow high limit value below 5 on
Software / Tools EPLAN product macros, DWG and DXF files can be found here Softwaretool for printing on the Labeling-Strips for PCD3-Modules: Please use the Device Configurator from PG5 [...] firmware needs to be compatible to the PCD firmware. Please refer to the firmware page for a compatible package. Good to know To use PCD3.M3160, PCD3.M3360 or PCD3.M5360, PG5 [...] /calendar templates do not work BACnet: PCD3.M6860 no BACnet communication on ETH2 if router is used BACnet: Rev 4 not working with Name based Client BACnet: Rev14 does not allow high limit value below 5 on
