• PCD3.Fxxx

  • Serial communication modules

Documentation

System Catalogue : PCD3

Extract 26-215_A0120 System Catalogue : PCD3

Chapter:
Automation Stations - PCD3

ENG18c .pdf 4.66 MB Download
FRA18c .pdf 4.67 MB Download
GER18c .pdf 4.69 MB Download
ITA18c .pdf 4.67 MB Download

PCD3.F150 - Serial interf. RS-485 with galv. isolation

Datasheet 31-653 PCD3.F150 - Serial interf. RS-485 with galv. isolation

Serial interface module RS-485 with galvanic isolation
(connector type A included)

ENG04 .pdf 1.04 MB Download
FRA04 .pdf 1.05 MB Download
GER04 .pdf 1.07 MB Download
ITA04 .pdf 1.04 MB Download
SPA04 .pdf 1.04 MB Download

PCD3.F210 - Serial interf. RS-485/422 + 1 socket

Datasheet PP31-655 PCD3.F210 - Serial interf. RS-485/422 + 1 socket

Serial interface module with 1× RS-422 / RS-485
and 1 socket for PCD7.F1xxS module

ENG01 .pdf 0.81 MB Download
FRA01 .pdf 0.81 MB Download
GER01 .pdf 0.81 MB Download
ITA01 .pdf 0.81 MB Download

PCD3.F281 - Belimo MP-Bus module

Datasheet PP31-657 PCD3.F281 - Belimo MP-Bus module

Belimo MP-Bus interface module for up to 8 drives and 1 socket for PCD7.F1xxS module.

PCD3 modules of type PCD3.F281 can be used on each slot "#0…3" of a PCD3 CPU and a PCD3 smart RIO.

ENG01 .pdf 0.81 MB Download
FRA01 .pdf 0.81 MB Download
GER01 .pdf 0.81 MB Download
ITA01 .pdf 0.81 MB Download

PCD3.F1xx & PCD3.F2xx - Communication modules

Manual 26-857 PCD3.F1xx & PCD3.F2xx - Communication modules

ENG07 .pdf 3.78 MB Download
FRA07 .pdf 3.79 MB Download
GER07 .pdf 3.81 MB Download
ITA07 .pdf 3.78 MB Download

Installation Components for RS-485 networks

Manual 26-740 Installation Components for RS-485 networks

DE06 .pdf 2.01 MB Download
EN06 .pdf 3.21 MB Download
FR06 .pdf 3.20 MB Download
IT06 .pdf 3.20 MB Download

PCD3 Hardware

Manual 26-789 PCD3 Hardware

ENG21 .pdf 16.34 MB Download
FRA21 .pdf 15.65 MB Download
GER21 .pdf 17.97 MB Download
ITA21 .pdf 15.28 MB Download

File System and FTP Server

Manual 26-855 File System and FTP Server

ENG08 .pdf 2.25 MB Download
IT07 .pdf 3.35 MB Download

Firmware used in production

PCD3F2xx and PCD2F2xx0

Firmware 1.04.06 PCD3F2xx and PCD2F2xx0

Current official production firmware version of the PCDx.F2xx (0) modules

1.04.06 .blk 0.10 MB Download

ApplicationNote F2xx FirmwareUpdate 2011

Firmware ApplicationNote F2xx FirmwareUpdate 2011

Procedure for updating the firmware of a PCD2.F2xx0 or PCD3.F2xx

EN Archive .pdf 0.07 MB Download

Softwaretool for printing on the Labeling-Strips for PCD3-Modules:S-LabelCreator.htm

Good to know

The minimal PCD3 firmware version for the usage of the PCD3.F281 is 1.10.16.

PCD2 / Fxxx

  • Are the LonWorks devices PCD2.F240, PCD3.F2400 and PCD7.R582 still available? (FAQ #102064)
  • Does the PCD support the MP-Bus light protocol and it’s possible connect up to 16 Belimo devices to one MP-Bus line? (FAQ #102016)
  • It’s possible to connect more than 8 MP-Bus devices on a MP-bus line (F180 or F280/F280 card)? (FAQ #102015)
  • Why the configuration of the DALI devices over PCD2.F2610 or PCD3.F261 and the F-Box ‘Dali Cfg Manger’ does not work correctly? (FAQ #101900)
  • Why does my RS-232 S-Bus communication not work with the PCD2.F2xx0 and PCD3.F2xx module? (FAQ #101775)
  • Why do I get the error "Missing value" when reading some M-Bus devices? (FAQ #101762)
  • Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717)
  • Why can't I read data from a CALEC aquametro energy master device? (FAQ #101710)
  • How to Download a Firmware to a PCD2.F2xxx or PCD3.F2xx Module (FAQ #101688)
  • What is new in the SBC M-Bus library 2.7.006? (FAQ #101604)
  • Why do some M-Bus devices not work on all ports of a PCD2.M5 or a PCD3? (FAQ #101382)
  • A PCD2.W3x0 conflicts with a PCD2.F2xx0 or a PCD2.R6000 on a PCD2.M5xxx (FAQ #101262)
  • Communication in Bus Terminal topology doesn't work on PCDx.F2xx Module! (FAQ #101091)
  • Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems (FAQ #100655)

PCD3 / Fxxx

  • Are the LonWorks devices PCD2.F240, PCD3.F2400 and PCD7.R582 still available? (FAQ #102064)
  • Why are the inputs and outputs of a PCD3 systems not switched on and off correctly, or switched on and off randomly, or the I/O status not detected correctly in the PLC? (FAQ #102063)
  • Does the PCD support the MP-Bus light protocol and it’s possible connect up to 16 Belimo devices to one MP-Bus line? (FAQ #102016)
  • It’s possible to connect more than 8 MP-Bus devices on a MP-bus line (F180 or F280/F280 card)? (FAQ #102015)
  • Why the configuration of the DALI devices over PCD2.F2610 or PCD3.F261 and the F-Box ‘Dali Cfg Manger’ does not work correctly? (FAQ #101900)
  • PCD3.F27x and PCD2.F27xx M-Bus is not always short cut protected! (FAQ #101870)
  • Why does my RS-232 S-Bus communication not work with the PCD2.F2xx0 and PCD3.F2xx module? (FAQ #101775)
  • Why do I get the error "Missing value" when reading some M-Bus devices? (FAQ #101762)
  • Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717)
  • Why can't I read data from a CALEC aquametro energy master device? (FAQ #101710)
  • How to Download a Firmware to a PCD2.F2xxx or PCD3.F2xx Module (FAQ #101688)
  • What is new in the SBC M-Bus library 2.7.006? (FAQ #101604)
  • Why do some M-Bus devices not work on all ports of a PCD2.M5 or a PCD3? (FAQ #101382)
  • Incompatibility of PCD7.F121 with PCD2.F2xxx / PCD3.F2xx (FAQ #101380)
  • Is Modbus supported by Saia PCD®s? (FAQ #101270)
  • Communication in Bus Terminal topology doesn't work on PCDx.F2xx Module! (FAQ #101091)
  • Why does the communication on the PCD3.F281 not work? (FAQ #101090)
  • Where can I plug flash memory modules on a PCD3 CPU? (FAQ #101027)
  • Why does my S-Bus communication with an PCD3.F2xx module show a diagnostic error? (FAQ #101011)
  • Is it possible to have more than one MP-Bus master in a Fupla File? (FAQ #100958)
  • Why is it no more possible to build an old Belimo MP-Bus project with PG5 1.4.300? (FAQ #100957)
  • Supported PCD communication ports for EIB/KNX driver (FAQ #100792)
  • Callback of PCD7.R500 module (FAQ #100783)
  • Why are all MP-Bus FBoxes green but all values are zero? (FAQ #100744)
  • Can I use the character mode with XON/XOFF protocol on NT-PCD's? (FAQ #100700)
  • Why does my PCD3.F180 stop communicating after a certain time? (FAQ #100693)
  • Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems (FAQ #100655)
  • Possible reasons for not working PCD3.F1xx (FAQ #100649)
  • Why does a PCD7.F120 not work when used on a PCD3 or a PCD2.M5? (FAQ #100646)
  • Conflict between communication module (PCD3.F1xx) and memory module (PCD3.Rxxx) (FAQ #100636)
  • PCD3 with MP-Bus interface card PCD3.F180 - Error: No card echo (FAQ #100611)
  • Intelligent modules aren't correctly detected on HW version older than "D" (FAQ #100549)
  • Serial-S-Bus on RS422 issues (FAQ #100378)
  • Label with connection diagramm on PCD3.F150 (first series) can be wrong (FAQ #100350)
  • What is the difference between PCD7.F120 and PCD7.F121? (FAQ #100313)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download